On Wed, 11 Mar 2015, Luis R. Rodriguez wrote: > From: "Luis R. Rodriguez" <mcg...@suse.com> > > X86_UP_IOAPIC is a way so that 32-bit UP systems can enable > X86_IOAPIC. X86_UP_IOAPIC is only as a visible user option if > you are on a 32-bit system but have X86_UP_APIC enabled. X86_UP_APIC > will be enabled by force if you have PCI_MSI on 32-bit systems > now, X86_UP_APIC will now only be user selectable if you didn't > have PCI_MSI enabled and are also not on a X86_32_NON_STANDARD > system. Bryan's original patch (refactored commit log in commit > 38a1dfda) [0] describes that Intel CE, Intel MID and Intel Quark > are all 32-bit uniprocessor systems with IO-APICs, the code change > however only *re-enabled* UP_IOAPIC as an *option* when PCI_MSI > was enabled, but given that: > > 1) enabling X86_IOAPIC is the real end goal here > 2) enabling X86_IOAPIC only increases the kernel only by 12064 bytes (~12 KiB) > 3) enabling X86_IOAPIC will in no way slow down your kernel > > Let's make a compromise for 32-bit systems and always enable X86_IOAPIC > when X86_UP_IOAPIC is enabled as 32-bit systems are not in a state > of flux and the price for the size is small with no performance impact. > > Using: > > export ARCH=i386 > make allnoconfig > --> Enabling PCI_MSI > make localyesconfig > > With X86_IO_APIC: > mcgrof@ergon ~/linux-next (git::master)$ du -b arch/x86/boot/bzImage > 734608 arch/x86/boot/bzImage > > Without X86_IO_APIC: > mcgrof@ergon ~/linux-next (git::master)$ du -b arch/x86/boot/bzImage > 722544 arch/x86/boot/bzImage >
1.6% increase. > [0] https://lkml.org/lkml/2015/1/22/718 > > Cc: David Rientjes <rient...@google.com> > Cc: Bjorn Helgaas <bhelg...@google.com> > Cc: Bryan O'Donoghue <pure.lo...@nexus-software.ie> > Cc: Thomas Gleixner <t...@linutronix.de> > Cc: Andy Shevchenko <andy.shevche...@gmail.com> > Cc: Thomas Petazzoni <thomas.petazz...@free-electrons.com> > Cc: Ingo Molnar <mi...@kernel.org> > Cc: Borislav Petkov <b...@suse.de> > Cc: H. Peter Anvin <h...@zytor.com> > Cc: Jan Beulich <jbeul...@suse.com> > Cc: Juergen Gross <jgr...@suse.com> > Cc: linux-...@vger.kernel.org > Cc: x...@kernel.org > Signed-off-by: Luis R. Rodriguez <mcg...@suse.com> > --- > arch/x86/Kconfig | 15 ++------------- > 1 file changed, 2 insertions(+), 13 deletions(-) > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > index 110f6ae..b17a8ea 100644 > --- a/arch/x86/Kconfig > +++ b/arch/x86/Kconfig > @@ -899,6 +899,7 @@ config X86_UP_APIC > bool "Local APIC support on uniprocessors" if !PCI_MSI > default PCI_MSI > depends on X86_32 && !SMP && !X86_32_NON_STANDARD > + select X86_IO_APIC > ---help--- > A local APIC (Advanced Programmable Interrupt Controller) is an > integrated interrupt controller in the CPU. If you have a single-CPU > @@ -909,18 +910,6 @@ config X86_UP_APIC > performance counters), and the NMI watchdog which detects hard > lockups. > > -config X86_UP_IOAPIC > - bool "IO-APIC support on uniprocessors" > - depends on X86_UP_APIC > - ---help--- > - An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an > - SMP-capable replacement for PC-style interrupt controllers. Most > - SMP systems and many recent uniprocessor systems have one. > - > - If you have a single-CPU system with an IO-APIC, you can say Y here > - to use it. If you say Y here even though your machine doesn't have > - an IO-APIC, then the kernel will still run with no slowdown at all. > - > config X86_LOCAL_APIC > def_bool y > depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || > PCI_MSI > @@ -928,7 +917,7 @@ config X86_LOCAL_APIC > > config X86_IO_APIC > def_bool y > - depends on X86_LOCAL_APIC || X86_UP_IOAPIC > + depends on X86_LOCAL_APIC > select IRQ_DOMAIN > > config X86_REROUTE_FOR_BROKEN_BOOT_IRQS I think it would be best to remove the "select" so the "depends" for both config options won't diverge in the future. This should be equivalent, right? diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -909,18 +909,6 @@ config X86_UP_APIC performance counters), and the NMI watchdog which detects hard lockups. -config X86_UP_IOAPIC - bool "IO-APIC support on uniprocessors" - depends on X86_UP_APIC - ---help--- - An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an - SMP-capable replacement for PC-style interrupt controllers. Most - SMP systems and many recent uniprocessor systems have one. - - If you have a single-CPU system with an IO-APIC, you can say Y here - to use it. If you say Y here even though your machine doesn't have - an IO-APIC, then the kernel will still run with no slowdown at all. - config X86_LOCAL_APIC def_bool y depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI @@ -928,7 +916,7 @@ config X86_LOCAL_APIC config X86_IO_APIC def_bool y - depends on X86_LOCAL_APIC || X86_UP_IOAPIC + depends on X86_LOCAL_APIC || X86_UP_APIC select IRQ_DOMAIN config X86_REROUTE_FOR_BROKEN_BOOT_IRQS And then the second patch adds a 3.8% increase on top of this (and the two "select" statements in that patch shouldn't be necessary, both X86_LOCAL_APIC and X86_IO_APIC are def_bool y for PCI_MSI configs). If these are just cleanup patches, I'm not sure I understand why a considerable kernel text size increase is worth it. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
