The only thing left in i2c-sensor.h are module parameter definition
macros. It's only an extension of what i2c.h offers, and this extension
is not sensors-specific. As a matter of fact, a few non-sensors drivers
use them. So we better merge them in i2c.h, and get rid of i2c-sensor.h
altogether.
Signed-off-by: Jean Delvare <[EMAIL PROTECTED]>
Documentation/i2c/porting-clients | 8 -
Documentation/i2c/writing-clients | 68 ++----------
drivers/hwmon/adm1021.c | 3
drivers/hwmon/adm1025.c | 3
drivers/hwmon/adm1026.c | 3
drivers/hwmon/adm1031.c | 3
drivers/hwmon/adm9240.c | 3
drivers/hwmon/asb100.c | 3
drivers/hwmon/atxp1.c | 3
drivers/hwmon/ds1621.c | 3
drivers/hwmon/fscher.c | 3
drivers/hwmon/fscpos.c | 3
drivers/hwmon/gl518sm.c | 3
drivers/hwmon/gl520sm.c | 3
drivers/hwmon/it87.c | 3
drivers/hwmon/lm63.c | 3
drivers/hwmon/lm75.c | 3
drivers/hwmon/lm77.c | 3
drivers/hwmon/lm78.c | 3
drivers/hwmon/lm80.c | 3
drivers/hwmon/lm83.c | 3
drivers/hwmon/lm85.c | 3
drivers/hwmon/lm87.c | 3
drivers/hwmon/lm90.c | 3
drivers/hwmon/lm92.c | 3
drivers/hwmon/max1619.c | 3
drivers/hwmon/sis5595.c | 1
drivers/hwmon/smsc47m1.c | 1
drivers/hwmon/via686a.c | 1
drivers/hwmon/w83627hf.c | 1
drivers/hwmon/w83781d.c | 3
drivers/hwmon/w83792d.c | 3
drivers/hwmon/w83l785ts.c | 3
drivers/i2c/chips/ds1337.c | 3
drivers/i2c/chips/eeprom.c | 3
drivers/i2c/chips/max6875.c | 3
drivers/i2c/chips/pca9539.c | 3
drivers/i2c/chips/pcf8574.c | 3
drivers/i2c/chips/pcf8591.c | 3
include/linux/i2c-sensor.h | 203 --------------------------------------
include/linux/i2c.h | 148 +++++++++++++++++++++++++--
41 files changed, 188 insertions(+), 342 deletions(-)
--- linux-2.6.13-rc4.orig/Documentation/i2c/porting-clients 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/Documentation/i2c/porting-clients 2005-07-31
20:55:54.000000000 +0200
@@ -1,4 +1,4 @@
-Revision 4, 2004-03-30
+Revision 5, 2005-07-29
Jean Delvare <[EMAIL PROTECTED]>
Greg KH <[EMAIL PROTECTED]>
@@ -17,13 +17,12 @@
Technical changes:
-* [Includes] Get rid of "version.h". Replace <linux/i2c-proc.h> with
- <linux/i2c-sensor.h>. Includes typically look like that:
+* [Includes] Get rid of "version.h" and <linux/i2c-proc.h>.
+ Includes typically look like that:
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
- #include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h> /* if you need VRM support */
#include <asm/io.h> /* if you have I/O operations */
Please respect this inclusion order. Some extra headers may be
@@ -31,6 +30,7 @@
* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, ISA addresses
are no more handled by the i2c core.
+ SENSORS_INSMOD_<n> becomes I2C_CLIENT_INSMOD_<n>.
* [Client data] Get rid of sysctl_id. Try using standard names for
register values (for example, temp_os becomes temp_max). You're
--- linux-2.6.13-rc4.orig/Documentation/i2c/writing-clients 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/Documentation/i2c/writing-clients 2005-07-31
20:55:54.000000000 +0200
@@ -155,8 +155,8 @@
-Probing classes (i2c)
----------------------
+Probing classes
+---------------
All parameters are given as lists of unsigned 16-bit integers. Lists are
terminated by I2C_CLIENT_END.
