Hi, Karol.
This patch can't apply. You need to rebase on latest mmc-next.
Then i will check this patch.
Best Regards,
Jaehoon Chung
On 03/06/2015 10:29 PM, Karol Wrona wrote:
> This patch adds runtime pm handling to dw_mmc.
> It mainly uses mci_request/mci_request_end for mmc host state information.
> The goal of the runtime pm in dw_mmc host is mainly for giving an information
> for containing it power domain about its activity.
>
> Signed-off-by: Karol Wrona <k.wr...@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.p...@samsung.com>
> ---
> drivers/mmc/host/dw_mmc.c | 99
> ++++++++++++++++++++++++++++++++++++++++++---
> drivers/mmc/host/dw_mmc.h | 2 +
> 2 files changed, 95 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 4d2e3c2..ad8b71e 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -38,6 +38,7 @@
> #include <linux/of.h>
> #include <linux/of_gpio.h>
> #include <linux/mmc/slot-gpio.h>
> +#include <linux/pm_runtime.h>
>
> #include "dw_mmc.h"
>
> @@ -112,6 +113,8 @@ static int dw_mci_req_show(struct seq_file *s, void *v)
> struct mmc_command *stop;
> struct mmc_data *data;
>
> + pm_runtime_get_sync(slot->host->dev);
> +
> /* Make sure we get a consistent snapshot */
> spin_lock_bh(&slot->host->lock);
> mrq = slot->mrq;
> @@ -141,6 +144,9 @@ static int dw_mci_req_show(struct seq_file *s, void *v)
>
> spin_unlock_bh(&slot->host->lock);
>
> + pm_runtime_mark_last_busy(slot->host->dev);
> + pm_runtime_put_autosuspend(slot->host->dev);
> +
> return 0;
> }
>
> @@ -1043,6 +1049,8 @@ static void dw_mci_request(struct mmc_host *mmc, struct
> mmc_request *mrq)
>
> WARN_ON(slot->mrq);
>
> + pm_runtime_get_sync(host->dev);
> +
> /*
> * The check for card presence and queueing of the request must be
> * atomic, otherwise the card could be removed in between and the
> @@ -1054,6 +1062,9 @@ static void dw_mci_request(struct mmc_host *mmc, struct
> mmc_request *mrq)
> spin_unlock_bh(&host->lock);
> mrq->cmd->error = -ENOMEDIUM;
> mmc_request_done(mmc, mrq);
> +
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> return;
> }
>
> @@ -1081,6 +1092,8 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct
> mmc_ios *ios)
> slot->ctype = SDMMC_CTYPE_1BIT;
> }
>
> + pm_runtime_get_sync(slot->host->dev);
> +
> regs = mci_readl(slot->host, UHS_REG);
>
> /* DDR mode set */
> @@ -1116,7 +1129,7 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct
> mmc_ios *ios)
> dev_err(slot->host->dev,
> "failed to enable vmmc regulator\n");
> /*return, if failed turn on vmmc*/
> - return;
> + goto _end;
> }
> }
> set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
> @@ -1150,6 +1163,10 @@ static void dw_mci_set_ios(struct mmc_host *mmc,
> struct mmc_ios *ios)
> default:
> break;
> }
> +
> +_end:
> + pm_runtime_mark_last_busy(slot->host->dev);
> + pm_runtime_put_autosuspend(slot->host->dev);
> }
>
> static int dw_mci_card_busy(struct mmc_host *mmc)
> @@ -1157,12 +1174,17 @@ static int dw_mci_card_busy(struct mmc_host *mmc)
> struct dw_mci_slot *slot = mmc_priv(mmc);
> u32 status;
>
> + pm_runtime_get_sync(slot->host->dev);
> +
> /*
> * Check the busy bit which is low when DAT[3:0]
> * (the data lines) are 0000
> */
> status = mci_readl(slot->host, STATUS);
>
> + pm_runtime_mark_last_busy(slot->host->dev);
> + pm_runtime_put_autosuspend(slot->host->dev);
> +
