While you're discussing more substantial questions with Brian, I found
some nits.

On Wed, 2015-04-29 at 14:28 -0500, Ben Shelton wrote:
> --- a/drivers/mtd/Kconfig
> +++ b/drivers/mtd/Kconfig


> +config MTD_RESERVE_END
> +     int "Reserved space at the end of an all remaining space partition"
> +     depends on MTD_CMDLINE_PARTS = "y"

(The quotes are unneeded.)

MTD_CMDLINE_PARTS is tristate. Why does it need to be built-in for this
symbol?

> +     default 0
> +     ---help---
> +       Specify an amount of reserved space at the end of the last MTD
> +       partition when the size is specified with '-' to denote all
> +       remaining space.
> +
> +       This can be useful if, for example, the BBT is stored at the end
> +       of the flash, and you don't want those blocks counted as part of
> +       the last MTD partition. This is less heavyweight than reserving
> +       the BBT blocks with a separate MTD partition. The BBT marks its
> +       own blocks as bad blocks, which prevents an MTD driver such as
> +       UBI from getting an accurate count of the actual bad blocks in
> +       the MTD partition that contains the BBT.
> +
> +       The value is specified in bytes. As an example, a typical BBT
> +       reserves four erase blocks, and a typical erase block size is
> +       128kB. To reserve that much space at the end of the flash, the
> +       value for this config option would be 524288.
> +
> +       If unsure, use the default value of zero.

> --- a/drivers/mtd/cmdlinepart.c
> +++ b/drivers/mtd/cmdlinepart.c
> @@ -340,7 +340,8 @@ static int parse_cmdline_partitions(struct mtd_info 
> *master,
>                       offset = part->parts[i].offset;
>  
>               if (part->parts[i].size == SIZE_REMAINING)
> -                     part->parts[i].size = master->size - offset;
> +                     part->parts[i].size = master->size - offset -
> +                                           CONFIG_MTD_RESERVE_END;

I haven't tested this. (Quite often that means: I'm wrong.) But if
MTD_CMDLINE_PARTS is set to "m" I think MTD_RESERVE_END will not be set.
In that case CPP will helpfully set CONFIG_MTD_RESERVE_END to zero
(which is what you want). But it should also trigger this warning:
    "CONFIG_MTD_RESERVE_END" is not defined [-Wundef]

>  
>               if (offset + part->parts[i].size > master->size) {
>                       printk(KERN_WARNING ERRP


Paul Bolle

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to