@@ -171,12 +171,18 @@
ignore: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the I2C address. These addresses are never probed.
- This parameter overrules 'normal' and 'probe', but not the 'force' lists.
+ This parameter overrules the 'normal_i2c' list only.
force: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the I2C address. A device is blindly assumed to be on
the given address, no probing is done.
+Additionally, kind-specific force lists may optionally be defined if
+the driver supports several chip kinds. They are grouped in a
+NULL-terminated list of pointers named forces, those first element if the
+generic force list mentioned above. Each additional list correspond to an
+insmod parameter of the form force_<kind>.
+
Fortunately, as a module writer, you just have to define the `normal_i2c'
parameter. The complete declaration could look like this:
@@ -186,61 +192,17 @@
/* Magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
+ /* Or, if your driver supports, say, 2 kind of devices: */
+ I2C_CLIENT_INSMOD_2(foo, bar);
+
+If you use the multi-kind form, an enum will be defined for you:
+ enum chips { any_chip, foo, bar, ... }
+You can then (and certainly should) use it in the driver code.
Note that you *have* to call the defined variable `normal_i2c',
without any prefix!
-Probing classes (sensors)
--------------------------
-
-If you write a `sensors' driver, you use a slightly different interface.
-Also, we use a enum of chip types. Don't forget to include `sensors.h'.
-
-The following lists are used internally. They are all lists of integers.
-
- normal_i2c: filled in by the module writer. Terminated by I2C_CLIENT_END.
- A list of I2C addresses which should normally be examined.
- probe: insmod parameter. Initialize this list with I2C_CLIENT_END values.
- A list of pairs. The first value is a bus number (ANY_I2C_BUS for any
- I2C bus), the second is the address. These addresses are also probed,
- as if they were in the 'normal' list.
- ignore: insmod parameter. Initialize this list with I2C_CLIENT_END values.
- A list of pairs. The first value is a bus number (ANY_I2C_BUS for any
- I2C bus), the second is the I2C address. These addresses are never
- probed. This parameter overrules 'normal' and 'probe', but not the
- 'force' lists.
-
-Also used is a list of pointers to sensors_force_data structures:
- force_data: insmod parameters. A list, ending with an element of which
- the force field is NULL.
- Each element contains the type of chip and a list of pairs.
- The first value is a bus number (ANY_I2C_BUS for any I2C bus), the
- second is the address.
- These are automatically translated to insmod variables of the form
- force_foo.
-
-So we have a generic insmod variabled `force', and chip-specific variables
-`force_CHIPNAME'.
-
-Fortunately, as a module writer, you just have to define the `normal_i2c'
-parameter, and define what chip names are used. The complete declaration
-could look like this:
- /* Scan i2c addresses 0x37, and 0x48 to 0x4f */
- static unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4b, 0x4c,
- 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
-
- /* Define chips foo and bar, as well as all module parameters and things */
- SENSORS_INSMOD_2(foo,bar);
-
-If you have one chip, you use macro SENSORS_INSMOD_1(chip), if you have 2
-you use macro SENSORS_INSMOD_2(chip1,chip2), etc. If you do not want to
-bother with chip types, you can use SENSORS_INSMOD_0.
