Hi Ingi,
On 05/08/2015 05:03 AM, Ingi Kim wrote:
This patch adds the device tree bindings for ktd2692 flash LEDs.
Add Optional properties of child node for Flash LED
Signed-off-by: Ingi Kim <ingi2....@samsung.com>
Acked-by: Seung-Woo Kim <sw0312....@samsung.com>
Reviewed-by: Varka Bhadram <varkabhad...@gmail.com>
---
.../devicetree/bindings/leds/leds-ktd2692.txt | 50 ++++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
new file mode 100644
index 0000000..cf45492
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
@@ -0,0 +1,50 @@
+* Kinetic Technologies - KTD2692 Flash LED Driver
+
+KTD2692 is the ideal power solution for high-power flash LEDs.
+It uses ExpressWire single-wire programming for maximum flexibility.
+
+The ExpressWire interface through CTRL pin can control LED on/off and
+enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+Flash timeout, LVP(low voltage protection).
+
+Also, When the AUX pin is pulled high while CTRL pin is high,
+LED current will be ramped up to the flash-mode current level.
+
+Required properties:
+- compatible: "kinetic,ktd2692"
How about:
compatible : Should be "kinetic,ktd2692".
Pleas put space between the property name and a colon consequently.
+- ctrl-gpio : gpio pin in order control CTRL pin
+- aux-gpio : gpio pin in order control AUX pin
Documentation/devicetree/bindings/gpio/gpio.txt states:
"GPIO properties should be named "[<name>-]gpios".
Please adhere to this. Also please begin description after colon
with a capital letter and put a dot at the end of sentence, e.g.:
ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
aux-gpio : Specifier of the GPIO connected to AUX pin.
+Optional properties:
+- vin-supply : "vin" LED supply (2.7V to 5.5V)
+ See Documentation/devicetree/bindings/regulator/regulator.txt
+
+A discrete LED element connected to the device must be represented by a child
+node - see Documentation/devicetree/bindings/leds/common.txt.
+
+Required properties for flash LED child nodes:
+ See Documentation/devicetree/bindings/leds/common.txt
+- led-max-microamp : Minimum Threshold for Timer protection
+ is defined internally (Maximum 300mA)
+- flash-max-microamp : Flash LED maximum current
+ Formula : I(mA) = 15000 / Rset
+- flash-max-timeout-us : Flash LED maximum timeout
+
+Optional properties for flash LED child nodes:
+- label : see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+ktd2692 {
+ compatible = "kinetic,ktd2692";
+ ctrl-gpio = <&gpc0 1 0>;
+ aux-gpio = <&gpc0 2 0>;
ctrl-gpios = <&gpc0 1 0>;
aux-gpios = <&gpc0 2 0>;
+ vin-supply = <&vbat>;
+
+ flash-led {
+ label = "ktd2692-flash";
+ led-max-microamp = <300000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1835000>;
+ };
+};
--
Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/