On Wednesday, March 18, 2015 02:43:49 PM Krzysztof Kozlowski wrote:
> 2015-03-18 14:09 GMT+01:00 Bartlomiej Zolnierkiewicz
> <b.zolnier...@samsung.com>:
> > Add get_cpu_boot_addr() firmware operation and then
> > exynos_get_boot_addr() helper.
> >
> > This is a preparation for adding coupled cpuidle support
> > for Exynos3250 SoC.
> >
> > There should be no functional changes caused by this patch.
> >
> > Cc: Daniel Lezcano <daniel.lezc...@linaro.org>
> > Cc: Russell King <rmk+ker...@arm.linux.org.uk>
> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnier...@samsung.com>
> > ---
> > arch/arm/include/asm/firmware.h | 4 ++++
> > arch/arm/mach-exynos/firmware.c | 17 +++++++++++++++++
> > arch/arm/mach-exynos/platsmp.c | 25 +++++++++++++++++++++++++
> > 3 files changed, 46 insertions(+)
> >
> > diff --git a/arch/arm/include/asm/firmware.h
> > b/arch/arm/include/asm/firmware.h
> > index 89aefe1..34c1d96 100644
> > --- a/arch/arm/include/asm/firmware.h
> > +++ b/arch/arm/include/asm/firmware.h
> > @@ -34,6 +34,10 @@ struct firmware_ops {
> > */
> > int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr);
> > /*
> > + * Gets boot address of specified physical CPU
> > + */
> > + int (*get_cpu_boot_addr)(int cpu, unsigned long *boot_addr);
> > + /*
> > * Boots specified physical CPU
> > */
> > int (*cpu_boot)(int cpu);
> > diff --git a/arch/arm/mach-exynos/firmware.c
> > b/arch/arm/mach-exynos/firmware.c
> > index f236877..c9e4481 100644
> > --- a/arch/arm/mach-exynos/firmware.c
> > +++ b/arch/arm/mach-exynos/firmware.c
> > @@ -104,6 +104,22 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned
> > long boot_addr)
> > return 0;
> > }
> >
> > +static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr)
> > +{
> > + void __iomem *boot_reg;
> > +
> > + if (!sysram_ns_base_addr)
> > + return -ENODEV;
> > +
> > + boot_reg = sysram_ns_base_addr + 0x1c;
> > +
> > + if (soc_is_exynos4412())
> > + boot_reg += 4 * cpu;
> > +
> > + *boot_addr = __raw_readl(boot_reg);
> > + return 0;
> > +}
> > +
> > static int exynos_cpu_suspend(unsigned long arg)
> > {
> > flush_cache_all();
> > @@ -138,6 +154,7 @@ static int exynos_resume(void)
> > static const struct firmware_ops exynos_firmware_ops = {
> > .do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ?
> > exynos_do_idle : NULL,
> > .set_cpu_boot_addr = exynos_set_cpu_boot_addr,
> > + .get_cpu_boot_addr = exynos_get_cpu_boot_addr,
> > .cpu_boot = exynos_cpu_boot,
> > .suspend = IS_ENABLED(CONFIG_PM_SLEEP) ?
> > exynos_suspend : NULL,
> > .resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ?
> > exynos_resume : NULL,
> > diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
> > index b7cfcdc..449edd1 100644
> > --- a/arch/arm/mach-exynos/platsmp.c
> > +++ b/arch/arm/mach-exynos/platsmp.c
> > @@ -272,6 +272,31 @@ fail:
> > return ret;
> > }
> >
> > +static int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr)
> > +{
> > + int ret;
> > +
> > + /*
> > + * Try to get boot address using firmware first
> > + * and fall back to boot register if it fails.
> > + */
> > + ret = call_firmware_op(get_cpu_boot_addr, core_id, boot_addr);
> > + if (ret && ret != -ENOSYS)
> > + goto fail;
>
> The exynos_get_cpu_boot_addr() returns ENODEV. Do you really want to
> check for ENOSYS here?
Yes. When secure firmware is not present on the board the call_firmware_op()
itself returns -ENOSYS (exynos_get_cpu_boot_addr() is not called in this
case) and it needs to be handled in a special way.
> > + if (ret == -ENOSYS) {
> > + void __iomem *boot_reg = cpu_boot_reg(core_id);
> > +
> > + if (IS_ERR(boot_reg)) {
> > + ret = PTR_ERR(boot_reg);
> > + goto fail;
> > + }
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
