This patch enables support for Toshiba BENAND.
Toshiba BENAND is a SLC NAND solution that automatically generates ECC
inside NAND chip. Newer generation SLC NAND devices of today need multi-bit
hardware ECC by NAND controller in SoC. BENAND solution is ECC free,
has high performance and backward compatibility in NAND chip trend.

Signed-off-by: KOBAYASHI Yoshitake <[email protected]>
---
 drivers/mtd/nand/Kconfig     |   16 ++++++++++++++++
 drivers/mtd/nand/Makefile    |    1 +
 drivers/mtd/nand/nand_base.c |   32 ++++++++++++++++++++++++++++++--
 include/linux/mtd/nand.h     |    3 +++
 4 files changed, 50 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 5897d8d..2f11d43 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -22,6 +22,22 @@ menuconfig MTD_NAND
 
 if MTD_NAND
 
+config MTD_NAND_BENAND
+       tristate
+       depends on MTD_NAND_BENAND_ENABLE
+       default MTD_NAND
+
+config MTD_NAND_BENAND_ENABLE
+       bool "Support for Toshiba BENAND (Built-in ECC NAND)"
+       default y
+       help
+               Toshiba BENAND is a SLC NAND solution that automatically
+               generates ECC inside NAND chip.
+               Newer generation SLC NAND devices of today need multi-bit
+               hardware ECC by NAND controller in SoC.
+               BENAND solution is ECC free, has high performance and
+               backward compatibility in NAND chip trend.
+
 config MTD_NAND_BCH
        tristate
        select BCH
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 582bbd05..afd26f0 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_MTD_NAND)                 += nand.o
+obj-$(CONFIG_MTD_NAND_BENAND)  += nand_benand.o
 obj-$(CONFIG_MTD_NAND_ECC)             += nand_ecc.o
 obj-$(CONFIG_MTD_NAND_BCH)             += nand_bch.o
 obj-$(CONFIG_MTD_NAND_IDS)             += nand_ids.o
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index c2e1232..98a8932 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -43,6 +43,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/nand_bch.h>
+#include <linux/mtd/nand_benand.h>
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
 #include <linux/leds.h>
@@ -3526,8 +3527,17 @@ static void nand_decode_ext_id(struct mtd_info *mtd, 
struct nand_chip *chip,
                if (id_len >= 6 && id_data[0] == NAND_MFR_TOSHIBA &&
                                nand_is_slc(chip) &&
                                (id_data[5] & 0x7) == 0x6 /* 24nm */ &&
-                               !(id_data[4] & 0x80) /* !BENAND */) {
-                       mtd->oobsize = 32 * mtd->writesize >> 9;
+                               (id_data[4] & 0x80) /* BENAND */) {
+                       pr_info("24nm BENAND\n");
+
+                       if (IS_ENABLED(CONFIG_MTD_NAND_BENAND)) {
+                               chip->ecc.mode = NAND_ECC_BENAND;
+                               pr_info("Selected BENAND Driver\n");
+                       }
+
+               } else {
+                       pr_info("24nm SLC NAND\n");
+                       mtd->oobsize = 32 * mtd->writesize >> 9; /* !BENAND */
                }
 
        }
@@ -4075,6 +4085,24 @@ int nand_scan_tail(struct mtd_info *mtd)
                }
                break;
 
+       case NAND_ECC_BENAND:
+               if (!mtd_nand_has_benand()) {
+                       pr_warn("CONFIG_MTD_NAND_BENAND not enabled\n");
+                       BUG();
+               }
+               ecc->calculate = NULL;
+               ecc->correct = NULL;
+               ecc->read_page = nand_read_page_benand;
+               ecc->read_subpage = nand_read_subpage_benand;
+               ecc->write_page = nand_write_page_raw;
+               ecc->read_page_raw = nand_read_page_raw;
+               ecc->write_page_raw = nand_write_page_raw;
+               ecc->read_oob = nand_read_oob_std;
+               ecc->write_oob = nand_write_oob_std;
+
+               nand_benand_init(mtd);
+               break;
+
        case NAND_ECC_NONE:
                pr_warn("NAND_ECC_NONE selected by board driver. This is not 
recommended!\n");
                ecc->read_page = nand_read_page_raw;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 3d4ea7e..8f59ad9 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -101,6 +101,8 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, 
uint64_t len);
 /* Status bits */
 #define NAND_STATUS_FAIL       0x01
 #define NAND_STATUS_FAIL_N1    0x02
+/* Recommended to rewrite for BENAND */
+#define NAND_STATUS_RECOM_REWRT        0x08
 #define NAND_STATUS_TRUE_READY 0x20
 #define NAND_STATUS_READY      0x40
 #define NAND_STATUS_WP         0x80
@@ -115,6 +117,7 @@ typedef enum {
        NAND_ECC_HW_SYNDROME,
        NAND_ECC_HW_OOB_FIRST,
        NAND_ECC_SOFT_BCH,
+       NAND_ECC_BENAND,
 } nand_ecc_modes_t;
 
 /*
-- 
1.7.2.5


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to