Use common interface to simplify ACPI PCI host bridge implementation.
Signed-off-by: Jiang Liu <jiang....@linux.intel.com>
---
arch/x86/pci/acpi.c | 281 +++++++++++++--------------------------------------
1 file changed, 72 insertions(+), 209 deletions(-)
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index e7f35dc84801..b52a4d96bc89 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -4,13 +4,12 @@
#include <linux/irq.h>
#include <linux/dmi.h>
#include <linux/slab.h>
+#include <linux/pci-acpi.h>
#include <asm/numa.h>
#include <asm/pci_x86.h>
struct pci_root_info {
- struct acpi_device *bridge;
- char name[16];
- struct pci_controller sd;
+ struct acpi_pci_root_info_common common;
#ifdef CONFIG_PCI_MMCONFIG
bool mcfg_added;
u16 segment;
@@ -165,14 +164,17 @@ static int check_segment(u16 seg, struct device *dev,
char *estr)
return 0;
}
-static int setup_mcfg_map(struct pci_root_info *info, u16 seg, u8 start,
- u8 end, phys_addr_t addr)
+static int setup_mcfg_map(struct acpi_pci_root_info_common *ci)
{
int result;
- struct device *dev = &info->bridge->dev;
+ struct pci_root_info *info;
+ struct acpi_pci_root *root = ci->root;
+ struct device *dev = &ci->bridge->dev;
+ int seg = ci->controller.segment;
- info->start_bus = start;
- info->end_bus = end;
+ info = container_of(ci, struct pci_root_info, common);
+ info->start_bus = (u8)root->secondary.start;
+ info->end_bus = (u8)root->secondary.end;
info->mcfg_added = false;
/* return success if MMCFG is not in use */
@@ -182,7 +184,8 @@ static int setup_mcfg_map(struct pci_root_info *info, u16
seg, u8 start,
if (!(pci_probe & PCI_PROBE_MMCONF))
return check_segment(seg, dev, "MMCONFIG is disabled,");
- result = pci_mmconfig_insert(dev, seg, start, end, addr);
+ result = pci_mmconfig_insert(dev, seg, info->start_bus, info->end_bus,
+ root->mcfg_addr);
if (result == 0) {
/* enable MMCFG if it hasn't been enabled yet */
if (raw_pci_ext_ops == NULL)
@@ -195,8 +198,11 @@ static int setup_mcfg_map(struct pci_root_info *info, u16
seg, u8 start,
return 0;
}
-static void teardown_mcfg_map(struct pci_root_info *info)
+static void teardown_mcfg_map(struct acpi_pci_root_info_common *ci)
{
+ struct pci_root_info *info;
+
+ info = container_of(ci, struct pci_root_info, common);
if (info->mcfg_added) {
pci_mmconfig_delete(info->segment, info->start_bus,
info->end_bus);
@@ -204,170 +210,80 @@ static void teardown_mcfg_map(struct pci_root_info *info)
}
}
#else
-static int setup_mcfg_map(struct pci_root_info *info,
- u16 seg, u8 start, u8 end,
- phys_addr_t addr)
+static int setup_mcfg_map(struct acpi_pci_root_info_common *ci)
{
return 0;
}
-static void teardown_mcfg_map(struct pci_root_info *info)
+
+static void teardown_mcfg_map(struct acpi_pci_root_info_common *ci)
{
}
#endif
-static void validate_resources(struct device *dev, struct list_head *crs_res,
- unsigned long type)
+static int pci_acpi_root_get_node(struct acpi_pci_root *root)
{
- LIST_HEAD(list);
- struct resource *res1, *res2, *root = NULL;
- struct resource_entry *tmp, *entry, *entry2;
-
- BUG_ON((type & (IORESOURCE_MEM | IORESOURCE_IO)) == 0);
- root = (type & IORESOURCE_MEM) ? &iomem_resource : &ioport_resource;
-
- list_splice_init(crs_res, &list);
- resource_list_for_each_entry_safe(entry, tmp, &list) {
- bool free = false;
- resource_size_t end;
-
- res1 = entry->res;
- if (!(res1->flags & type))
- goto next;
-
- /* Exclude non-addressable range or non-addressable portion */
- end = min(res1->end, root->end);
- if (end <= res1->start) {
- dev_info(dev, "host bridge window %pR (ignored, not CPU
addressable)\n",
- res1);
- free = true;
- goto next;
- } else if (res1->end != end) {
- dev_info(dev, "host bridge window %pR ([%#llx-%#llx]
ignored, not CPU addressable)\n",
- res1, (unsigned long long)end + 1,
- (unsigned long long)res1->end);
- res1->end = end;
- }
-
- resource_list_for_each_entry(entry2, crs_res) {
- res2 = entry2->res;
- if (!(res2->flags & type))
- continue;
-
- /*
- * I don't like throwing away windows because then
- * our resources no longer match the ACPI _CRS, but
- * the kernel resource tree doesn't allow overlaps.
