Commit-ID: d8bf368d0631d4bc2612d8bf2e4e8e74e620d0cc
Gitweb: http://git.kernel.org/tip/d8bf368d0631d4bc2612d8bf2e4e8e74e620d0cc
Author: Valentin Rothberg <[email protected]>
AuthorDate: Thu, 5 Mar 2015 15:23:08 +0100
Committer: Ingo Molnar <[email protected]>
CommitDate: Thu, 5 Mar 2015 20:53:06 +0100
genirq: Remove the deprecated 'IRQF_DISABLED' request_irq() flag entirely
The IRQF_DISABLED flag is a NOOP and has been scheduled for removal
since Linux v2.6.36 by commit 6932bf37bed4 ("genirq: Remove
IRQF_DISABLED from core code").
According to commit e58aa3d2d0cc ("genirq: Run irq handlers with
interrupts disabled"), running IRQ handlers with interrupts
enabled can cause stack overflows when the interrupt line of the
issuing device is still active.
This patch ends the grace period for IRQF_DISABLED (i.e.,
SA_INTERRUPT in older versions of Linux) and removes the
definition and all remaining usages of this flag.
There's still a few non-functional references left in the kernel
source:
- The bigger hunk in Documentation/scsi/ncr53c8xx.txt is removed entirely
as IRQF_DISABLED is gone now; the usage in older kernel versions
(including the old SA_INTERRUPT flag) should be discouraged. The
trouble of using IRQF_SHARED is a general problem and not specific to
any driver.
- I left the reference in Documentation/PCI/MSI-HOWTO.txt untouched since
it has already been removed in linux-next.
- All remaining references are changelogs that I suggest to keep.
Signed-off-by: Valentin Rothberg <[email protected]>
Cc: Afzal Mohammed <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Brian Norris <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Ewan Milne <[email protected]>
Cc: Eyal Perry <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Hongliang Tao <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Keerthy <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Nishanth Menon <[email protected]>
Cc: Paul Bolle <[email protected]>
Cc: Peter Ujfalusi <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Quentin Lambert <[email protected]>
Cc: Rajendra Nayak <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Santosh Shilimkar <[email protected]>
Cc: Sricharan R <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Lindgren <[email protected]>
Cc: Zhou Wang <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link:
http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
---
Documentation/scsi/ncr53c8xx.txt | 25 -------------------------
Documentation/scsi/tmscsim.txt | 4 ----
arch/mips/loongson/loongson-3/hpet.c | 2 +-
drivers/block/cpqarray.c | 4 ++--
drivers/bus/omap_l3_noc.c | 4 ++--
drivers/bus/omap_l3_smx.c | 10 ++++------
drivers/mtd/nand/hisi504_nand.c | 3 +--
drivers/usb/isp1760/isp1760-core.c | 3 +--
drivers/usb/isp1760/isp1760-udc.c | 4 ++--
include/linux/interrupt.h | 3 ---
10 files changed, 13 insertions(+), 49 deletions(-)
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index 1d508dc..8586eff 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -786,7 +786,6 @@ port address 0x1400.
irqm:1 same as initial settings (assumed BIOS settings)
irqm:2 always totem pole
irqm:0x10 driver will not use IRQF_SHARED flag when requesting irq
- irqm:0x20 driver will not use IRQF_DISABLED flag when requesting irq
(Bits 0x10 and 0x20 can be combined with hardware irq mode option)
@@ -1231,30 +1230,6 @@ they only refer to system buffers that are well aligned.
So, a work around
may only be needed under Linux when a scatter/gather list is not used and
when the SCSI DATA IN phase is reentered after a phase mismatch.
-14.5 IRQ sharing problems
-
-When an IRQ is shared by devices that are handled by different drivers, it
-may happen that one driver complains about the request of the IRQ having
-failed. Inder Linux-2.0, this may be due to one driver having requested the
-IRQ using the IRQF_DISABLED flag but some other having requested the same IRQ
-without this flag. Under both Linux-2.0 and linux-2.2, this may be caused by
-one driver not having requested the IRQ with the IRQF_SHARED flag.
