This patch add smi binding document.
Signed-off-by: Yong Wu <[email protected]>
---
.../bindings/soc/mediatek/mediatek,smi-larb.txt | 24 ++++++++++++++++++++++
.../bindings/soc/mediatek/mediatek,smi.txt | 22 ++++++++++++++++++++
2 files changed, 46 insertions(+)
create mode 100644
Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
create mode 100644
Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
diff --git
a/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
b/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
new file mode 100644
index 0000000..c06c5b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
@@ -0,0 +1,24 @@
+SMI(Smart Multimedia Interface) Local Arbiter
+
+The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
+
+Required properties:
+- compatible : must be "mediatek,mt8173-smi-larb"
+- reg : the register and size of each local arbiter.
+- smi : must be "&smi_common". Refer to bindings/soc/mediatek,smi.txt.
+- clocks : must contain one entry for each clock-names.
+ There are 2 clockes:
+ APB clock : Advanced Peripheral Bus clock, It's the clock for setting
+ the register.
+ SMI clock : It's the clock for transfer data and command.
+- clock-name: must be "apb" and "smi".
+
+Example:
+ larb0:larb@14021000 {
+ compatible = "mediatek,mt8173-smi-larb";
+ reg = <0 0x14021000 0 0x1000>;
+ smi = <&smi_common>;
+ clocks = <&mmsys MM_SMI_LARB0>,
+ <&mmsys MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
b/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
new file mode 100644
index 0000000..c2389b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
@@ -0,0 +1,22 @@
+SMI(Smart Multimedia Interface)
+
+The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
+
+Required properties:
+- compatible : must be "mediatek,mt8173-smi"
+- reg : the register and size of the smi.
+- clocks : must contain one entry for each clock-names.
+ There are 2 clockes:
+ APB clock : Advanced Peripheral Bus clock, It's the clock for setting
+ the register.
+ SMI clock : It's the clock for transfer data and command.
+- clock-name: must be "apb" and "smi".
+
+Example:
+ smi_common:smi@14022000 {
+ compatible = "mediatek,mt8173-smi";
+ reg = <0 0x14022000 0 0x1000>;
+ clocks = <&mmsys MM_SMI_COMMON>,
+ <&mmsys MM_SMI_COMMON>;
+ clock-names = "apb", "smi";
+ };
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
