Full I18N support for xconfig.
Signed-off-by: Egry Gabor <[EMAIL PROTECTED]>
---
scripts/kconfig/qconf.cc | 93 +++++++++++++++++++++++------------------------
1 files changed, 47 insertions(+), 46 deletions(-)
diff -puN scripts/kconfig/qconf.cc~kconfig-i18n-15-qconfig-i18n
scripts/kconfig/qconf.cc
---
linux-2.6.13-rc3-i18n-kconfig/scripts/kconfig/qconf.cc~kconfig-i18n-15-qconfig-i18n
2005-07-13 18:32:19.000000000 +0200
+++ linux-2.6.13-rc3-i18n-kconfig-gabaman/scripts/kconfig/qconf.cc
2005-07-13 18:36:41.000000000 +0200
@@ -192,7 +192,7 @@ void ConfigItem::updateMenu(void)
sym = menu->sym;
prop = menu->prompt;
- prompt = QString::fromLocal8Bit(menu_get_prompt(menu));
+ prompt = _(menu_get_prompt(menu));
if (prop) switch (prop->type) {
case P_MENU:
@@ -286,7 +286,7 @@ void ConfigItem::updateMenu(void)
break;
}
if (!sym_has_value(sym) && visible)
- prompt += " (NEW)";
+ prompt += _(" (NEW)");
set_prompt:
setText(promptColIdx, prompt);
}
@@ -415,7 +415,7 @@ ConfigList::ConfigList(ConfigView* p, Co
for (i = 0; i < colNr; i++)
colMap[i] = colRevMap[i] = -1;
- addColumn(promptColIdx, "Option");
+ addColumn(promptColIdx, _("Option"));
reinit();
}
@@ -429,14 +429,14 @@ void ConfigList::reinit(void)
removeColumn(nameColIdx);
if (showName)
- addColumn(nameColIdx, "Name");
+ addColumn(nameColIdx, _("Name"));
if (showRange) {
addColumn(noColIdx, "N");
addColumn(modColIdx, "M");
addColumn(yesColIdx, "Y");
}
if (showData)
- addColumn(dataColIdx, "Value");
+ addColumn(dataColIdx, _("Value"));
updateListAll();
}
@@ -860,50 +860,50 @@ ConfigMainWindow::ConfigMainWindow(void)
configList->setFocus();
menu = menuBar();
- toolBar = new QToolBar("Tools", this);
+ toolBar = new QToolBar(_("Tools"), this);
- backAction = new QAction("Back", QPixmap(xpm_back), "Back", 0, this);
+ backAction = new QAction(_("Back"), QPixmap(xpm_back), _("Back"), 0,
this);
connect(backAction, SIGNAL(activated()), SLOT(goBack()));
backAction->setEnabled(FALSE);
- QAction *quitAction = new QAction("Quit", "&Quit", CTRL+Key_Q, this);
+ QAction *quitAction = new QAction(_("Quit"), _("&Quit"), CTRL+Key_Q,
this);
connect(quitAction, SIGNAL(activated()), SLOT(close()));
- QAction *loadAction = new QAction("Load", QPixmap(xpm_load), "&Load",
CTRL+Key_L, this);
+ QAction *loadAction = new QAction(_("Load"), QPixmap(xpm_load),
_("&Load"), CTRL+Key_L, this);
connect(loadAction, SIGNAL(activated()), SLOT(loadConfig()));
- QAction *saveAction = new QAction("Save", QPixmap(xpm_save), "&Save",
CTRL+Key_S, this);
+ QAction *saveAction = new QAction(_("Save"), QPixmap(xpm_save),
_("&Save"), CTRL+Key_S, this);
connect(saveAction, SIGNAL(activated()), SLOT(saveConfig()));
- QAction *saveAsAction = new QAction("Save As...", "Save &As...", 0,
this);
+ QAction *saveAsAction = new QAction(_("Save As..."), _("Save &As..."),
0, this);
connect(saveAsAction, SIGNAL(activated()), SLOT(saveConfigAs()));
- QAction *singleViewAction = new QAction("Single View",
QPixmap(xpm_single_view), "Split View", 0, this);
+ QAction *singleViewAction = new QAction(_("Single View"),
QPixmap(xpm_single_view), _("Split View"), 0, this);
connect(singleViewAction, SIGNAL(activated()),
SLOT(showSingleView()));
- QAction *splitViewAction = new QAction("Split View",
QPixmap(xpm_split_view), "Split View", 0, this);
+ QAction *splitViewAction = new QAction(_("Split View"),
QPixmap(xpm_split_view), _("Split View"), 0, this);
connect(splitViewAction, SIGNAL(activated()), SLOT(showSplitView()));
- QAction *fullViewAction = new QAction("Full View",
QPixmap(xpm_tree_view), "Full View", 0, this);
+ QAction *fullViewAction = new QAction(_("Full View"),
QPixmap(xpm_tree_view), _("Full View"), 0, this);
connect(fullViewAction, SIGNAL(activated()), SLOT(showFullView()));
- QAction *showNameAction = new QAction(NULL, "Show Name", 0, this);
+ QAction *showNameAction = new QAction(NULL, _("Show Name"), 0, this);
showNameAction->setToggleAction(TRUE);
showNameAction->setOn(configList->showName);
