> -----Original Message-----
> From: Jonathan Cameron [mailto:ji...@kernel.org]
> Sent: 09 April, 2015 14:31
> To: Tirdea, Irina; linux-...@vger.kernel.org; Hartmut Knaack
> Cc: linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 1/8] iio: accel: mma9553: coding style fixes
>
> On 08/04/15 15:37, Irina Tirdea wrote:
> > Fix a couple of coding style issues including:
> > * issues reported by checkpatch.pl --strict
> > * add mma9553_ prefix to all local functions/declarations
> > * fix documentation
> > * use GENMASK instead of direct masks
> > * fix code alignment
> >
> > Signed-off-by: Irina Tirdea <irina.tir...@intel.com>
> > Suggested-by: Hartmut Knaack <knaac...@gmx.de>
> Please break this up into smaller focused patches as it's a mixture of
> various different things.
>
> First high urgency patches:
>
> Typo fixes
> Wrong docs fixes
>
> Then lower urgency (nice to have ones)
>
> Prefixing naming
> GENMASK
> Aligment
>
> So I'd say at least 5 short patches.
Sure, I'll break them into smaller patches.
Thanks for pointing out which are high urgency patches and which nice to have -
I wasn't sure which is which in this case.
> > ---
> > drivers/iio/accel/mma9551_core.c | 8 ++--
> > drivers/iio/accel/mma9551_core.h | 2 +-
> > drivers/iio/accel/mma9553.c | 98
> > ++++++++++++++++++++--------------------
> > 3 files changed, 55 insertions(+), 53 deletions(-)
> >
> > diff --git a/drivers/iio/accel/mma9551_core.c
> > b/drivers/iio/accel/mma9551_core.c
> > index 7f55a6d..54b3ae6 100644
> > --- a/drivers/iio/accel/mma9551_core.c
> > +++ b/drivers/iio/accel/mma9551_core.c
> > @@ -374,7 +374,7 @@ EXPORT_SYMBOL(mma9551_read_status_word);
> > * @app_id: Application ID
> > * @reg: Application register
> > * @len: Length of array to read in bytes
> > - * @val: Array of words to read
> > + * @buf: Array of words to read
> wrong docs aren't a style fix and probably want to go in faster so
> please break these out into a separate patch.
> > *
> > * Read multiple configuration registers (word-sized registers).
> > *
> > @@ -409,7 +409,7 @@ EXPORT_SYMBOL(mma9551_read_config_words);
> > * @app_id: Application ID
> > * @reg: Application register
> > * @len: Length of array to read in bytes
> > - * @val: Array of words to read
> > + * @buf: Array of words to read
> > *
> > * Read multiple status registers (word-sized registers).
> > *
> > @@ -444,7 +444,7 @@ EXPORT_SYMBOL(mma9551_read_status_words);
> > * @app_id: Application ID
> > * @reg: Application register
> > * @len: Length of array to write in bytes
> > - * @val: Array of words to write
> > + * @buf: Array of words to write
> > *
> > * Write multiple configuration registers (word-sized registers).
> > *
> > @@ -785,7 +785,7 @@ EXPORT_SYMBOL(mma9551_read_accel_scale);
> > */
> > int mma9551_app_reset(struct i2c_client *client, u32 app_mask)
> > {
> > - return mma9551_write_config_byte(client, MMA9551_APPID_RCS,
> This isn't a style fix. I'm guessing it is a straight fix for a typo?
> Please break this out to it's own patch. More important than style fixes.
