Dear Sergei,
Thanks very much for suggestion.
I will fix them in the next version.
On Fri, 2015-03-06 at 17:48 +0300, Sergei Shtylyov wrote:
> Hello.
>
> On 3/6/2015 1:48 PM, yong...@mediatek.com wrote:
>
> > From: Yong Wu <yong...@mediatek.com>
>
> > This patch add smi binding document.
>
> > Signed-off-by: Yong Wu <yong...@mediatek.com>
> > ---
> > .../devicetree/bindings/soc/mediatek/mediatek,smi.txt | 17
> > +++++++++++++++++
> > 1 file changed, 17 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
>
> > diff --git
> > a/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
> > b/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
> > new file mode 100644
> > index 0000000..0fc9d1a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
> > @@ -0,0 +1,17 @@
> > +SMI hardware block diagram please help check
> > <bindings/iommu/mediatek,iommu.txt>
> > +
> > +Required properties:
> > +- compatible : must be "mediatek,mediatek,mt8173-smi-larb"
>
> One "mediatek," is enough. :-)
>
> > +- reg : the register of each local arbiter
> > +- clocks : the clocks of each local arbiter
> > +- clock-name: larb_sub*(3 clockes at most)
>
> clock-names.
>
> > +
> > +Example:
> > + larb1:larb@16010000 {
> > + compatible = "mediatek,mt8173-smi-larb";
> > + reg = <0 0x16010000 0 0x1000>;
> > + clocks = <&mmsys MM_SMI_COMMON>,
> > + <&vdecsys VDEC_CKEN>,
>
> Please align with the < above.
>
> > + <&vdecsys VDEC_LARB_CKEN>;
>
> Use tabs instead of spaces, please.
>
> > + clock-names = "larb_sub0", "larb_sub1", "larb_sub2";
> > + };
>
> WBR, Sergei
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
