Focaltech touchpads report finger width in packet[5] of absolute packet.
Range for width in raw format is 0x10 - 0x70. Second half-byte is always 0.
0xff is reported, when a large contact area is detected.
This can be handled in userspace.

Signed-off-by: Dmitry Tunin <hanipouspi...@gmail.com>
---
 drivers/input/mouse/focaltech.c | 53 +++++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 21 deletions(-)

diff --git a/drivers/input/mouse/focaltech.c b/drivers/input/mouse/focaltech.c
index 23d2594..1ef9d2b 100644
--- a/drivers/input/mouse/focaltech.c
+++ b/drivers/input/mouse/focaltech.c
@@ -55,8 +55,6 @@ static void focaltech_reset(struct psmouse *psmouse)
        psmouse_reset(psmouse);
 }
 
-#ifdef CONFIG_MOUSE_PS2_FOCALTECH
-
 /*
  * Packet types - the numbers are not consecutive, so we might be missing
  * something here.
@@ -105,6 +103,16 @@ struct focaltech_hw_state {
 
        /* True if the clickpad has been pressed. */
        bool pressed;
+
+       /*
+       * Finger width 0-7 and 15 for 'latching'
+       * 15 value stays until the finger is released
+       * Width is reported only when 1 finger is active
+       */
+       unsigned int width;
+
+       /* Finger count */
+       unsigned int count;
 };
 
 struct focaltech_data {
@@ -118,7 +126,7 @@ static void focaltech_report_state(struct psmouse *psmouse)
        struct focaltech_hw_state *state = &priv->state;
        struct input_dev *dev = psmouse->dev;
        int i;
-
+       
        for (i = 0; i < FOC_MAX_FINGERS; i++) {
                struct focaltech_finger_state *finger = &state->fingers[i];
                bool active = finger->active && finger->valid;
@@ -126,21 +134,23 @@ static void focaltech_report_state(struct psmouse 
*psmouse)
                input_mt_slot(dev, i);
                input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
                if (active) {
-                       unsigned int clamped_x, clamped_y;
+                       int clamped_x, clamped_y;
                        /*
                         * The touchpad might report invalid data, so we clamp
                         * the resulting values so that we do not confuse
                         * userspace.
                         */
-                       clamped_x = clamp(finger->x, 0U, priv->x_max);
-                       clamped_y = clamp(finger->y, 0U, priv->y_max);
+                       clamped_x = clamp((int)finger->x, 0, (int)priv->x_max);
+                       clamped_y = clamp((int)finger->y, 0, (int)priv->y_max);
                        input_report_abs(dev, ABS_MT_POSITION_X, clamped_x);
                        input_report_abs(dev, ABS_MT_POSITION_Y,
                                         priv->y_max - clamped_y);
+                       if (state->count == 1)
+                               input_report_abs(dev, ABS_TOOL_WIDTH, 
state->width);
                }
        }
-       input_mt_report_pointer_emulation(dev, true);
-
+       input_mt_report_finger_count(dev, state->count);
+       input_mt_report_pointer_emulation(dev, false);
        input_report_key(psmouse->dev, BTN_LEFT, state->pressed);
        input_sync(psmouse->dev);
 }
@@ -152,13 +162,17 @@ static void focaltech_process_touch_packet(struct psmouse 
*psmouse,
        struct focaltech_hw_state *state = &priv->state;
        unsigned char fingers = packet[1];
        int i;
+       int count = 0;
 
        state->pressed = (packet[0] >> 4) & 1;
 
        /* the second byte contains a bitmap of all fingers touching the pad */
        for (i = 0; i < FOC_MAX_FINGERS; i++) {
-               state->fingers[i].active = fingers & 0x1;
-               if (!state->fingers[i].active) {
+
+               if (fingers & 0x1) {
+                       state->fingers[i].active = true;
+                       count++;
+               } else {
                        /*
                         * Even when the finger becomes active again, we still
                         * will have to wait for the first valid position.
@@ -167,6 +181,8 @@ static void focaltech_process_touch_packet(struct psmouse 
*psmouse,
                }
                fingers >>= 1;
        }
+       state->width = packet[5] >> 4;
+       state->count = count;
 }
 
 static void focaltech_process_abs_packet(struct psmouse *psmouse,
@@ -187,6 +203,7 @@ static void focaltech_process_abs_packet(struct psmouse 
*psmouse,
 
        state->fingers[finger].x = ((packet[1] & 0xf) << 8) | packet[2];
        state->fingers[finger].y = (packet[3] << 8) | packet[4];
+       state->width = packet[5] >> 4;
        state->fingers[finger].valid = true;
 }
 
@@ -331,6 +348,7 @@ static void focaltech_set_input_params(struct psmouse 
*psmouse)
        __set_bit(EV_ABS, dev->evbit);
        input_set_abs_params(dev, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
        input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
+       input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
        input_mt_init_slots(dev, 5, INPUT_MT_POINTER);
        __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
 }
@@ -428,9 +446,8 @@ int focaltech_init(struct psmouse *psmouse)
        /* resync is not supported yet */
        psmouse->resync_time = 0;
        /*
-        * rate/resolution/scale changes are not supported yet, and
-        * the generic implementations of these functions seem to
-        * confuse some touchpads
+        * rate/resolution/scale changes are not supported yet, and the generic
+        * implementations of these functions seem to confuse some touchpads
         */
        psmouse->set_resolution = focaltech_set_resolution;
        psmouse->set_rate = focaltech_set_rate;
@@ -444,13 +461,7 @@ fail:
        return error;
 }
 
-#else /* CONFIG_MOUSE_PS2_FOCALTECH */
-
-int focaltech_init(struct psmouse *psmouse)
+bool focaltech_supported(void)
 {
-       focaltech_reset(psmouse);
-
-       return 0;
+       return true;
 }
-
-#endif /* CONFIG_MOUSE_PS2_FOCALTECH */
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to