From: Borislav Petkov <b...@suse.de>
Save us an indentation level, widen to 80 cols, make the text more
succinct and slender. Use i as the bank variable, same as what the
documentation uses.
Signed-off-by: Borislav Petkov <b...@suse.de>
---
drivers/edac/mce_amd_inj.c | 79 ++++++++++++++++++++++++----------------------
1 file changed, 41 insertions(+), 38 deletions(-)
diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c
index 012b61a33a60..30227f30e7c6 100644
--- a/drivers/edac/mce_amd_inj.c
+++ b/drivers/edac/mce_amd_inj.c
@@ -256,10 +256,10 @@ static void do_inject(void)
if (inj_type == DFR_INT_INJ) {
/*
* Ensure necessary status bits for deferred errors:
- * a. MCx_STATUS[Deferred] is set -
+ * a. MCi_STATUS[Deferred] is set -
* This is to ensure the error will be handled by the
* interrupt handler
- * b. unset MCx_STATUS[UC]
+ * b. unset MCi_STATUS[UC]
* As deferred errors are _not_ UC
*/
i_mce.status |= MCI_STATUS_DEFERRED;
@@ -346,42 +346,45 @@ MCE_INJECT_GET(bank);
DEFINE_SIMPLE_ATTRIBUTE(bank_fops, inj_bank_get, inj_bank_set, "%llu\n");
static const char readme_msg[] =
- "\nDescription of the files and their usages:\n\n"
- "status: Set a value to be programmed into MCx_STATUS(bank)\n"
- "\t The status bits provide insight into the type of\n"
- "\t error that caused the MCE.\n\n"
- "misc: Set value of MCx_MISC(bank)\n"
- "\t misc register provides auxiliary info about the error. This\n"
- "\t register is typically used for error thresholding purpose and\n"
- "\t validity of the register is indicated by MCx_STATUS[MiscV]\n\n"
- "addr: Error address value to be written to MCx_ADDR(bank)\n"
- "\t This register is used to log address information associated\n"
- "\t with the error.\n\n"
- "Note: See respective BKDGs for the exact bit definitions of the\n"
- "\t above registers as they mirror the MCi_[STATUS | MISC | ADDR]\n"
- "\t hardware registers.\n\n"
- "bank: Specify the bank you want to inject the error into.\n"
- "\t The number of banks in a processor varies and is family/model\n"
- "\t dependent. So, a sanity check performed while writing.\n"
- "\t Writing to this file will trigger a #MC or APIC interrupts or\n"
- "\t invoke the error decoder routines for AMD processors. The value\n"
- "\t in 'flags' file decides which of above actions is triggered.\n\n"
- "flags: Write to this file to speficy the error injection policy.\n"
- "\t Allowed values:\n"
- "\t\t\"sw\" - SW error injection, Only calls error decoder\n"
- "\t\t\troutines to print error info in human readable format\n"
- "\t\t\"hw\" - HW error injection, Forces a #MC,\n"
- "\t\t\tcauses exception handler to handle the error\n"
- "\t\t\tif UC or poll handler catches it if CE\n"
- "\t\t\tWarning: Might cause system panic if MCx_STATUS[PCC]\n"
- "\t\t\tis set. For debug purposes, consider setting\n"
- "\t\t\t/<debugfs_mountpoint>/mce/fake_panic\n"
- "\t\t\"dfr\" - Trigger APIC interrupt for Deferred error\n"
- "\t\t\tError is handled by deferred error apic handler if\n"
- "\t\t\tfeature is present in HW.\n"
- "\t\t\"thr\" - Trigger APIC interrupt for threshold error\n"
- "\t\t\tError is handled by threshold apic handler\n\n"
- "cpu: The cpu to inject the error on.\n\n";
+"Description of the files and their usages:\n"
+"\n"
+"Note1: i refers to the bank number below.\n"
+"Note2: See respective BKDGs for the exact bit definitions of the files
below\n"
+"as they mirror the hardware registers.\n"
+"\n"
+"status:\t Set MCi_STATUS: the bits in that MSR control the error type and\n"
+"\t attributes of the error which caused the MCE.\n"
+"\n"
+"misc:\t Set MCi_MISC: provide auxiliary info about the error. It is mostly\n"
+"\t used for error thresholding purposes and its validity is indicated by\n"
+"\t MCi_STATUS[MiscV].\n"
+"\n"
+"addr:\t Error address value to be written to MCi_ADDR. Log address
information\n"
+"\t associated with the error.\n"
+"\n"
+"cpu:\t The CPU to inject the error on.\n"
+"\n"
+"bank:\t Specify the bank you want to inject the error into: the number of\n"
+"\t banks in a processor varies and is family/model-specific, therefore, the\n"
+"\t supplied value is sanity-checked. Setting the bank value also triggers
the\n"
+"\t injection.\n"
+"\n"
+"flags:\t Injection type to be performed. Writing to this file will trigger
a\n"
+"\t real machine check, an APIC interrupt or invoke the error decoder
routines\n"
+"\t for AMD processors.\n"
+"\n"
+"\t Allowed error injection types:\n"
+"\t - \"sw\": Software error injection. Decode error to a human-readable \n"
+"\t format only. Safe to use.\n"
+"\t - \"hw\": Hardware error injection. Causes the #MC exception handler to
\n"
+"\t handle the error. Be warned: might cause system panic if
MCi_STATUS[PCC] \n"
+"\t is set. Therefore, consider setting (debugfs_mountpoint)/mce/fake_panic
\n"
+"\t before injecting.\n"
+"\t - \"dfr\": Trigger Deferred error handled by the deferred error APIC
handler \n"
+"\t if the feature is present in HW.\n"
+"\t - \"thr\": Trigger Thresholding error handled by the thresholding error
\n"
+"\t APIC handler.\n"
+"\n";
static ssize_t
inj_readme_read(struct file *filp, char __user *ubuf,
--
2.3.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
