With multi platform support those sections could lead to unexpected
behavior if both ARCH_AT91 and another ARM SoC using the MACB IP are
selected.
Add two new capabilities to encode the default MII mode and the presence
of a CLKEN bit in USRIO register.
Then define the appropriate config for IPs embedded in at91 SoCs.

Signed-off-by: Boris Brezillon <boris.brezil...@free-electrons.com>
Reviewed-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
---
 drivers/net/ethernet/cadence/macb.c | 32 +++++++++++++++++---------------
 drivers/net/ethernet/cadence/macb.h |  2 ++
 2 files changed, 19 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.c 
b/drivers/net/ethernet/cadence/macb.c
index ad76b8e..86e915f 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -2113,6 +2113,10 @@ static const struct net_device_ops macb_netdev_ops = {
 };
 
 #if defined(CONFIG_OF)
+static struct macb_config at91sam9260_config = {
+       .caps = MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII,
+};
+
 static struct macb_config pc302gem_config = {
        .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE,
        .dma_burst_length = 16,
@@ -2130,7 +2134,7 @@ static struct macb_config sama5d4_config = {
 
 static const struct of_device_id macb_dt_ids[] = {
        { .compatible = "cdns,at32ap7000-macb" },
-       { .compatible = "cdns,at91sam9260-macb" },
+       { .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config },
        { .compatible = "cdns,macb" },
        { .compatible = "cdns,pc302-gem", .data = &pc302gem_config },
        { .compatible = "cdns,gem", .data = &pc302gem_config },
@@ -2388,21 +2392,19 @@ static int macb_probe(struct platform_device *pdev)
                bp->phy_interface = err;
        }
 
+       config = 0;
        if (bp->phy_interface == PHY_INTERFACE_MODE_RGMII)
-               macb_or_gem_writel(bp, USRIO, GEM_BIT(RGMII));
-       else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII)
-#if defined(CONFIG_ARCH_AT91)
-               macb_or_gem_writel(bp, USRIO, (MACB_BIT(RMII) |
-                                              MACB_BIT(CLKEN)));
-#else
-               macb_or_gem_writel(bp, USRIO, 0);
-#endif
-       else
-#if defined(CONFIG_ARCH_AT91)
-               macb_or_gem_writel(bp, USRIO, MACB_BIT(CLKEN));
-#else
-               macb_or_gem_writel(bp, USRIO, MACB_BIT(MII));
-#endif
+               config = GEM_BIT(RGMII);
+       else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII &&
+                (bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII))
+               config = MACB_BIT(RMII);
+       else if (!(bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII))
+               config = MACB_BIT(MII);
+
+       if (bp->caps & MACB_CAPS_USRIO_HAS_CLKEN)
+               config |= MACB_BIT(CLKEN);
+
+       macb_or_gem_writel(bp, USRIO, config);
 
        err = register_netdev(dev);
        if (err) {
diff --git a/drivers/net/ethernet/cadence/macb.h 
b/drivers/net/ethernet/cadence/macb.h
index 31dc080..efe0247 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -389,6 +389,8 @@
 
 /* Capability mask bits */
 #define MACB_CAPS_ISR_CLEAR_ON_WRITE           0x00000001
+#define MACB_CAPS_USRIO_HAS_CLKEN              0x00000002
+#define MACB_CAPS_USRIO_DEFAULT_IS_MII         0x00000004
 #define MACB_CAPS_FIFO_MODE                    0x10000000
 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE       0x20000000
 #define MACB_CAPS_SG_DISABLED                  0x40000000
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to