> return !!(status & SDMMC_STATUS_BUSY);
> }
>
> @@ -1175,6 +1197,8 @@ static int dw_mci_switch_voltage(struct mmc_host *mmc,
> struct mmc_ios *ios)
> int min_uv, max_uv;
> int ret;
>
> + pm_runtime_get_sync(host->dev);
> +
> /*
> * Program the voltage. Note that some instances of dw_mmc may use
> * the UHS_REG for this. For other instances (like exynos) the UHS_REG
> @@ -1197,11 +1221,17 @@ static int dw_mci_switch_voltage(struct mmc_host
> *mmc, struct mmc_ios *ios)
> dev_dbg(&mmc->class_dev,
> "Regulator set error %d: %d - %d\n",
> ret, min_uv, max_uv);
> +
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> return ret;
> }
> }
> mci_writel(host, UHS_REG, uhs);
>
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> +
> return 0;
> }
>
> @@ -1211,6 +1241,8 @@ static int dw_mci_get_ro(struct mmc_host *mmc)
> struct dw_mci_slot *slot = mmc_priv(mmc);
> int gpio_ro = mmc_gpio_get_ro(mmc);
>
> + pm_runtime_get_sync(slot->host->dev);
> +
> /* Use platform get_ro function, else try on board write protect */
> if ((slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT) ||
> (slot->host->quirks & DW_MCI_QUIRK_NO_WRITE_PROTECT))
> @@ -1221,6 +1253,9 @@ static int dw_mci_get_ro(struct mmc_host *mmc)
> read_only =
> mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0;
>
> + pm_runtime_mark_last_busy(slot->host->dev);
> + pm_runtime_put_autosuspend(slot->host->dev);
> +
> dev_dbg(&mmc->class_dev, "card is %s\n",
> read_only ? "read-only" : "read-write");
>
> @@ -1235,6 +1270,8 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
> struct dw_mci *host = slot->host;
> int gpio_cd = mmc_gpio_get_cd(mmc);
>
> + pm_runtime_get_sync(host->dev);
> +
> /* Use platform get_cd function, else try onboard card detect */
> if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
> present = 1;
> @@ -1254,6 +1291,9 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
> }
> spin_unlock_bh(&host->lock);
>
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> +
> return present;
> }
>
> @@ -1262,6 +1302,8 @@ static void dw_mci_init_card(struct mmc_host *mmc,
> struct mmc_card *card)
> struct dw_mci_slot *slot = mmc_priv(mmc);
> struct dw_mci *host = slot->host;
>
> + pm_runtime_get_sync(host->dev);
> +
> /*
> * Low power mode will stop the card clock when idle. According to the
> * description of the CLKENA register we should disable low power mode
> @@ -1289,6 +1331,9 @@ static void dw_mci_init_card(struct mmc_host *mmc,
> struct mmc_card *card)
> SDMMC_CMD_PRV_DAT_WAIT, 0);
> }
> }
> +
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> }
>
> static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
> @@ -1298,6 +1343,9 @@ static void dw_mci_enable_sdio_irq(struct mmc_host
> *mmc, int enb)
> unsigned long irqflags;
> u32 int_mask;
>
> + if (enb)
> + pm_runtime_get_sync(slot->host->dev);
> +
> spin_lock_irqsave(&host->irq_lock, irqflags);
>
> /* Enable/disable Slot Specific SDIO interrupt */
> @@ -1309,6 +1357,12 @@ static void dw_mci_enable_sdio_irq(struct mmc_host
> *mmc, int enb)
> mci_writel(host, INTMASK, int_mask);
>
> spin_unlock_irqrestore(&host->irq_lock, irqflags);
> +
> + /* If interrupt is enabled leave device active. */
> + if (!enb) {
> + pm_runtime_mark_last_busy(slot->host->dev);
> + pm_runtime_put_autosuspend(slot->host->dev);
> + }
> }
>
