Hello Doug, On 02/25/2015 07:11 PM, Doug Anderson wrote: > We really don't want to get a card detect interrupt during probe time > since it can confuse things. Let's disable the card detect interrupt > until we're in a really good place: the end of probe. Let's also > simply avoid enabling the card detect interrupt if it's not used. > > It appears that (at least on rk3288) when vqmmc is turned on it can > cause a bogus "card detect" interrupt. That meant that we were > getting a predictable card detect interrupt while we were in > mmc_add_host(). On the version of the kernel I'm working with at > least (3.14), this is not a great time to get a card detect interrupt > since I think that we don't grab all the needed locks in > mmc_add_host() and children. I put stack dumps in dw_mci_setup_bus() > and found that I could see two distinct stack crawls that looked like: > > Caller one: > * dw_mci_setup_bus > * dw_mci_set_ios > * mmc_power_up > * mmc_start_host > * mmc_add_host > > Caller two: > * dw_mci_setup_bus > * dw_mci_set_ios > * mmc_set_chip_select > * mmc_go_idle > * mmc_rescan > * process_one_work > * worker_thread > * kthread > > Signed-off-by: Doug Anderson <diand...@chromium.org> >
On an Exynos5250 Snow, Exynos5420 Peach Pit and Exynos5800 Peach Pi: Tested-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk> Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/