>
> > + return mma9551_write_config_byte(client, MMA9551_APPID_RSC,
> > MMA9551_RSC_RESET +
> > MMA9551_RSC_OFFSET(app_mask),
> > MMA9551_RSC_VAL(app_mask));
> > diff --git a/drivers/iio/accel/mma9551_core.h
> > b/drivers/iio/accel/mma9551_core.h
> > index edaa56b..79939e4 100644
> > --- a/drivers/iio/accel/mma9551_core.h
> > +++ b/drivers/iio/accel/mma9551_core.h
> > @@ -22,7 +22,7 @@
> > #define MMA9551_APPID_TILT 0x0B
> > #define MMA9551_APPID_SLEEP_WAKE 0x12
> > #define MMA9551_APPID_PEDOMETER 0x15
> > -#define MMA9551_APPID_RCS 0x17
> > +#define MMA9551_APPID_RSC 0x17
> > #define MMA9551_APPID_NONE 0xff
> >
> > /* Reset/Suspend/Clear application app masks */
> > diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c
> > index 2df1af7..d095f81 100644
> > --- a/drivers/iio/accel/mma9553.c
> > +++ b/drivers/iio/accel/mma9553.c
> > @@ -54,6 +54,7 @@
> > #define MMA9553_MASK_CONF_STEPCOALESCE GENMASK(7, 0)
> >
> > #define MMA9553_REG_CONF_ACTTHD 0x0E
> > +#define MMA9553_MAX_ACTTHD GENMASK(15, 0)
> >
> > /* Pedometer status registers (R-only) */
> > #define MMA9553_REG_STATUS 0x00
> > @@ -62,8 +63,8 @@
> > #define MMA9553_MASK_STATUS_STEPCHG BIT(13)
> > #define MMA9553_MASK_STATUS_ACTCHG BIT(12)
> > #define MMA9553_MASK_STATUS_SUSP BIT(11)
> > -#define MMA9553_MASK_STATUS_ACTIVITY (BIT(10) | BIT(9) |
> > BIT(8))
> > -#define MMA9553_MASK_STATUS_VERSION 0x00FF
> > +#define MMA9553_MASK_STATUS_ACTIVITY GENMASK(10, 8)
> > +#define MMA9553_MASK_STATUS_VERSION GENMASK(7, 0)
> >
> > #define MMA9553_REG_STEPCNT 0x02
> > #define MMA9553_REG_DISTANCE 0x04
> > @@ -75,14 +76,14 @@
> > #define MMA9553_DEFAULT_GPIO_PIN mma9551_gpio6
> > #define MMA9553_DEFAULT_GPIO_POLARITY 0
> >
> > -/* Bitnum used for gpio configuration = bit number in high status byte */
> > -#define STATUS_TO_BITNUM(bit) (ffs(bit) - 9)
> > +/* Bitnum used for GPIO configuration = bit number in high status byte */
> > +#define MMA9553_STATUS_TO_BITNUM(bit) (ffs(bit) - 9)
> >
> > #define MMA9553_DEFAULT_SAMPLE_RATE 30 /* Hz */
> >
> > /*
> > * The internal activity level must be stable for ACTTHD samples before
> > - * ACTIVITY is updated.The ACTIVITY variable contains the current activity
> > + * ACTIVITY is updated. The ACTIVITY variable contains the current activity
> > * level and is updated every time a step is detected or once a second
> > * if there are no steps.
> > */
> > @@ -343,21 +344,21 @@ static int mma9553_conf_gpio(struct mma9553_data
> > *data)
> > struct mma9553_event *ev_step_detect;
> > bool activity_enabled;
> >
> > - activity_enabled =
> > - mma9553_is_any_event_enabled(data, true, IIO_ACTIVITY);
> > - ev_step_detect =
> > - mma9553_get_event(data, IIO_STEPS, IIO_NO_MOD, IIO_EV_DIR_NONE);
> > + activity_enabled = mma9553_is_any_event_enabled(data, true,
> > + IIO_ACTIVITY);
> > + ev_step_detect = mma9553_get_event(data, IIO_STEPS, IIO_NO_MOD,
> > + IIO_EV_DIR_NONE);
> This is defintlely a matter of taste rather than required, but fair enough
> in a style cleanup patch.
> >
> > /*
> > * If both step detector and activity are enabled, use the MRGFL bit.
> > * This bit is the logical OR of the SUSPCHG, STEPCHG, and ACTCHG flags.
