On Wed, 13 May 2015 16:27:58 +0530, ram.i hcltech wrote: > spi interface for sc16is7xx is added along with Kconfig flag > to enable spi or i2c, thus in a instance we can have either > spi or i2c or both, in sync to the hw. > > Signed-off-by: ram.i hcltech <indrakanti_...@hotmail.com> > --- > > Changes in v2: > -Added seprate flags for i2c and spi > -Added space in the comments lines > -Added MODULE_ALIAS for spi interface > --- > drivers/tty/serial/Kconfig | 27 +++++++++++++++-- > drivers/tty/serial/sc16is7xx.c | 69 > +++++++++++++++++++++++++++++++++++++++++- > 2 files changed, 92 insertions(+), 4 deletions(-) > > diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig > index f8120c1..8c505b2 100644 > --- a/drivers/tty/serial/Kconfig > +++ b/drivers/tty/serial/Kconfig > @@ -1181,13 +1181,34 @@ config SERIAL_SCCNXP_CONSOLE > > config SERIAL_SC16IS7XX > tristate "SC16IS7xx serial support" > - depends on I2C
Please keep the dependency like this: depends on I2C || SPI_MASTER (or SPI, I don't know what's the difference. SPI seems fine.) > select SERIAL_CORE > - select REGMAP_I2C if I2C > help > This selects support for SC16IS7xx serial ports. > Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752, > - SC16IS760 and SC16IS762. > + SC16IS760 and SC16IS762, over i2c or spi. > + select at least one of the i2c or spi interface. I would phrase the help message like this: This selects support for SC16IS7xx serial ports. Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752, SC16IS760 and SC16IS762. Select supported buses using options below. > +config SERIAL_SC16IS7XX_I2C > + bool "SC16IS7xx for I2C interface" Please add "default y" to minimize oldconfig pain for those already using the driver. > + depends on SERIAL_SC16IS7XX=y Why =y? > + depends on I2C > + select REGMAP_I2C if I2C > + help > + to enable i2c interface for SC16IS7XX, say Y, > + Otherwise, for i2c say N. > + this would make the driver to interface over SPI and I2C would > + be diabled. I would phrase it simply like this: Enable SC16IS7xx driver on I2C bus. > +config SERIAL_SC16IS7XX_SPI > + bool "SC16IS7xx for spi interface" > + depends on SERIAL_SC16IS7XX > + depends on SPI_MASTER Right now it is possible to select the driver without any bus-specific option being set. I don't see an easy way to avoid this but please make sure that there are no build failures/warnings in this scenario. You should also extend the binding information to include the new SPI interface (Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt) Thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
