Hi, The Berlin ADC provides 8 channels, with one connected to a temperature sensor. The temperature sensor has its own registers and both the ADC and the temperature sensor need to be configured when using it.
This series is based on the two Berlin controllers rework series: - https://lkml.org/lkml/2015/3/6/511 - https://lkml.org/lkml/2015/3/6/535 Antoine Antoine Tenart (4): iio: adc: add support for Berlin Documentation: bindings: document the Berlin ADC driver ARM: berlin: add an ADC node for the BG2Q ARM: berlin: enable the ADC on the BG2Q DMP .../devicetree/bindings/iio/adc/berlin2_adc.txt | 19 + arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 4 + arch/arm/boot/dts/berlin2q.dtsi | 8 + drivers/iio/adc/Kconfig | 7 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/berlin-adc.c | 397 +++++++++++++++++++++ 6 files changed, 436 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt create mode 100644 drivers/iio/adc/berlin-adc.c -- 2.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
