I reworked the patch and here it is ;-)

The act8846 provides means to reset the system when used as main pmic.
This patch adds a restart handler for power cycling the regulator thus resetting
the board / soc when system-power-controller in dts is set.
This can be useful for example if there is no other means of reset.

Signed-off-by: Michael Niewoehner <[email protected]>
---
diff --git a/drivers/regulator/act8865-regulator.c 
b/drivers/regulator/act8865-regulator.c
index 2ff73d7..836d10b 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -27,6 +27,7 @@
 #include <linux/of_device.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regmap.h>
+#include <linux/reboot.h>
 
 /*
  * ACT8600 Global Register Map.
@@ -133,6 +134,8 @@
 #define        ACT8865_VOLTAGE_NUM     64
 #define ACT8600_SUDCDC_VOLTAGE_NUM     255
 
+#define ACT8846_SIPC_MASK 0x01
+
 struct act8865 {
        struct regmap *regmap;
        int off_reg;
@@ -402,6 +405,22 @@ static void act8865_power_off(void)
        while (1);
 }
 
+static int act8846_power_cycle(struct notifier_block *this,
+       unsigned long code, void *unused)
+{
+       struct act8865 *act8846;
+
+       act8846 = i2c_get_clientdata(act8865_i2c_client);
+       regmap_write(act8846->regmap, ACT8846_GLB_OFF_CTRL, ACT8846_SIPC_MASK);
+
+       return NOTIFY_DONE;
+}
+
+static struct notifier_block act8846_restart_handler = {
+       .notifier_call = act8846_power_cycle,
+       .priority = 129,
+};
+
 static int act8865_pmic_probe(struct i2c_client *client,
                              const struct i2c_device_id *i2c_id)
 {
@@ -484,6 +503,8 @@ static int act8865_pmic_probe(struct i2c_client *client,
        }
 
        if (of_device_is_system_power_controller(dev->of_node)) {
+               int ret;
+
                if (!pm_power_off && (off_reg > 0)) {
                        act8865_i2c_client = client;
                        act8865->off_reg = off_reg;
@@ -492,6 +513,14 @@ static int act8865_pmic_probe(struct i2c_client *client,
                } else {
                        dev_err(dev, "Failed to set poweroff capability, 
already defined\n");
                }
+
+               if (type == ACT8846) {
+                       act8865_i2c_client = client;
+                       ret = 
register_restart_handler(&act8846_restart_handler);
+                       if (ret)
+                               pr_err("%s: cannot register restart handler, 
%d\n",
+                                       __func__, ret);
+               }
        }
 
        /* Finally register devices */--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to