-
-A enum is automatically defined as follows:
- enum chips { any_chip, chip1, chip2, ... }
-
-
Attaching to an adapter
-----------------------
--- linux-2.6.13-rc4.orig/drivers/hwmon/adm1021.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/adm1021.c 2005-07-31 20:55:54.000000000
+0200
@@ -24,7 +24,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -36,7 +35,7 @@
I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm,
mc1066);
+I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84,
gl523sm, mc1066);
/* adm1021 constants specified below */
--- linux-2.6.13-rc4.orig/drivers/hwmon/adm1025.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/adm1025.c 2005-07-31 20:55:54.000000000
+0200
@@ -50,7 +50,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -67,7 +66,7 @@
* Insmod parameters
*/
-SENSORS_INSMOD_2(adm1025, ne1619);
+I2C_CLIENT_INSMOD_2(adm1025, ne1619);
/*
* The ADM1025 registers
--- linux-2.6.13-rc4.orig/drivers/hwmon/adm1026.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/adm1026.c 2005-07-31 20:55:54.000000000
+0200
@@ -28,7 +28,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
@@ -38,7 +37,7 @@
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(adm1026);
+I2C_CLIENT_INSMOD_1(adm1026);
static int gpio_input[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1 };
--- linux-2.6.13-rc4.orig/drivers/hwmon/adm1031.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/adm1031.c 2005-07-31 20:55:54.000000000
+0200
@@ -26,7 +26,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -63,7 +62,7 @@
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_2(adm1030, adm1031);
+I2C_CLIENT_INSMOD_2(adm1030, adm1031);
typedef u8 auto_chan_table_t[8][2];
--- linux-2.6.13-rc4.orig/drivers/hwmon/adm9240.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/adm9240.c 2005-07-31 20:55:54.000000000
+0200
@@ -45,7 +45,6 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -55,7 +54,7 @@
I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_3(adm9240, ds1780, lm81);
+I2C_CLIENT_INSMOD_3(adm9240, ds1780, lm81);
/* ADM9240 registers */
#define ADM9240_REG_MAN_ID 0x3e
--- linux-2.6.13-rc4.orig/drivers/hwmon/asb100.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/asb100.c 2005-07-31 20:55:54.000000000
+0200
@@ -39,7 +39,6 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -57,7 +56,7 @@
static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(asb100);
+I2C_CLIENT_INSMOD_1(asb100);
I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
--- linux-2.6.13-rc4.orig/drivers/hwmon/atxp1.c 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/drivers/hwmon/atxp1.c 2005-07-31 20:55:54.000000000
+0200
@@ -23,7 +23,6 @@
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -43,7 +42,7 @@
static unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END };
-SENSORS_INSMOD_1(atxp1);
+I2C_CLIENT_INSMOD_1(atxp1);
static int atxp1_attach_adapter(struct i2c_adapter * adapter);
static int atxp1_detach_client(struct i2c_client * client);
--- linux-2.6.13-rc4.orig/drivers/hwmon/ds1621.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/ds1621.c 2005-07-31 20:55:54.000000000
+0200
@@ -26,7 +26,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include "lm75.h"
@@ -36,7 +35,7 @@
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(ds1621);
+I2C_CLIENT_INSMOD_1(ds1621);
static int polarity = -1;
module_param(polarity, int, 0);
MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active
low");
--- linux-2.6.13-rc4.orig/drivers/hwmon/fscher.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/fscher.c 2005-07-31 20:55:54.000000000
+0200
@@ -31,7 +31,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -45,7 +44,7 @@
* Insmod parameters
*/
-SENSORS_INSMOD_1(fscher);
+I2C_CLIENT_INSMOD_1(fscher);
/*
* The FSCHER registers
--- linux-2.6.13-rc4.orig/drivers/hwmon/fscpos.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/fscpos.c 2005-07-31 20:55:54.000000000
+0200
@@ -34,7 +34,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/init.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -47,7 +46,7 @@
/*
* Insmod parameters
*/
-SENSORS_INSMOD_1(fscpos);
+I2C_CLIENT_INSMOD_1(fscpos);
/*
* The FSCPOS registers
--- linux-2.6.13-rc4.orig/drivers/hwmon/gl518sm.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/gl518sm.c 2005-07-31 20:55:54.000000000
+0200
@@ -41,7 +41,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -49,7 +48,7 @@
static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_2(gl518sm_r00, gl518sm_r80);
+I2C_CLIENT_INSMOD_2(gl518sm_r00, gl518sm_r80);
/* Many GL518 constants specified below */
--- linux-2.6.13-rc4.orig/drivers/hwmon/gl520sm.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/gl520sm.c 2005-07-31 20:55:54.000000000
+0200
@@ -26,7 +26,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -40,7 +39,7 @@
static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(gl520sm);
+I2C_CLIENT_INSMOD_1(gl520sm);
/* Many GL520 constants specified below
One of the inputs can be configured as either temp or voltage.