> static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
> @@ -1318,8 +1372,14 @@ static int dw_mci_execute_tuning(struct mmc_host *mmc,
> u32 opcode)
> const struct dw_mci_drv_data *drv_data = host->drv_data;
> int err = -ENOSYS;
>
> + pm_runtime_get_sync(host->dev);
> +
> if (drv_data && drv_data->execute_tuning)
> err = drv_data->execute_tuning(slot);
> +
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> +
> return err;
> }
>
> @@ -1359,10 +1419,14 @@ static void dw_mci_request_end(struct dw_mci *host,
> struct mmc_request *mrq)
> } else {
> dev_vdbg(host->dev, "list empty\n");
>
> - if (host->state == STATE_SENDING_CMD11)
> + if (host->state == STATE_SENDING_CMD11) {
> host->state = STATE_WAITING_CMD11_DONE;
> - else
> + } else {
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> +
> host->state = STATE_IDLE;
> + }
> }
>
> spin_unlock(&host->lock);
> @@ -2595,6 +2659,11 @@ int dw_mci_probe(struct dw_mci *host)
> return -ENODEV;
> }
>
> + pm_runtime_enable(host->dev);
> + pm_runtime_get_sync(host->dev);
> + pm_runtime_set_autosuspend_delay(host->dev, DWMMC_AUTOSUSPEND_DELAY);
> + pm_runtime_use_autosuspend(host->dev);
> +
> host->biu_clk = devm_clk_get(host->dev, "biu");
> if (IS_ERR(host->biu_clk)) {
> dev_dbg(host->dev, "biu clock not available\n");
> @@ -2781,6 +2850,9 @@ int dw_mci_probe(struct dw_mci *host)
> if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
> dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
>
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> +
> return 0;
>
> err_dmaunmap:
> @@ -2795,6 +2867,9 @@ err_clk_biu:
> if (!IS_ERR(host->biu_clk))
> clk_disable_unprepare(host->biu_clk);
>
> + pm_runtime_put_sync(host->dev);
> + pm_runtime_disable(host->dev);
> +
> return ret;
> }
> EXPORT_SYMBOL(dw_mci_probe);
> @@ -2803,6 +2878,8 @@ void dw_mci_remove(struct dw_mci *host)
> {
> int i;
>
> + pm_runtime_get_sync(host->dev);
> +
> mci_writel(host, RINTSTS, 0xFFFFFFFF);
> mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
>
> @@ -2819,6 +2896,9 @@ void dw_mci_remove(struct dw_mci *host)
> if (host->use_dma && host->dma_ops->exit)
> host->dma_ops->exit(host);
>
> + pm_runtime_put_sync(host->dev);
> + pm_runtime_disable(host->dev);
> +
> if (!IS_ERR(host->ciu_clk))
> clk_disable_unprepare(host->ciu_clk);
>
> @@ -2841,11 +2921,14 @@ EXPORT_SYMBOL(dw_mci_suspend);
>
> int dw_mci_resume(struct dw_mci *host)
> {
> - int i, ret;
> + int i;
> +
> + pm_runtime_get_sync(host->dev);
>
> if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) {
> - ret = -ENODEV;
> - return ret;
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> + return -ENODEV;
> }
>
> if (host->use_dma && host->dma_ops->init)
> @@ -2876,6 +2959,10 @@ int dw_mci_resume(struct dw_mci *host)
> dw_mci_setup_bus(slot, true);
> }
> }
> +
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> +
> return 0;
> }
> EXPORT_SYMBOL(dw_mci_resume);
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index 18c4afe..6a364f4f 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -209,6 +209,8 @@ extern int dw_mci_suspend(struct dw_mci *host);
> extern int dw_mci_resume(struct dw_mci *host);
> #endif
>
> +#define DWMMC_AUTOSUSPEND_DELAY 50
> +
> /**
> * struct dw_mci_slot - MMC slot state
> * @mmc: The mmc_host representing this slot.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
