From: Alan Cox <[EMAIL PROTECTED]> Date: Thu, Jul 21, 2005 at 08:30:13PM +0100 > On Iau, 2005-07-21 at 19:26 +0200, jurriaan wrote: > > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } > > hda: dma_intr: error=0x84 { DriveStatusError BadCRC } > > There was corruption on the cable between the controller and drive. That > usually indicates a cable or noise problem in the PC but could indicate > mistuning of the interface. Make sure the IDE cable is > > [controller]<---- long section ----->[slave]--short section-->[master] > > as one common cause is having the cable the other way around. The cable happens to run the correct way, but you've given me a valuable hint. I was wondering why hda had errors and hdc (which is the same drive on the second port of the controller) didn't. Perhaps I'll try another cable.
Thanks, Jurriaan -- IF MICROSOFT BUILT CARS...... You could only have one person in the car at a time, unless you bought "Car95" or "CarNT". But, then you would have to buy more seats. Debian (Unstable) GNU/Linux 2.6.13-rc3-mm1 5149 bogomips load 1.94 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/