--- linux-2.6.13-rc4.orig/drivers/hwmon/it87.c 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/drivers/hwmon/it87.c 2005-07-31 20:55:54.000000000
+0200
@@ -37,7 +37,6 @@
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-isa.h>
-#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
@@ -51,7 +50,7 @@
static unsigned short isa_address = 0x290;
/* Insmod parameters */
-SENSORS_INSMOD_2(it87, it8712);
+I2C_CLIENT_INSMOD_2(it87, it8712);
#define REG 0x2e /* The register to read/write */
#define DEV 0x07 /* Register: Logical device select */
--- linux-2.6.13-rc4.orig/drivers/hwmon/lm63.c 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/drivers/hwmon/lm63.c 2005-07-31 20:55:54.000000000
+0200
@@ -42,7 +42,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -58,7 +57,7 @@
* Insmod parameters
*/
-SENSORS_INSMOD_1(lm63);
+I2C_CLIENT_INSMOD_1(lm63);
/*
* The LM63 registers
--- linux-2.6.13-rc4.orig/drivers/hwmon/lm75.c 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/drivers/hwmon/lm75.c 2005-07-31 20:55:54.000000000
+0200
@@ -23,7 +23,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include "lm75.h"
@@ -34,7 +33,7 @@
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(lm75);
+I2C_CLIENT_INSMOD_1(lm75);
/* Many LM75 constants specified below */
--- linux-2.6.13-rc4.orig/drivers/hwmon/lm77.c 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/drivers/hwmon/lm77.c 2005-07-31 20:55:54.000000000
+0200
@@ -30,7 +30,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -38,7 +37,7 @@
static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END
};
/* Insmod parameters */
-SENSORS_INSMOD_1(lm77);
+I2C_CLIENT_INSMOD_1(lm77);
/* The LM77 registers */
#define LM77_REG_TEMP 0x00
--- linux-2.6.13-rc4.orig/drivers/hwmon/lm78.c 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/drivers/hwmon/lm78.c 2005-07-31 20:55:54.000000000
+0200
@@ -24,7 +24,6 @@
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-isa.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include <asm/io.h>
@@ -37,7 +36,7 @@
static unsigned short isa_address = 0x290;
/* Insmod parameters */
-SENSORS_INSMOD_2(lm78, lm79);
+I2C_CLIENT_INSMOD_2(lm78, lm79);
/* Many LM78 constants specified below */
--- linux-2.6.13-rc4.orig/drivers/hwmon/lm80.c 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/drivers/hwmon/lm80.c 2005-07-31 20:55:54.000000000
+0200
@@ -26,7 +26,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -35,7 +34,7 @@
0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(lm80);
+I2C_CLIENT_INSMOD_1(lm80);
/* Many LM80 constants specified below */
--- linux-2.6.13-rc4.orig/drivers/hwmon/lm83.c 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/drivers/hwmon/lm83.c 2005-07-31 20:55:54.000000000
+0200
@@ -32,7 +32,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -52,7 +51,7 @@
* Insmod parameters
*/
-SENSORS_INSMOD_1(lm83);
+I2C_CLIENT_INSMOD_1(lm83);
/*
* The LM83 registers
--- linux-2.6.13-rc4.orig/drivers/hwmon/lm85.c 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/drivers/hwmon/lm85.c 2005-07-31 20:55:54.000000000
+0200
@@ -28,7 +28,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -37,7 +36,7 @@
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
+I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
/* The LM85 registers */
--- linux-2.6.13-rc4.orig/drivers/hwmon/lm87.c 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/drivers/hwmon/lm87.c 2005-07-31 20:55:54.000000000
+0200
@@ -57,7 +57,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -73,7 +72,7 @@
* Insmod parameters
*/
-SENSORS_INSMOD_1(lm87);
+I2C_CLIENT_INSMOD_1(lm87);
/*
* The LM87 registers
--- linux-2.6.13-rc4.orig/drivers/hwmon/lm90.c 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/drivers/hwmon/lm90.c 2005-07-31 20:55:54.000000000