connect(showNameAction, SIGNAL(toggled(bool)),
SLOT(setShowName(bool)));
- QAction *showRangeAction = new QAction(NULL, "Show Range", 0, this);
+ QAction *showRangeAction = new QAction(NULL, _("Show Range"), 0, this);
showRangeAction->setToggleAction(TRUE);
showRangeAction->setOn(configList->showRange);
connect(showRangeAction, SIGNAL(toggled(bool)),
SLOT(setShowRange(bool)));
- QAction *showDataAction = new QAction(NULL, "Show Data", 0, this);
+ QAction *showDataAction = new QAction(NULL, _("Show Data"), 0, this);
showDataAction->setToggleAction(TRUE);
showDataAction->setOn(configList->showData);
connect(showDataAction, SIGNAL(toggled(bool)),
SLOT(setShowData(bool)));
- QAction *showAllAction = new QAction(NULL, "Show All Options", 0, this);
+ QAction *showAllAction = new QAction(NULL, _("Show All Options"), 0,
this);
showAllAction->setToggleAction(TRUE);
showAllAction->setOn(configList->showAll);
connect(showAllAction, SIGNAL(toggled(bool)), SLOT(setShowAll(bool)));
- QAction *showDebugAction = new QAction(NULL, "Show Debug Info", 0,
this);
+ QAction *showDebugAction = new QAction(NULL, _("Show Debug Info"), 0,
this);
showDebugAction->setToggleAction(TRUE);
showDebugAction->setOn(showDebug);
connect(showDebugAction, SIGNAL(toggled(bool)),
SLOT(setShowDebug(bool)));
- QAction *showIntroAction = new QAction(NULL, "Introduction", 0, this);
+ QAction *showIntroAction = new QAction(NULL, _("Introduction"), 0,
this);
connect(showIntroAction, SIGNAL(activated()), SLOT(showIntro()));
- QAction *showAboutAction = new QAction(NULL, "About", 0, this);
+ QAction *showAboutAction = new QAction(NULL, _("About"), 0, this);
connect(showAboutAction, SIGNAL(activated()), SLOT(showAbout()));
// init tool bar
@@ -918,7 +918,7 @@ ConfigMainWindow::ConfigMainWindow(void)
// create config menu
QPopupMenu* config = new QPopupMenu(this);
- menu->insertItem("&File", config);
+ menu->insertItem(_("&File"), config);
loadAction->addTo(config);
saveAction->addTo(config);
saveAsAction->addTo(config);
@@ -927,7 +927,7 @@ ConfigMainWindow::ConfigMainWindow(void)
// create options menu
QPopupMenu* optionMenu = new QPopupMenu(this);
- menu->insertItem("&Option", optionMenu);
+ menu->insertItem(_("&Option"), optionMenu);
showNameAction->addTo(optionMenu);
showRangeAction->addTo(optionMenu);
showDataAction->addTo(optionMenu);
@@ -938,7 +938,7 @@ ConfigMainWindow::ConfigMainWindow(void)
// create help menu
QPopupMenu* helpMenu = new QPopupMenu(this);
menu->insertSeparator();
- menu->insertItem("&Help", helpMenu);
+ menu->insertItem(_("&Help"), helpMenu);
showIntroAction->addTo(helpMenu);
showAboutAction->addTo(helpMenu);
@@ -981,6 +981,7 @@ static QString print_filter(const QStrin
{
QRegExp re("[<>&\"\\n]");
QString res = str;
+
for (int i = 0; (i = res.find(re, i)) >= 0;) {
switch (res[i].latin1()) {
case '<':
@@ -1050,13 +1051,13 @@ void ConfigMainWindow::setHelp(QListView
head += "<br><br>";
if (showDebug) {
- debug += "type: ";
+ debug += _("type: ");
debug += print_filter(sym_type_name(sym->type));
if (sym_is_choice(sym))
- debug += " (choice)";
+ debug += _(" (choice)");
debug += "<br>";
if (sym->rev_dep.expr) {
- debug += "reverse dep: ";
+ debug += _("reverse dep: ");
expr_print(sym->rev_dep.expr, expr_print_help,
&debug, E_NONE);
debug += "<br>";
}
@@ -1064,34 +1065,34 @@ void ConfigMainWindow::setHelp(QListView
switch (prop->type) {
case P_PROMPT:
case P_MENU:
- debug += "prompt: ";
+ debug += _("prompt: ");
debug += print_filter(_(prop->text));
debug += "<br>";
break;
case P_DEFAULT:
- debug += "default: ";
+ debug += _("default: ");
expr_print(prop->expr, expr_print_help,
&debug, E_NONE);
debug += "<br>";
break;
case P_CHOICE:
if (sym_is_choice(sym)) {
- debug += "choice: ";
+ debug += _("choice: ");
expr_print(prop->expr,
expr_print_help, &debug, E_NONE);
debug += "<br>";
}
break;
case P_SELECT:
- debug += "select: ";
+ debug += _("select: ");
expr_print(prop->expr, expr_print_help,
