On Sat, Apr 04, 2015 at 12:23:14PM -0400, Peter Hurley wrote:
> On 04/04/2015 12:09 PM, Greg Kroah-Hartman wrote:
> > On Sat, Apr 04, 2015 at 10:27:30AM -0400, Peter Hurley wrote:
> >> Restore undocumented behavior of kernel command line parameters of
> >> the forms:
> >> console=uart[8250],io|mmio|mmio32,<addr>[,options]
> >> console=uart[8250],<addr>[,options]
> >> where 'options' have not been specified; in this case, the hardware
> >> is assumed to be initialized.
> >>
> >> Document the required behavior of the original implementation.
> >>
> >> Fixes: c7cef0a84912cab3c9df8 ("console: Add extensible console matching")
> >> Reported-by: Yinghai Lu <[email protected]>
> >> Signed-off-by: Peter Hurley <[email protected]>
> >> ---
> >>
> >> v3: Fixed automatic console to port line settings initialization;
> >> open-coded serial8250_console_setup() so the baud can be probed;
> >> added sha reference in commit log
> >>
> >> v2: Fixed regression which allowed "console=uart1337,..." to start a
> >> console (but not an earlycon)
> >> + fixed earlycon= documentation related required behavior fixed by
> >> this patch
> >>
> >> Documentation/kernel-parameters.txt | 18 ++++++++++++++---
> >> drivers/tty/serial/8250/8250_core.c | 38
> >> +++++++++++++++++++++++++++++++++---
> >> drivers/tty/serial/8250/8250_early.c | 19 ------------------
> >> 3 files changed, 50 insertions(+), 25 deletions(-)
> >>
> >> diff --git a/Documentation/kernel-parameters.txt
> >> b/Documentation/kernel-parameters.txt
> >> index bfcb1a6..1facf0b 100644
> >> --- a/Documentation/kernel-parameters.txt
> >> +++ b/Documentation/kernel-parameters.txt
> >> @@ -713,10 +713,18 @@ bytes respectively. Such letter suffixes can also be
> >> entirely omitted.
> >>
> >> uart[8250],io,<addr>[,options]
> >> uart[8250],mmio,<addr>[,options]
> >> + uart[8250],mmio32,<addr>[,options]
> >> + uart[8250],0x<addr>[,options]
> >> Start an early, polled-mode console on the 8250/16550
> >> UART at the specified I/O port or MMIO address,
> >> - switching to the matching ttyS device later. The
> >> - options are the same as for ttyS, above.
> >> + switching to the matching ttyS device later.
> >> + MMIO inter-register address stride is either 8-bit
> >> + (mmio) or 32-bit (mmio32).
> >> + If none of [io|mmio|mmio32], <addr> is assumed to be
> >> + equivalent to 'mmio'. 'options' are specified in the
> >> + same format described for ttyS above; if unspecified,
> >> + the h/w is not re-initialized.
> >> +
> >> hvc<n> Use the hypervisor console device <n>. This is for
> >> both Xen and PowerPC hypervisors.
> >>
> >> @@ -944,11 +952,15 @@ bytes respectively. Such letter suffixes can also be
> >> entirely omitted.
> >> uart[8250],io,<addr>[,options]
> >> uart[8250],mmio,<addr>[,options]
> >> uart[8250],mmio32,<addr>[,options]
> >> + uart[8250],0x<addr>[,options]
> >> Start an early, polled-mode console on the 8250/16550
> >> UART at the specified I/O port or MMIO address.
> >> MMIO inter-register address stride is either 8-bit
> >> (mmio) or 32-bit (mmio32).
> >> - The options are the same as for ttyS, above.
> >> + If none of [io|mmio|mmio32], <addr> is assumed to be
> >> + equivalent to 'mmio'. 'options' are specified in the
> >> + same format described for "console=ttyS<n>"; if
> >> + unspecified, the h/w is not initialized.
> >>
> >> pl011,<addr>
> >> Start an early, polled-mode console on a pl011 serial
> >> diff --git a/drivers/tty/serial/8250/8250_core.c
> >> b/drivers/tty/serial/8250/8250_core.c
> >> index e0fb5f0..f59c7a0 100644
> >> --- a/drivers/tty/serial/8250/8250_core.c
> >> +++ b/drivers/tty/serial/8250/8250_core.c
> >> @@ -3447,6 +3447,22 @@ static int univ8250_console_setup(struct console
> >> *co, char *options)
> >> return serial8250_console_setup(up, options);
> >> }
> >>
> >> +/* FIXME: this is broken on most other 8250 h/w */
> >
> > What do you mean by "most other"? What hardware does this work for?
> > What is it broken for? What is someone supposed to think/do with this
> > comment?
>
> It's a direct copy of the existing behavior for 8250 earlycon, which is
> broken for h/w with non-standard divisor registers. That's basically
> _every_ new design, because that's what vendors need to extend to support
> modern bitrates.
>
> Affected h/w that I know of includes: 8250_dw, exar xr17v35 cards, omap8250,
> omap15xx, intel byt, intel mid.
>
> But it was already broken for these and so not a regression.
Sorry, I know the function is a copy, you haven't broken anything that
wasn't already broken. I see this comment as a "rant", but we might as
well turn that "rant" into something descriptive to let other people
know what is really going on here.
Sound reasonable?
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