+0200
@@ -75,7 +75,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -96,7 +95,7 @@
* Insmod parameters
*/
-SENSORS_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461);
+I2C_CLIENT_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461);
/*
* The LM90 registers
--- linux-2.6.13-rc4.orig/drivers/hwmon/lm92.c 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/drivers/hwmon/lm92.c 2005-07-31 20:55:54.000000000
+0200
@@ -44,7 +44,6 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -54,7 +53,7 @@
I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(lm92);
+I2C_CLIENT_INSMOD_1(lm92);
/* The LM92 registers */
#define LM92_REG_CONFIG 0x01 /* 8-bit, RW */
--- linux-2.6.13-rc4.orig/drivers/hwmon/max1619.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/max1619.c 2005-07-31 20:55:54.000000000
+0200
@@ -31,7 +31,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -44,7 +43,7 @@
* Insmod parameters
*/
-SENSORS_INSMOD_1(max1619);
+I2C_CLIENT_INSMOD_1(max1619);
/*
* The MAX1619 registers
--- linux-2.6.13-rc4.orig/drivers/hwmon/sis5595.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/sis5595.c 2005-07-31 20:55:54.000000000
+0200
@@ -56,7 +56,6 @@
#include <linux/pci.h>
#include <linux/i2c.h>
#include <linux/i2c-isa.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/init.h>
--- linux-2.6.13-rc4.orig/drivers/hwmon/smsc47m1.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/smsc47m1.c 2005-07-31 20:55:54.000000000
+0200
@@ -31,7 +31,6 @@
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-isa.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/init.h>
--- linux-2.6.13-rc4.orig/drivers/hwmon/via686a.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/via686a.c 2005-07-31 20:55:54.000000000
+0200
@@ -36,7 +36,6 @@
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-isa.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/init.h>
--- linux-2.6.13-rc4.orig/drivers/hwmon/w83627hf.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/w83627hf.c 2005-07-31 20:55:54.000000000
+0200
@@ -43,7 +43,6 @@
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-isa.h>
-#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
#include <linux/hwmon.h>
#include <linux/err.h>
--- linux-2.6.13-rc4.orig/drivers/hwmon/w83781d.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/w83781d.c 2005-07-31 20:55:54.000000000
+0200
@@ -39,7 +39,6 @@
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-isa.h>
-#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -53,7 +52,7 @@
static unsigned short isa_address = 0x290;
/* Insmod parameters */
-SENSORS_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f);
+I2C_CLIENT_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f);
I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
--- linux-2.6.13-rc4.orig/drivers/hwmon/w83792d.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/w83792d.c 2005-07-31 20:55:54.000000000
+0200
@@ -40,7 +40,6 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
@@ -50,7 +49,7 @@
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END
};
/* Insmod parameters */
-SENSORS_INSMOD_1(w83792d);
+I2C_CLIENT_INSMOD_1(w83792d);
I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
--- linux-2.6.13-rc4.orig/drivers/hwmon/w83l785ts.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/hwmon/w83l785ts.c 2005-07-31 20:55:54.000000000
+0200
@@ -36,7 +36,6 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
@@ -54,7 +53,7 @@
* Insmod parameters
*/
-SENSORS_INSMOD_1(w83l785ts);
+I2C_CLIENT_INSMOD_1(w83l785ts);
/*
* The W83L785TS-S registers
--- linux-2.6.13-rc4.orig/drivers/i2c/chips/ds1337.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/i2c/chips/ds1337.c 2005-07-31 20:55:54.000000000
+0200
@@ -17,7 +17,6 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/string.h>