- */
- if (resource_overlaps(res1, res2)) {
- res2->start = min(res1->start, res2->start);
- res2->end = max(res1->end, res2->end);
- dev_info(dev, "host bridge window expanded to
%pR; %pR ignored\n",
- res2, res1);
- free = true;
- goto next;
- }
- }
-
-next:
- resource_list_del(entry);
- if (free)
- resource_list_free_entry(entry);
- else
- resource_list_add_tail(entry, crs_res);
+ int busnum = root->secondary.start;
+ struct acpi_device *device = root->device;
+ int node = acpi_get_node(device->handle);
+
+ if (node == NUMA_NO_NODE) {
+ node = x86_pci_root_bus_node(busnum);
+ if (node != 0 && node != NUMA_NO_NODE)
+ dev_info(&device->dev, FW_BUG "no _PXM; falling back to
node %d from hardware (may be inconsistent with ACPI node numbers)\n",
+ node);
}
+ if (node != NUMA_NO_NODE && !node_online(node))
+ node = NUMA_NO_NODE;
+
+ return node;
}
-static void add_resources(struct pci_root_info *info,
- struct list_head *resources,
- struct list_head *crs_res)
+static int pci_acpi_root_init_info(struct acpi_pci_root_info_common *ci)
{
- struct resource_entry *entry, *tmp;
- struct resource *res, *conflict, *root = NULL;
-
- validate_resources(&info->bridge->dev, crs_res, IORESOURCE_MEM);
- validate_resources(&info->bridge->dev, crs_res, IORESOURCE_IO);
-
- resource_list_for_each_entry_safe(entry, tmp, crs_res) {
- res = entry->res;
- if (res->flags & IORESOURCE_MEM)
- root = &iomem_resource;
- else if (res->flags & IORESOURCE_IO)
- root = &ioport_resource;
- else
- BUG_ON(res);
-
- conflict = insert_resource_conflict(root, res);
- if (conflict) {
- dev_info(&info->bridge->dev,
- "ignoring host bridge window %pR (conflicts
with %s %pR)\n",
- res, conflict->name, conflict);
- resource_list_destroy_entry(entry);
- }
- }
+ ci->controller.node = pci_acpi_root_get_node(ci->root);
+ if (pci_ignore_seg)
+ ci->controller.segment = 0;
- list_splice_tail(crs_res, resources);
+ return setup_mcfg_map(ci);
}
-static void release_pci_root_info(struct pci_host_bridge *bridge)
+static void pci_acpi_root_release_info(struct acpi_pci_root_info_common *ci)
{
- struct resource *res;
- struct resource_entry *entry;
- struct pci_root_info *info = bridge->release_data;
-
- resource_list_for_each_entry(entry, &bridge->windows) {
- res = entry->res;
- if (res->parent &&
- (res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
- release_resource(res);
- }
-
- teardown_mcfg_map(info);
- kfree(info);
+ teardown_mcfg_map(ci);
}
-static void probe_pci_root_info(struct pci_root_info *info,
- struct acpi_device *device,
- int busnum, int domain,
- struct list_head *list)
+static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info_common
*ci,
+ int status)
{
- int ret;
+ struct acpi_device *device = ci->bridge;
+ int busnum = ci->root->secondary.start;
struct resource_entry *entry, *tmp;
- unsigned long res_flags;
-
- sprintf(info->name, "PCI Bus %04x:%02x", domain, busnum);
- info->bridge = device;
- res_flags = IORESOURCE_IO | IORESOURCE_MEM |
- IORESOURCE_WINDOW | IORESOURCE_MEM_8AND16BIT;
- ret = acpi_dev_get_resources(device, list,
- acpi_dev_filter_resource_type_cb,
- (void *)res_flags);
- if (ret < 0)
- dev_warn(&device->dev,
- "failed to parse _CRS method, error code %d\n", ret);
- else if (ret == 0)
- dev_dbg(&device->dev,
- "no IO and memory resources present in _CRS\n");
- else
- resource_list_for_each_entry_safe(entry, tmp, list) {
- if (entry->res->flags & IORESOURCE_DISABLED)
- resource_list_destroy_entry(entry);
- else
- entry->res->name = info->name;