> > */
> > if (activity_enabled && ev_step_detect->enabled)
> > - bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_MRGFL);
> > + bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_MRGFL);
> > else if (ev_step_detect->enabled)
> > - bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_STEPCHG);
> > + bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_STEPCHG);
> > else if (activity_enabled)
> > - bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_ACTCHG);
> > + bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_ACTCHG);
> > else /* Reset */
> > appid = MMA9551_APPID_NONE;
> >
> > @@ -365,13 +366,15 @@ static int mma9553_conf_gpio(struct mma9553_data
> > *data)
> > return 0;
> >
> > /* Save initial values for activity and stepcnt */
> > - if (activity_enabled || ev_step_detect->enabled)
> > - mma9553_read_activity_stepcnt(data, &data->activity,
> > - &data->stepcnt);
> > + if (activity_enabled || ev_step_detect->enabled) {
> > + ret = mma9553_read_activity_stepcnt(data, &data->activity,
> > + &data->stepcnt);
> > + if (ret < 0)
> > + return ret;
> > + }
> >
> > - ret = mma9551_gpio_config(data->client,
> > - MMA9553_DEFAULT_GPIO_PIN,
> > - appid, bitnum, MMA9553_DEFAULT_GPIO_POLARITY);
> > + ret = mma9551_gpio_config(data->client, MMA9553_DEFAULT_GPIO_PIN, appid,
> > + bitnum, MMA9553_DEFAULT_GPIO_POLARITY);
> > if (ret < 0)
> > return ret;
> > data->gpio_bitnum = bitnum;
> > @@ -392,19 +395,19 @@ static int mma9553_init(struct mma9553_data *data)
> > * a device identification command to differentiate the MMA9553L
> > * from the MMA9550L.
> > */
> > - ret =
> > - mma9551_read_config_words(data->client, MMA9551_APPID_PEDOMETER,
> > - MMA9553_REG_CONF_SLEEPMIN,
> > - sizeof(data->conf), (u16 *) &data->conf);
> > + ret = mma9551_read_config_words(data->client, MMA9551_APPID_PEDOMETER,
> > + MMA9553_REG_CONF_SLEEPMIN,
> > + sizeof(data->conf),
> > + (u16 *)&data->conf);
> > if (ret < 0) {
> > dev_err(&data->client->dev,
> > - "device is not MMA9553L: failed to read cfg regs\n");
> > + "failed to read configuration registers\n");
> > return ret;
> > }
> >
> >
> > - /* Reset gpio */
> > data->gpio_bitnum = -1;
> > + /* Reset GPIO */
> > ret = mma9553_conf_gpio(data);
> > if (ret < 0)
> > return ret;
> > @@ -417,18 +420,18 @@ static int mma9553_init(struct mma9553_data *data)
> > data->conf.sleepmin = MMA9553_DEFAULT_SLEEPMIN;
> > data->conf.sleepmax = MMA9553_DEFAULT_SLEEPMAX;
> > data->conf.sleepthd = MMA9553_DEFAULT_SLEEPTHD;
> > - data->conf.config =
> > - mma9553_set_bits(data->conf.config, 1, MMA9553_MASK_CONF_CONFIG);
> > + data->conf.config = mma9553_set_bits(data->conf.config, 1,
> > + MMA9553_MASK_CONF_CONFIG);
> > /*
> > * Clear the activity debounce counter when the activity level changes,
> > * so that the confidence level applies for any activity level.