#include <linux/rtc.h> /* get the user-level API */
#include <linux/bcd.h>
@@ -40,7 +39,7 @@
*/
static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END };
-SENSORS_INSMOD_1(ds1337);
+I2C_CLIENT_INSMOD_1(ds1337);
static int ds1337_attach_adapter(struct i2c_adapter *adapter);
static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind);
--- linux-2.6.13-rc4.orig/drivers/i2c/chips/eeprom.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/i2c/chips/eeprom.c 2005-07-31 20:55:54.000000000
+0200
@@ -33,14 +33,13 @@
#include <linux/sched.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
0x55, 0x56, 0x57, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(eeprom);
+I2C_CLIENT_INSMOD_1(eeprom);
/* Size of EEPROM in bytes */
--- linux-2.6.13-rc4.orig/drivers/i2c/chips/max6875.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/i2c/chips/max6875.c 2005-07-31
20:55:54.000000000 +0200
@@ -31,14 +31,13 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <asm/semaphore.h>
/* Do not scan - the MAX6875 access method will write to some EEPROM chips */
static unsigned short normal_i2c[] = {I2C_CLIENT_END};
/* Insmod parameters */
-SENSORS_INSMOD_1(max6875);
+I2C_CLIENT_INSMOD_1(max6875);
/* The MAX6875 can only read/write 16 bytes at a time */
#define SLICE_SIZE 16
--- linux-2.6.13-rc4.orig/drivers/i2c/chips/pca9539.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/i2c/chips/pca9539.c 2005-07-31
20:55:54.000000000 +0200
@@ -13,13 +13,12 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon-sysfs.h>
-#include <linux/i2c-sensor.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = {0x74, 0x75, 0x76, 0x77, I2C_CLIENT_END};
/* Insmod parameters */
-SENSORS_INSMOD_1(pca9539);
+I2C_CLIENT_INSMOD_1(pca9539);
enum pca9539_cmd
{
--- linux-2.6.13-rc4.orig/drivers/i2c/chips/pcf8574.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/i2c/chips/pcf8574.c 2005-07-31
20:55:54.000000000 +0200
@@ -39,7 +39,6 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
0x26, 0x27,
@@ -47,7 +46,7 @@
I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_2(pcf8574, pcf8574a);
+I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a);
/* Initial values */
#define PCF8574_INIT 255 /* All outputs on (input mode) */
--- linux-2.6.13-rc4.orig/drivers/i2c/chips/pcf8591.c 2005-07-31
16:50:47.000000000 +0200
+++ linux-2.6.13-rc4/drivers/i2c/chips/pcf8591.c 2005-07-31
20:55:54.000000000 +0200
@@ -24,14 +24,13 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(pcf8591);
+I2C_CLIENT_INSMOD_1(pcf8591);
static int input_mode;
module_param(input_mode, int, 0);
--- linux-2.6.13-rc4.orig/include/linux/i2c-sensor.h 2005-07-31
16:50:47.000000000 +0200
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,203 +0,0 @@
-/*
- i2c-sensor.h - Part of the i2c package
- was originally sensors.h - Part of lm_sensors, Linux kernel modules
- for hardware monitoring
- Copyright (c) 1998, 1999 Frodo Looijaard <[EMAIL PROTECTED]>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef _LINUX_I2C_SENSOR_H
-#define _LINUX_I2C_SENSOR_H
-
-#include <linux/i2c.h>
-
-#define SENSORS_MODULE_PARM_FORCE(name) \
- I2C_CLIENT_MODULE_PARM(force_ ## name, \
- "List of adapter,address pairs which are unquestionably"
\
- " assumed to contain a `" # name "' chip")
-
-
-/* This defines several insmod variables, and the addr_data structure */
-#define SENSORS_INSMOD \
- I2C_CLIENT_MODULE_PARM(probe, \
- "List of adapter,address pairs to scan additionally"); \
- I2C_CLIENT_MODULE_PARM(ignore, \
- "List of adapter,address pairs not to scan"); \
- static struct i2c_client_address_data addr_data = { \
- .normal_i2c = normal_i2c, \
- .probe = probe, \
- .ignore = ignore, \
- .forces = forces, \
- }
-
-/* The following functions create an enum with the chip names as elements.
