On 05/26/2015 04:39 PM, Ankit Gupta wrote:
The spmi-pmic-arb is also an interrupt controller. It gets a single aggregate irq and disseminates it to individual pmic-peripheral drivers. Each pmic-peripheral has a unique apid number, and can have multiple interrupt capable functions. The registered apid range shows the lowest and highest apid numbers of pmic-peripheral drivers which request irqs. Pid is the base address of that peripheral. For performance measurement, tracepoints are added at the beginning of the aggregate irq and at the end of the individual pmic-peripheral irqs.Following is a list showing the new tracepoint events: spmi_pmic_arb_aggregate_irq_start: aggregate irq number and registered apid range. spmi_pmic_arb_apid_irq_end: apid, irq, func_num, sid and pid. SPMI Interrupts tracepoints can be enabled like: echo 1 >/sys/kernel/debug/tracing/events/spmi-pmic-arb/enable and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace that look like: ... spmi_pmic_arb_aggregate_irq_start: irq=150 registered apid range=(3,189) ... spmi_pmic_arb_apid_irq_end: apid=3 irq=1 func_num=0 sid=0 pid=0x8 Suggested-by: Sagar Dharia <sdha...@codeaurora.org> Signed-off-by: Gilad Avidov <gavi...@codeaurora.org> Signed-off-by: Ankit Gupta <ankgu...@codeaurora.org> ---
How is this any better than irq tracepoints that we already have for generic irqs?
-- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