> > */
> > data->conf.config = mma9553_set_bits(data->conf.config, 1,
> > MMA9553_MASK_CONF_ACT_DBCNTM);
> > - ret =
> > - mma9551_write_config_words(data->client, MMA9551_APPID_PEDOMETER,
> > - MMA9553_REG_CONF_SLEEPMIN,
> > - sizeof(data->conf), (u16 *) &data->conf);
> > + ret = mma9551_write_config_words(data->client, MMA9551_APPID_PEDOMETER,
> > + MMA9553_REG_CONF_SLEEPMIN,
> > + sizeof(data->conf),
> > + (u16 *)&data->conf);
> > if (ret < 0) {
> > dev_err(&data->client->dev,
> > "failed to write configuration registers\n");
> > @@ -791,7 +794,7 @@ static int mma9553_write_event_config(struct iio_dev
> > *indio_dev,
> >
> > mutex_unlock(&data->mutex);
> >
> > - return ret;
> > + return 0;
> >
> > err_conf_gpio:
> > if (state) {
> > @@ -896,7 +899,7 @@ static int mma9553_get_calibgender_mode(struct iio_dev
> > *indio_dev,
> > gender = mma9553_get_bits(data->conf.filter, MMA9553_MASK_CONF_MALE);
> > /*
> > * HW expects 0 for female and 1 for male,
> > - * while iio index is 0 for male and 1 for female
> > + * while iio index is 0 for male and 1 for female.
> > */
> > return !gender;
> > }
> > @@ -943,11 +946,11 @@ static const struct iio_event_spec
> > mma9553_activity_events[] = {
> > },
> > };
> >
> > -static const char * const calibgender_modes[] = { "male", "female" };
> > +static const char * const mma9553_calibgender_modes[] = { "male", "female"
> > };
> >
> > static const struct iio_enum mma9553_calibgender_enum = {
> > - .items = calibgender_modes,
> > - .num_items = ARRAY_SIZE(calibgender_modes),
> > + .items = mma9553_calibgender_modes,
> > + .num_items = ARRAY_SIZE(mma9553_calibgender_modes),
> > .get = mma9553_get_calibgender_mode,
> > .set = mma9553_set_calibgender_mode,
> > };
> > @@ -1054,16 +1057,15 @@ static irqreturn_t mma9553_event_handler(int irq,
> > void *private)
> > return IRQ_HANDLED;
> > }
> >
> > - ev_prev_activity =
> > - mma9553_get_event(data, IIO_ACTIVITY,
> > - mma9553_activity_to_mod(data->activity),
> > - IIO_EV_DIR_FALLING);
> > - ev_activity =
> > - mma9553_get_event(data, IIO_ACTIVITY,
> > - mma9553_activity_to_mod(activity),
> > - IIO_EV_DIR_RISING);
> > - ev_step_detect =
> > - mma9553_get_event(data, IIO_STEPS, IIO_NO_MOD, IIO_EV_DIR_NONE);
> > + ev_prev_activity = mma9553_get_event(data, IIO_ACTIVITY,
> > + mma9553_activity_to_mod(
> > + data->activity),
> > + IIO_EV_DIR_FALLING);
> > + ev_activity = mma9553_get_event(data, IIO_ACTIVITY,
> > + mma9553_activity_to_mod(activity),
> > + IIO_EV_DIR_RISING);
> > + ev_step_detect = mma9553_get_event(data, IIO_STEPS, IIO_NO_MOD,
> > + IIO_EV_DIR_NONE);
> >
> > if (ev_step_detect->enabled && (stepcnt != data->stepcnt)) {
> > data->stepcnt = stepcnt;
> > @@ -1108,16 +1110,16 @@ static int mma9553_gpio_probe(struct i2c_client
> > *client)
> >
> > dev = &client->dev;
> >
> > - /* data ready gpio interrupt pin */
> > + /* data ready GPIO interrupt pin */
> > gpio = devm_gpiod_get_index(dev, MMA9553_GPIO_NAME, 0, GPIOD_IN);
> > if (IS_ERR(gpio)) {
> > - dev_err(dev, "acpi gpio get index failed\n");
> > + dev_err(dev, "ACPI GPIO get index failed\n");
> > return PTR_ERR(gpio);
> > }
> >
> > ret = gpiod_to_irq(gpio);
> >
> > - dev_dbg(dev, "gpio resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
> > + dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
> >
> > return ret;
> > }
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
