This adds a i2c-mux-pinctrl node to dove.dtsi for the internal i2c mux found on Dove SoCs. Up to now, we had no board using any of the two additional i2c busses, so make sure the change does not break any existing boards.
Therefore, we rename the i2c-controller node label to "i2c" and enable it by default. Also, the dedicated sub-bus (now "i2c0") is enabled by default. The two optional sub-busses require additional external pin-muxing, so disable them by default. Signed-off-by: Sebastian Hesselbarth <[email protected]> Acked-by: Gregory CLEMENT <[email protected]> --- Cc: Jason Cooper <[email protected]> Cc: Andrew Lunn <[email protected]> Cc: Gregory Clement <[email protected]> Cc: Gabriel Dobato <[email protected]> Cc: [email protected] Cc: [email protected] --- arch/arm/boot/dts/dove.dtsi | 40 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 38 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 9ad829523a13..38b1f7e6004e 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -33,6 +33,42 @@ marvell,tauros2-cache-features = <0>; }; + i2c-mux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&i2c>; + + pinctrl-names = "i2c0", "i2c1", "i2c2"; + pinctrl-0 = <&pmx_i2cmux_0>; + pinctrl-1 = <&pmx_i2cmux_1>; + pinctrl-2 = <&pmx_i2cmux_2>; + + i2c0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; + + i2c1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + /* Requires pmx_i2c1 on i2c controller node */ + status = "disabled"; + }; + + i2c2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + /* Requires pmx_i2c2 on i2c controller node */ + status = "disabled"; + }; + }; + mbus { compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus"; #address-cells = <2>; @@ -123,7 +159,7 @@ status = "disabled"; }; - i2c0: i2c-ctrl@11000 { + i2c: i2c-ctrl@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; @@ -132,7 +168,7 @@ clock-frequency = <400000>; timeout-ms = <1000>; clocks = <&core_clk 0>; - status = "disabled"; + status = "okay"; }; uart0: serial@12000 { -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