- The first element of the enum is any_chip. These are the only macros
- a module will want to use. */
-
-#define SENSORS_INSMOD_0 \
- enum chips { any_chip }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- static unsigned short *forces[] = { force, \
- NULL }; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_1(chip1) \
- enum chips { any_chip, chip1 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- static unsigned short *forces[] = { force, \
- force_##chip1, \
- NULL }; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_2(chip1,chip2) \
- enum chips { any_chip, chip1, chip2 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- static unsigned short *forces[] = { force, \
- force_##chip1, \
- force_##chip2, \
- NULL }; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_3(chip1,chip2,chip3) \
- enum chips { any_chip, chip1, chip2, chip3 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- static unsigned short *forces[] = { force, \
- force_##chip1, \
- force_##chip2, \
- force_##chip3, \
- NULL }; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_4(chip1,chip2,chip3,chip4) \
- enum chips { any_chip, chip1, chip2, chip3, chip4 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- static unsigned short *forces[] = { force, \
- force_##chip1, \
- force_##chip2, \
- force_##chip3, \
- force_##chip4, \
- NULL}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_5(chip1,chip2,chip3,chip4,chip5) \
- enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- SENSORS_MODULE_PARM_FORCE(chip5); \
- static unsigned short *forces[] = { force, \
- force_##chip1, \
- force_##chip2, \
- force_##chip3, \
- force_##chip4, \
- force_##chip5, \
- NULL }; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_6(chip1,chip2,chip3,chip4,chip5,chip6) \
- enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- SENSORS_MODULE_PARM_FORCE(chip5); \
- SENSORS_MODULE_PARM_FORCE(chip6); \
- static unsigned short *forces[] = { force, \
- force_##chip1, \
- force_##chip2, \
- force_##chip3, \
- force_##chip4, \
- force_##chip5, \
- force_##chip6, \
- NULL }; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_7(chip1,chip2,chip3,chip4,chip5,chip6,chip7) \
- enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- SENSORS_MODULE_PARM_FORCE(chip5); \
- SENSORS_MODULE_PARM_FORCE(chip6); \
- SENSORS_MODULE_PARM_FORCE(chip7); \
- static unsigned short *forces[] = { force, \
- force_##chip1, \
- force_##chip2, \
- force_##chip3, \
- force_##chip4, \
- force_##chip5, \
- force_##chip6, \
- force_##chip7, \
- NULL }; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_8(chip1,chip2,chip3,chip4,chip5,chip6,chip7,chip8) \
- enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7,
chip8 }; \
- I2C_CLIENT_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- SENSORS_MODULE_PARM_FORCE(chip5); \
- SENSORS_MODULE_PARM_FORCE(chip6); \
- SENSORS_MODULE_PARM_FORCE(chip7); \
- SENSORS_MODULE_PARM_FORCE(chip8); \
- static unsigned short *forces[] = { force, \
- force_##chip1, \
- force_##chip2, \
- force_##chip3, \
- force_##chip4, \
- force_##chip5, \
- force_##chip6, \
- force_##chip7, \
- force_##chip8, \
- NULL }; \
- SENSORS_INSMOD
-
-#endif /* def _LINUX_I2C_SENSOR_H */
--- linux-2.6.13-rc4.orig/include/linux/i2c.h 2005-07-31 16:50:47.000000000
+0200
+++ linux-2.6.13-rc4/include/linux/i2c.h 2005-07-31 20:55:54.000000000
+0200
@@ -565,24 +565,148 @@
module_param_array(var, short, &var##_num, 0); \
MODULE_PARM_DESC(var,desc)
-/* This is the one you want to use in your own modules */
+#define I2C_CLIENT_MODULE_PARM_FORCE(name) \
+I2C_CLIENT_MODULE_PARM(force_##name, \
+ "List of adapter,address pairs which are " \
+ "unquestionably assumed to contain a `" \
+ # name "' chip")
+
+
+#define I2C_CLIENT_INSMOD_COMMON \
+I2C_CLIENT_MODULE_PARM(probe, "List of adapter,address pairs to scan " \