-
-By default, the ncr53c8xx and sym53c8xx drivers request IRQs with both the
-IRQF_DISABLED and the IRQF_SHARED flag under Linux-2.0 and with only the
IRQF_SHARED
-flag under Linux-2.2.
-
-Under Linux-2.0, you can disable use of IRQF_DISABLED flag from the boot
-command line by using the following option:
-
- ncr53c8xx=irqm:0x20 (for the generic ncr53c8xx driver)
- sym53c8xx=irqm:0x20 (for the sym53c8xx driver)
-
-If this does not fix the problem, then you may want to check how all other
-drivers are requesting the IRQ and report the problem. Note that if at least
-a single driver does not request the IRQ with the IRQF_SHARED flag (share IRQ),
-then the request of the IRQ obviously will not succeed for all the drivers.
-
15. SCSI problem troubleshooting
15.1 Problem tracking
diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt
index 0810132..0e0322b 100644
--- a/Documentation/scsi/tmscsim.txt
+++ b/Documentation/scsi/tmscsim.txt
@@ -107,10 +107,6 @@ produced errors and started to corrupt my disks. So don't
do that! A 37.50
MHz PCI bus works for me, though, but I don't recommend using higher clocks
than the 33.33 MHz being in the PCI spec.
-If you want to share the IRQ with another device and the driver refuses to
-do so, you might succeed with changing the DC390_IRQ type in tmscsim.c to
-IRQF_SHARED | IRQF_DISABLED.
-
3.Features
----------
diff --git a/arch/mips/loongson/loongson-3/hpet.c
b/arch/mips/loongson/loongson-3/hpet.c
index e898d68..5c21cd3 100644
--- a/arch/mips/loongson/loongson-3/hpet.c
+++ b/arch/mips/loongson/loongson-3/hpet.c
@@ -162,7 +162,7 @@ static irqreturn_t hpet_irq_handler(int irq, void *data)
static struct irqaction hpet_irq = {
.handler = hpet_irq_handler,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
+ .flags = IRQF_NOBALANCING | IRQF_TIMER,
.name = "hpet",
};
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 2b94403..f749df9 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -405,8 +405,8 @@ static int cpqarray_register_ctlr(int i, struct pci_dev
*pdev)
goto Enomem4;
}
hba[i]->access.set_intr_mask(hba[i], 0);
- if (request_irq(hba[i]->intr, do_ida_intr,
- IRQF_DISABLED|IRQF_SHARED, hba[i]->devname, hba[i]))
+ if (request_irq(hba[i]->intr, do_ida_intr, IRQF_SHARED,
+ hba[i]->devname, hba[i]))
{
printk(KERN_ERR "cpqarray: Unable to get irq %d for %s\n",
hba[i]->intr, hba[i]->devname);
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index 029bc73..11f7982 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -284,7 +284,7 @@ static int omap_l3_probe(struct platform_device *pdev)
*/
l3->debug_irq = platform_get_irq(pdev, 0);
ret = devm_request_irq(l3->dev, l3->debug_irq, l3_interrupt_handler,
- IRQF_DISABLED, "l3-dbg-irq", l3);
+ 0x0, "l3-dbg-irq", l3);
if (ret) {
dev_err(l3->dev, "request_irq failed for %d\n",
l3->debug_irq);
@@ -293,7 +293,7 @@ static int omap_l3_probe(struct platform_device *pdev)
l3->app_irq = platform_get_irq(pdev, 1);
ret = devm_request_irq(l3->dev, l3->app_irq, l3_interrupt_handler,
- IRQF_DISABLED, "l3-app-irq", l3);
+ 0x0, "l3-app-irq", l3);
if (ret)
dev_err(l3->dev, "request_irq failed for %d\n", l3->app_irq);
diff --git a/drivers/bus/omap_l3_smx.c b/drivers/bus/omap_l3_smx.c
index 597fdae..360a5c0 100644