&debug, E_NONE);
debug += "<br>";
break;
case P_RANGE:
- debug += "range: ";
+ debug += _("range: ");
expr_print(prop->expr, expr_print_help,
&debug, E_NONE);
debug += "<br>";
break;
default:
- debug += "unknown property: ";
+ debug += _("unknown property: ");
debug += prop_get_type_name(prop->type);
debug += "<br>";
}
@@ -1118,7 +1119,7 @@ void ConfigMainWindow::setHelp(QListView
}
}
if (showDebug)
- debug += QString().sprintf("defined at %s:%d<br><br>",
menu->file->name, menu->lineno);
+ debug += QString().sprintf(_("defined at %s:%d<br><br>"),
menu->file->name, menu->lineno);
helpText->setText(head + debug + help);
}
@@ -1128,14 +1129,14 @@ void ConfigMainWindow::loadConfig(void)
if (s.isNull())
return;
if (conf_read(QFile::encodeName(s)))
- QMessageBox::information(this, "qconf", "Unable to load
configuration!");
+ QMessageBox::information(this, "qconf", _("Unable to load
configuration!"));
ConfigView::updateListAll();
}
void ConfigMainWindow::saveConfig(void)
{
if (conf_write(NULL))
- QMessageBox::information(this, "qconf", "Unable to save
configuration!");
+ QMessageBox::information(this, "qconf", _("Unable to save
configuration!"));
}
void ConfigMainWindow::saveConfigAs(void)
@@ -1144,7 +1145,7 @@ void ConfigMainWindow::saveConfigAs(void
if (s.isNull())
return;
if (conf_write(QFile::encodeName(s)))
- QMessageBox::information(this, "qconf", "Unable to save
configuration!");
+ QMessageBox::information(this, "qconf", _("Unable to save
configuration!"));
}
void ConfigMainWindow::changeMenu(struct menu *menu)
@@ -1280,11 +1281,11 @@ void ConfigMainWindow::closeEvent(QClose
e->accept();
return;
}
- QMessageBox mb("qconf", "Save configuration?", QMessageBox::Warning,
+ QMessageBox mb("qconf", _("Save configuration?"), QMessageBox::Warning,
QMessageBox::Yes | QMessageBox::Default,
QMessageBox::No, QMessageBox::Cancel | QMessageBox::Escape);
- mb.setButtonText(QMessageBox::Yes, "&Save Changes");
- mb.setButtonText(QMessageBox::No, "&Discard Changes");
- mb.setButtonText(QMessageBox::Cancel, "Cancel Exit");
+ mb.setButtonText(QMessageBox::Yes, _("&Save Changes"));
+ mb.setButtonText(QMessageBox::No, _("&Discard Changes"));
+ mb.setButtonText(QMessageBox::Cancel, _("Cancel Exit"));
switch (mb.exec()) {
case QMessageBox::Yes:
conf_write(NULL);
@@ -1299,7 +1300,7 @@ void ConfigMainWindow::closeEvent(QClose
void ConfigMainWindow::showIntro(void)
{
- static char str[] = "Welcome to the qconf graphical kernel
configuration tool for Linux.\n\n"
+ static const QString str = _("Welcome to the qconf graphical kernel
configuration tool for Linux.\n\n"
"For each option, a blank box indicates the feature is
disabled, a check\n"
"indicates it is enabled, and a dot indicates that it is to be
compiled\n"
"as a module. Clicking on the box will cycle through the three
states.\n\n"
@@ -1309,15 +1310,15 @@ void ConfigMainWindow::showIntro(void)
"options must be enabled to support the option you are
interested in, you can\n"
"still view the help of a grayed-out option.\n\n"
"Toggling Show Debug Info under the Options menu will show the
dependencies,\n"
- "which you can then match by examining other options.\n\n";
+ "which you can then match by examining other options.\n\n");
QMessageBox::information(this, "qconf", str);
}
void ConfigMainWindow::showAbout(void)
{
- static char str[] = "qconf is Copyright (C) 2002 Roman Zippel <[EMAIL
PROTECTED]>.\n\n"
- "Bug reports and feature request can also be entered at
http://bugzilla.kernel.org/\n";;
+ static const QString str = _("qconf is Copyright (C) 2002 Roman Zippel
<[EMAIL PROTECTED]>.\n\n"
+ "Bug reports and feature request can also be entered at
http://bugzilla.kernel.org/\n";);
QMessageBox::information(this, "qconf", str);
}
@@ -1379,7 +1380,7 @@ static const char *progname;
static void usage(void)
{
- printf("%s <config>\n", progname);
+ printf(_("%s <config>\n"), progname);
exit(0);
}
_
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