+ "additionally"); \
+I2C_CLIENT_MODULE_PARM(ignore, "List of adapter,address pairs not to " \
+ "scan"); \
+static struct i2c_client_address_data addr_data = { \
+ .normal_i2c = normal_i2c, \
+ .probe = probe, \
+ .ignore = ignore, \
+ .forces = forces, \
+}
+
+/* These are the ones you want to use in your own drivers. Pick the one
+ which matches the number of devices the driver differenciates between. */
#define I2C_CLIENT_INSMOD \
- I2C_CLIENT_MODULE_PARM(probe, \
- "List of adapter,address pairs to scan additionally"); \
- I2C_CLIENT_MODULE_PARM(ignore, \
- "List of adapter,address pairs not to scan"); \
I2C_CLIENT_MODULE_PARM(force, \
"List of adapter,address pairs to boldly assume " \
"to be present"); \
- static unsigned short *addr_forces[] = { \
+ static unsigned short *forces[] = { \
force, \
NULL \
}; \
- static struct i2c_client_address_data addr_data = { \
- .normal_i2c = normal_i2c, \
- .probe = probe, \
- .ignore = ignore, \
- .forces = addr_forces, \
- }
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_1(chip1) \
+enum chips { any_chip, chip1 };
\
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+static unsigned short *forces[] = { force, force_##chip1, NULL }; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_2(chip1, chip2) \
+enum chips { any_chip, chip1, chip2 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, NULL }; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_3(chip1, chip2, chip3) \
+enum chips { any_chip, chip1, chip2, chip3 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, force_##chip3, \
+ NULL }; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_4(chip1, chip2, chip3, chip4)
\
+enum chips { any_chip, chip1, chip2, chip3, chip4 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, force_##chip3, \
+ force_##chip4, NULL}; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_5(chip1, chip2, chip3, chip4, chip5) \
+enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, force_##chip3, \
+ force_##chip4, force_##chip5, \
+ NULL }; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_6(chip1, chip2, chip3, chip4, chip5, chip6) \
+enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip6); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, force_##chip3, \
+ force_##chip4, force_##chip5, \
+ force_##chip6, NULL }; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_7(chip1, chip2, chip3, chip4, chip5, chip6, chip7) \
+enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \
+ chip7 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip6); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip7); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, force_##chip3, \
+ force_##chip4, force_##chip5, \
+ force_##chip6, force_##chip7, \
+ NULL }; \
+I2C_CLIENT_INSMOD_COMMON
+
+#define I2C_CLIENT_INSMOD_8(chip1, chip2, chip3, chip4, chip5, chip6, chip7,
chip8) \
+enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \
+ chip7, chip8 }; \
+I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \
+ "boldly assume to be present"); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip1); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip2); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip3); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip4); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip5); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip6); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip7); \
+I2C_CLIENT_MODULE_PARM_FORCE(chip8); \
+static unsigned short *forces[] = { force, force_##chip1, \
+ force_##chip2, force_##chip3, \
+ force_##chip4, force_##chip5, \
+ force_##chip6, force_##chip7, \
+ force_##chip8, NULL }; \
+I2C_CLIENT_INSMOD_COMMON
#endif /* _LINUX_I2C_H */
--
Jean Delvare
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