- }
+
+ if (pci_use_crs)
+ return status;
+
+ resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
+ dev_printk(KERN_DEBUG, &device->dev,
+ "host bridge window %pR (ignored)\n", entry->res);
+ resource_list_destroy_entry(entry);
+ }
+ x86_pci_root_bus_resources(busnum, &ci->resources);
+
+ return 0;
}
+static struct acpi_pci_root_ops acpi_pci_root_ops = {
+ .pci_ops = &pci_root_ops,
+ .init_info = pci_acpi_root_init_info,
+ .release_info = pci_acpi_root_release_info,
+ .prepare_resources = pci_acpi_root_prepare_resources,
+};
+
struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
{
- struct acpi_device *device = root->device;
- struct pci_root_info *info;
int domain = root->segment;
int busnum = root->secondary.start;
- struct resource_entry *res_entry;
- LIST_HEAD(crs_res);
- LIST_HEAD(resources);
struct pci_bus *bus;
- struct pci_controller *sd;
- int node;
if (pci_ignore_seg)
domain = 0;
@@ -379,72 +295,22 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root
*root)
return NULL;
}
- node = acpi_get_node(device->handle);
- if (node == NUMA_NO_NODE) {
- node = x86_pci_root_bus_node(busnum);
- if (node != 0 && node != NUMA_NO_NODE)
- dev_info(&device->dev, FW_BUG "no _PXM; falling back to
node %d from hardware (may be inconsistent with ACPI node numbers)\n",
- node);
- }
-
- if (node != NUMA_NO_NODE && !node_online(node))
- node = NUMA_NO_NODE;
-
- info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
- if (!info) {
- printk(KERN_WARNING "pci_bus %04x:%02x: "
- "ignored (out of memory)\n", domain, busnum);
- return NULL;
- }
-
- sd = &info->sd;
- sd->segment = domain;
- sd->node = node;
- sd->companion = device;
-
bus = pci_find_bus(domain, busnum);
if (bus) {
/*
* If the desired bus has been scanned already, replace
* its bus->sysdata.
*/
- memcpy(bus->sysdata, sd, sizeof(*sd));
- kfree(info);
+ struct pci_controller sd = {
+ .segment = domain,
+ .node = pci_acpi_root_get_node(root),
+ .companion = root->device
+ };
+ memcpy(bus->sysdata, &sd, sizeof(sd));
} else {
- /* insert busn res at first */
- pci_add_resource(&resources, &root->secondary);
-
- /*
- * _CRS with no apertures is normal, so only fall back to
- * defaults or native bridge info if we're ignoring _CRS.
- */
- probe_pci_root_info(info, device, busnum, domain, &crs_res);
- if (pci_use_crs) {
- add_resources(info, &resources, &crs_res);
- } else {
- resource_list_for_each_entry(res_entry, &crs_res)
- dev_printk(KERN_DEBUG, &device->dev,
- "host bridge window %pR (ignored)\n",
- res_entry->res);
- resource_list_free(&crs_res);
- x86_pci_root_bus_resources(busnum, &resources);
- }
-
- if (!setup_mcfg_map(info, domain, (u8)root->secondary.start,
- (u8)root->secondary.end, root->mcfg_addr))
- bus = pci_create_root_bus(NULL, busnum, &pci_root_ops,
- sd, &resources);
-
- if (bus) {
- pci_scan_child_bus(bus);
- pci_set_host_bridge_release(
- to_pci_host_bridge(bus->bridge),
- release_pci_root_info, info);
- } else {
- resource_list_free(&resources);
- teardown_mcfg_map(info);
- kfree(info);
- }
+ struct pci_root_info *info;
+ bus = acpi_pci_root_create(root, &acpi_pci_root_ops,
+ sizeof(*info) - sizeof(info->common));
}
/* After the PCI-E bus has been walked and all devices discovered,
@@ -456,9 +322,6 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root
*root)
pcie_bus_configure_settings(child);
}
- if (bus && node != NUMA_NO_NODE)
- dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
-
return bus;
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
