On 18/05/15 10:19, Antoine Tenart wrote:
> Following the addition of a Berlin ADC driver, this patch adds the
> corresponding bindings documentation.
>
> Signed-off-by: Antoine Tenart <[email protected]>
> Acked-by: Jonathan Cameron <[email protected]>
Applied and pushed out as the togreg branch of iio.git.
Thanks,
> ---
> .../devicetree/bindings/iio/adc/berlin2_adc.txt | 19
> +++++++++++++++++++
> 1 file changed, 19 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
> b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
> new file mode 100644
> index 000000000000..908334c6b07f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
> @@ -0,0 +1,19 @@
> +* Berlin Analog to Digital Converter (ADC)
> +
> +The Berlin ADC has 8 channels, with one connected to a temperature sensor.
> +It is part of the system controller register set. The ADC node should be a
> +sub-node of the system controller node.
> +
> +Required properties:
> +- compatible: must be "marvell,berlin2-adc"
> +- interrupts: the interrupts for the ADC and the temperature sensor
> +- interrupt-names: should be "adc" and "tsen"
> +
> +Example:
> +
> +adc: adc {
> + compatible = "marvell,berlin2-adc";
> + interrupt-parent = <&sic>;
> + interrupts = <12>, <14>;
> + interrupt-names = "adc", "tsen";
> +};
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
