On Fri, 12 Aug 2005 09:43:31 +1000, Grant Coady <[EMAIL PROTECTED]> wrote:
Hi there, Problem was dataloss on extracting kernel source, sometimes only one character changed. Details on http://bugsplatter.mine.nu/test/boxen/sempro/ Not the NIC, not reiserfs, not the kernel config, not even the SATA data cable... Not make sense :o) Dataloss seemed to be the buffered memory copy of the tarball, but this box also compile several hundred kernels in a session without a problem. It also locked up after 4 1/2 hours compiling, at that time I thought a kernel config change fixed the issue. Solution? Set BIOS memory timing to manual, thinking perhaps BIOS sometimes not read SPD EEPROM correctly, 'cos it was like I had bad memory only sometimes, reboot, memory okay, next day maybe something bad again. I'll be extracting source tarballs twice and diff for some time to be sure. Built the box in March, it sometimes locked up, I'd do some ad hoc kernel config adjustments and carry on. This time I try to methodically nail the issue and got nowhere with configuration changes. Does BIOS not setting memory timing properly sometimes sound like a reasonable explanation for the fault? Extracted about 100 tarballs without error. Currently running 2.6.13-rc6-git5 which produced heaps of errors before I attacked the hardware, reseating memory modules, AGP card and adjust the BIOS settings. Grant. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/