Usage of labels instead of full paths reduces possible mistakes when overriding nodes.
Signed-off-by: Krzysztof Kozlowski <k.kozlowsk...@gmail.com> --- arch/arm/boot/dts/exynos5250.dtsi | 82 +++++++++++++++++++-------------------- 1 file changed, 41 insertions(+), 41 deletions(-) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 257e2f10525d..916871bb3f05 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -241,13 +241,6 @@ clock-names = "mfc"; }; - rtc: rtc@101E0000 { - clocks = <&clock CLK_RTC>; - clock-names = "rtc"; - interrupt-parent = <&pmu_system_controller>; - status = "disabled"; - }; - tmu: tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; @@ -276,26 +269,6 @@ }; }; - serial@12C00000 { - clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - }; - - serial@12C10000 { - clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; - clock-names = "uart", "clk_uart_baud0"; - }; - - serial@12C20000 { - clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - }; - - serial@12C30000 { - clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; - clock-names = "uart", "clk_uart_baud0"; - }; - sata: sata@122F0000 { compatible = "snps,dwc-ahci"; samsung,sata-freq = <66>; @@ -778,20 +751,6 @@ #phy-cells = <0>; }; - dp: dp-controller@145B0000 { - power-domains = <&pd_disp1>; - clocks = <&clock CLK_DP>; - clock-names = "dp"; - phys = <&dp_phy>; - phy-names = "dp"; - }; - - fimd: fimd@14400000 { - power-domains = <&pd_disp1>; - clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; - clock-names = "sclk_fimd", "fimd"; - }; - adc: adc@12D10000 { compatible = "samsung,exynos-adc-v1"; reg = <0x12D10000 0x100>; @@ -812,3 +771,44 @@ clock-names = "secss"; }; }; + +&dp { + power-domains = <&pd_disp1>; + clocks = <&clock CLK_DP>; + clock-names = "dp"; + phys = <&dp_phy>; + phy-names = "dp"; +}; + +&fimd { + power-domains = <&pd_disp1>; + clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; + clock-names = "sclk_fimd", "fimd"; +}; + +&rtc { + clocks = <&clock CLK_RTC>; + clock-names = "rtc"; + interrupt-parent = <&pmu_system_controller>; + status = "disabled"; +}; + +&serial_0 { + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_1 { + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_2 { + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_3 { + clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; +}; -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/