From: Dietmar Eggemann <dietmar.eggem...@arm.com>
Reuses the existing infrastructure for cpu_scale to provide the scheduler
with a cpu scaling correction factor for more accurate load-tracking.
This factor comprises a micro-architectural part, which is based on the
cpu efficiency value of a cpu as well as a platform-wide max frequency
part, which relates to the dtb property clock-frequency of a cpu node.
The calculation of cpu_scale, return value of arch_scale_cpu_capacity,
changes from
capacity / middle_capacity
with capacity = (clock_frequency >> 20) * cpu_efficiency
to
SCHED_CAPACITY_SCALE * cpu_perf / max_cpu_perf
The range of the cpu_scale value changes from
[0..3*SCHED_CAPACITY_SCALE/2] to [0..SCHED_CAPACITY_SCALE].
The functionality to calculate the middle_capacity which corresponds to an
'average' cpu has been taken out since the scaling is now done
differently.
In the case that either the cpu efficiency or the clock-frequency value
for a cpu is missing, no cpu scaling is done for any cpu.
The platform-wide max frequency part of the factor should not be confused
with the frequency invariant scheduler load-tracking support which deals
with frequency related scaling due to DFVS functionality on a cpu.
Cc: Russell King <li...@arm.linux.org.uk>
Signed-off-by: Dietmar Eggemann <dietmar.eggem...@arm.com>
---
arch/arm/kernel/topology.c | 64 +++++++++++++++++-----------------------------
1 file changed, 23 insertions(+), 41 deletions(-)
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index bad267c..5867587 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -62,9 +62,7 @@ struct cpu_efficiency {
* Table of relative efficiency of each processors
* The efficiency value must fit in 20bit and the final
* cpu_scale value must be in the range
- * 0 < cpu_scale < 3*SCHED_CAPACITY_SCALE/2
- * in order to return at most 1 when DIV_ROUND_CLOSEST
- * is used to compute the capacity of a CPU.
+ * 0 < cpu_scale < SCHED_CAPACITY_SCALE.
* Processors that are not defined in the table,
* use the default SCHED_CAPACITY_SCALE value for cpu_scale.
*/
@@ -77,24 +75,18 @@ static const struct cpu_efficiency table_efficiency[] = {
static unsigned long *__cpu_capacity;
#define cpu_capacity(cpu) __cpu_capacity[cpu]
-static unsigned long middle_capacity = 1;
+static unsigned long max_cpu_perf;
/*
* Iterate all CPUs' descriptor in DT and compute the efficiency
- * (as per table_efficiency). Also calculate a middle efficiency
- * as close as possible to (max{eff_i} - min{eff_i}) / 2
- * This is later used to scale the cpu_capacity field such that an
- * 'average' CPU is of middle capacity. Also see the comments near
- * table_efficiency[] and update_cpu_capacity().
+ * (as per table_efficiency). Calculate the max cpu performance too.
*/
+
static void __init parse_dt_topology(void)
{
const struct cpu_efficiency *cpu_eff;
struct device_node *cn = NULL;
- unsigned long min_capacity = ULONG_MAX;
- unsigned long max_capacity = 0;
- unsigned long capacity = 0;
- int cpu = 0;
+ int cpu = 0, i = 0;
__cpu_capacity = kcalloc(nr_cpu_ids, sizeof(*__cpu_capacity),
GFP_NOWAIT);
@@ -102,6 +94,7 @@ static void __init parse_dt_topology(void)
for_each_possible_cpu(cpu) {
const u32 *rate;
int len;
+ unsigned long cpu_perf;
/* too early to use cpu->of_node */
cn = of_get_cpu_node(cpu, NULL);
@@ -124,46 +117,35 @@ static void __init parse_dt_topology(void)
continue;
}
- capacity = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency;
-
- /* Save min capacity of the system */
- if (capacity < min_capacity)
- min_capacity = capacity;
-
- /* Save max capacity of the system */
- if (capacity > max_capacity)
- max_capacity = capacity;
-
- cpu_capacity(cpu) = capacity;
+ cpu_perf = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency;
+ cpu_capacity(cpu) = cpu_perf;
+ max_cpu_perf = max(max_cpu_perf, cpu_perf);
+ i++;
}
- /* If min and max capacities are equals, we bypass the update of the
- * cpu_scale because all CPUs have the same capacity. Otherwise, we
- * compute a middle_capacity factor that will ensure that the capacity
- * of an 'average' CPU of the system will be as close as possible to
- * SCHED_CAPACITY_SCALE, which is the default value, but with the
- * constraint explained near table_efficiency[].
- */
- if (4*max_capacity < (3*(max_capacity + min_capacity)))
- middle_capacity = (min_capacity + max_capacity)
- >> (SCHED_CAPACITY_SHIFT+1);
- else
- middle_capacity = ((max_capacity / 3)
- >> (SCHED_CAPACITY_SHIFT-1)) + 1;
-
+ if (i < num_possible_cpus())
+ max_cpu_perf = 0;
}
/*
* Look for a customed capacity of a CPU in the cpu_capacity table during the
* boot. The update of all CPUs is in O(n^2) for heteregeneous system but the
- * function returns directly for SMP system.
+ * function returns directly for SMP systems or if there is no complete set
+ * of cpu efficiency, clock frequency data for each cpu.
*/
static void update_cpu_capacity(unsigned int cpu)
{
- if (!cpu_capacity(cpu))
+ unsigned long capacity = cpu_capacity(cpu);
+
+ if (!capacity || !max_cpu_perf) {
+ cpu_capacity(cpu) = 0;
return;
+ }
+
+ capacity *= SCHED_CAPACITY_SCALE;
+ capacity /= max_cpu_perf;
- set_capacity_scale(cpu, cpu_capacity(cpu) / middle_capacity);
+ set_capacity_scale(cpu, capacity);
pr_info("CPU%u: update cpu_capacity %lu\n",
cpu, arch_scale_cpu_capacity(NULL, cpu));
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
