Hi Heikki,
On Wed, Mar 18, 2015 at 02:40:30PM +0200, Heikki Krogerus wrote:
> On some BYT platforms the USB2 PHY needs to be put into
> operational mode by the controller driver with GPIOs
> controlling the PHYs reset and cs signals.
>
> Signed-off-by: Heikki Krogerus <heikki.kroge...@linux.intel.com>
> ---
> drivers/usb/dwc3/dwc3-pci.c | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
> index b773fb5..01cfdbd 100644
> --- a/drivers/usb/dwc3/dwc3-pci.c
> +++ b/drivers/usb/dwc3/dwc3-pci.c
> @@ -21,6 +21,8 @@
> #include <linux/slab.h>
> #include <linux/pci.h>
> #include <linux/platform_device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/acpi.h>
>
> #include "platform_data.h"
>
> @@ -31,6 +33,15 @@
> #define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
> #define PCI_DEVICE_ID_INTEL_SPTH 0xa130
>
> +static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
> +static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
> +
> +static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
> + { "reset-gpios", &reset_gpios, 1 },
> + { "cs-gpios", &cs_gpios, 1 },
> + { },
> +};
> +
> static int dwc3_pci_quirks(struct pci_dev *pdev)
> {
> if (pdev->vendor == PCI_VENDOR_ID_AMD &&
> @@ -65,6 +76,31 @@ static int dwc3_pci_quirks(struct pci_dev *pdev)
> sizeof(pdata));
> }
>
> + if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
> + pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
> + struct gpio_desc *gpio;
> +
> + acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
> + acpi_dwc3_byt_gpios);
> +
> + gpio = gpiod_get(&pdev->dev, "reset");
> + if (IS_ERR(gpio))
> + return 0;
> +
> + /* These GPIOs will turn on the USB2 PHY */
> + gpiod_direction_output(gpio, 0);
> + gpiod_set_value_cansleep(gpio, 1);
> + gpiod_put(gpio);
> +
> + gpio = gpiod_get(&pdev->dev, "cs");
CS GPIO should be handled before RESET.
BR, David
> + if (!IS_ERR(gpio)) {
> + gpiod_direction_output(gpio, 0);
> + gpiod_set_value_cansleep(gpio, 1);
> + gpiod_put(gpio);
> + }
> + msleep(10);
> + }
> +
> return 0;
> }
>
> --
> 2.1.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
