+Cc James Liao <jamesjj.l...@mediatek.com>
On Mon, Mar 09, 2015 at 02:35:03PM -0700, Kevin Hilman wrote:
> Sascha Hauer <s.ha...@pengutronix.de> writes:
>
> > Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
>
> A bit of a changelog here would be useful describing this driver, that
> it's only covering part of the device (e.g. power controller) with more
> to come, dependency on the syscon driver, etc.
>
> > +/*
> > + * The Infracfg unit has bus protection bits. We enable the bus protection
> > + * for disabled power domains so that the system does not hang when some
> > unit
> > + * accesses the bus while in power down.
> > + */
>
> Hmm, why don't you want to know if some device is accessing another
> device which is in a domain that is powered down? Seems like this is a
> good way to hide real bugs.
How I understand it the system just hangs on erroneous accesses without
these protection bits enabled, so enabling them at least makes sure we
can output something.
I must admit though that my understanding of these bits is quite limited
and the only user of this driver I have available here (audio) doesn't
make use of these protection bits, so I can't test here.
James, could you shed some light on this issue?
> > + val = readl(ctl_addr);
> > + val |= PWR_ON_BIT;
> > + writel(val, ctl_addr);
> > + val |= PWR_ON_2ND_BIT;
> > + writel(val, ctl_addr);
> > +
> > + /* wait until PWR_ACK = 1 */
> > + expired = jiffies + HZ;
> > + while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> > + !(readl(scp->base + SPM_PWR_STATUS_2ND) &
> > data->sta_mask)) {
> > + cpu_relax();
> > + if (time_after(jiffies, expired))
> > + return -EIO;
>
> hmm, seems like you'd want a dev_warn() or simliar here if this times
> out and fails. There's a bunch of these below too.
Ok, will add.
> > + /* Clear bus protection bits */
> > + if (data->bus_prot_mask) {
> > + u32 mask = data->bus_prot_mask;
> > + struct regmap *infracfg = scp->infracfg;
> > +
> > + regmap_update_bits(infracfg, INFRA_TOPAXI_PROTECTEN, mask, 0);
> > +
> > + expired = jiffies + HZ;
> > +
> > + while (1) {
> > + u32 val;
> > +
> > + ret = regmap_read(infracfg, INFRA_TOPAXI_PROTECTSTA1,
> > &val);
> > + if (ret)
> > + return ret;
> > +
> > + if (!(val & mask))
> > + break;
> > +
> > + cpu_relax();
> > + if (time_after(jiffies, expired))
> > + return -EIO;
> > + }
> > + }
>
> This whole "Clear bus protection bits" part seems like it should be an
> API in the infracfg driver.
Ok, can do.
>
> > + return 0;
> > +}
> > +
> > +static int scpsys_power_off(struct generic_pm_domain *genpd)
> > +{
> > + struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> > + struct scp *scp = scpd->scp;
> > + struct scp_domain_data *data = scpd->data;
> > + unsigned long expired;
> > + void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> > + u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> > + u32 val;
> > + int ret;
> > +
> > + /* set bus protection bits */
> > + if (data->bus_prot_mask) {
> > + struct regmap *infracfg = scp->infracfg;
> > + u32 mask = data->bus_prot_mask;
> > +
> > + regmap_update_bits(infracfg, INFRA_TOPAXI_PROTECTEN, mask,
> > mask);
> > +
> > + expired = jiffies + HZ;
> > +
> > + while (1) {
> > + ret = regmap_read(infracfg, INFRA_TOPAXI_PROTECTSTA1,
> > &val);
> > + if (ret)
> > + return ret;
> > +
> > + if ((val & mask) == mask)
> > + break;
> > +
> > + cpu_relax();
> > + if (time_after(jiffies, expired))
> > + return -EIO;
> > + }
> > + }
>
> As with the 'clear bus protection bits', seems like this should be a
> call into the infracfg driver.
>
> > + val = readl(ctl_addr);
> > + val |= data->sram_pdn_bits;
> > + writel(val, ctl_addr);
> > +
> > + /* wait until SRAM_PDN_ACK all 1 */
> > + expired = jiffies + HZ;
> > + while ((readl(ctl_addr) & sram_pdn_ack) != sram_pdn_ack) {
> > + cpu_relax();
> > + if (time_after(jiffies, expired))
> > + return -EIO;
> > + }
> > +
> > + val |= PWR_ISO_BIT;
> > + writel(val, ctl_addr);
> > +
> > + val &= ~PWR_RST_B_BIT;
> > + writel(val, ctl_addr);
> > +
> > + val |= PWR_CLK_DIS_BIT;
> > + writel(val, ctl_addr);
> > +
> > + val &= ~PWR_ON_BIT;
> > + writel(val, ctl_addr);
> > +
> > + val &= ~PWR_ON_2ND_BIT;
> > + writel(val, ctl_addr);
> > +
> > + /* wait until PWR_ACK = 0 */
> > + expired = jiffies + HZ;
> > + while ((readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> > + (readl(scp->base + SPM_PWR_STATUS_2ND) &
> > data->sta_mask)) {
> > + cpu_relax();
> > + if (time_after(jiffies, expired))
> > + return -EIO;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int scpsys_probe(struct platform_device *pdev)
> > +{
> > + struct genpd_onecell_data *pd_data;
> > + struct resource *res;
> > + int i;
> > + struct scp *scp = devm_kzalloc(&pdev->dev, sizeof(*scp), GFP_KERNEL);
>
> This might return NULL...
Actually I recently learned that this never fails [1], but the check is
missing accidently here. Will add it of course.
[1] http://lwn.net/Articles/627419/
>
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + scp->base = devm_ioremap_resource(&pdev->dev, res);
>
> ... and, boom.
>
> > + if (IS_ERR(scp->base))
> > + return PTR_ERR(scp->base);
> > +
> > + pd_data = &scp->pd_data;
> > +
> > + scp->infracfg =
> > syscon_regmap_lookup_by_compatible("mediatek,mt8173-infracfg");
> > + if (IS_ERR(scp->infracfg))
> > + return PTR_ERR(scp->infracfg);
> > +
> > + pd_data->domains = scp->pmd;
> > + pd_data->num_domains = NUM_DOMAINS;
> > +
> > + for (i = 0; i < NUM_DOMAINS; i++) {
> > + struct scp_domain *scpd = &scp->domains[i];
> > + struct generic_pm_domain *pmd = &scpd->pmd;
> > +
> > + scp->pmd[i] = pmd;
> > + scpd->data = &scp_domain_data[i];
> > + scpd->scp = scp;
> > +
> > + pmd->name = scp_domain_data[i].name;
> > + pmd->power_off = scpsys_power_off;
> > + pmd->power_on = scpsys_power_on;
> > + pmd->power_off_latency_ns = 20000;
> > + pmd->power_on_latency_ns = 20000;
>
> Are the latencies for all domains really the same? Seems like the
> latencies should be part of the per-domain data.
>
> Where did these numbers come from? HW specs, measurement, etc?
They are from measurement. actually they are around 11us.
>
> Also, eventually, these latencies can (and should) come from DT
> after the support from Geert[1] is merged, so putting them in the data
> struct for now
I agree for domains created from regulators somewhere on the board, but
in this case the domains are completely SoC internal. The
"mediatek,mt8173-scpsys" compatible gives me enough information so I see
no point adding this to the device tree.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