--- a/drivers/bus/omap_l3_smx.c
+++ b/drivers/bus/omap_l3_smx.c
@@ -251,18 +251,16 @@ static int omap3_l3_probe(struct platform_device *pdev)
}
l3->debug_irq = platform_get_irq(pdev, 0);
- ret = request_irq(l3->debug_irq, omap3_l3_app_irq,
- IRQF_DISABLED | IRQF_TRIGGER_RISING,
- "l3-debug-irq", l3);
+ ret = request_irq(l3->debug_irq, omap3_l3_app_irq, IRQF_TRIGGER_RISING,
+ "l3-debug-irq", l3);
if (ret) {
dev_err(&pdev->dev, "couldn't request debug irq\n");
goto err1;
}
l3->app_irq = platform_get_irq(pdev, 1);
- ret = request_irq(l3->app_irq, omap3_l3_app_irq,
- IRQF_DISABLED | IRQF_TRIGGER_RISING,
- "l3-app-irq", l3);
+ ret = request_irq(l3->app_irq, omap3_l3_app_irq, IRQF_TRIGGER_RISING,
+ "l3-app-irq", l3);
if (ret) {
dev_err(&pdev->dev, "couldn't request app irq\n");
goto err2;
diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c
index 289ad3a..8dcc7b8 100644
--- a/drivers/mtd/nand/hisi504_nand.c
+++ b/drivers/mtd/nand/hisi504_nand.c
@@ -758,8 +758,7 @@ static int hisi_nfc_probe(struct platform_device *pdev)
hisi_nfc_host_init(host);
- ret = devm_request_irq(dev, irq, hinfc_irq_handle, IRQF_DISABLED,
- "nandc", host);
+ ret = devm_request_irq(dev, irq, hinfc_irq_handle, 0x0, "nandc", host);
if (ret) {
dev_err(dev, "failed to request IRQ\n");
goto err_res;
diff --git a/drivers/usb/isp1760/isp1760-core.c
b/drivers/usb/isp1760/isp1760-core.c
index b982755..5c37f40 100644
--- a/drivers/usb/isp1760/isp1760-core.c
+++ b/drivers/usb/isp1760/isp1760-core.c
@@ -151,8 +151,7 @@ int isp1760_register(struct resource *mem, int irq,
unsigned long irqflags,
}
if (IS_ENABLED(CONFIG_USB_ISP1761_UDC) && !udc_disabled) {
- ret = isp1760_udc_register(isp, irq, irqflags | IRQF_SHARED |
- IRQF_DISABLED);
+ ret = isp1760_udc_register(isp, irq, irqflags | IRQF_SHARED);
if (ret < 0) {
isp1760_hcd_unregister(&isp->hcd);
return ret;
diff --git a/drivers/usb/isp1760/isp1760-udc.c
b/drivers/usb/isp1760/isp1760-udc.c
index 9612d79..0b46ff0 100644
--- a/drivers/usb/isp1760/isp1760-udc.c
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -1451,8 +1451,8 @@ int isp1760_udc_register(struct isp1760_device *isp, int
irq,
sprintf(udc->irqname, "%s (udc)", devname);
- ret = request_irq(irq, isp1760_udc_irq, IRQF_SHARED | IRQF_DISABLED |
- irqflags, udc->irqname, udc);
+ ret = request_irq(irq, isp1760_udc_irq, IRQF_SHARED | irqflags,
+ udc->irqname, udc);
if (ret < 0)
goto error;
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 3bb01b9..2cee176 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -39,8 +39,6 @@
* These flags used only by the kernel as part of the
* irq handling routines.
*
- * IRQF_DISABLED - keep irqs disabled when calling the action handler.
- * DEPRECATED. This flag is a NOOP and scheduled to be removed
* IRQF_SHARED - allow sharing the irq among several devices
* IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to
occur
* IRQF_TIMER - Flag to mark this interrupt as timer interrupt
@@ -58,7 +56,6 @@
* IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
* resume time.
*/
-#define IRQF_DISABLED 0x00000020
#define IRQF_SHARED 0x00000080
#define IRQF_PROBE_SHARED 0x00000100
#define __IRQF_TIMER 0x00000200
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
