Some entries in the Kconfig are improperly indented with spaces instead of
tabs.
Also fix whitespaces in Makefile.
Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
---
drivers/rtc/Kconfig | 48 ++++++++++++++++++++++++------------------------
drivers/rtc/Makefile | 12 ++++++------
2 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 6d2752bdc7ce..23a5bcdf34ec 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -12,7 +12,7 @@ menuconfig RTC_CLASS
select RTC_LIB
help
Generic RTC class support. If you say yes here, you will
- be allowed to plug one or more RTCs to your system. You will
+ be allowed to plug one or more RTCs to your system. You will
probably want to enable one or more of the interfaces below.
if RTC_CLASS
@@ -165,10 +165,10 @@ config RTC_DRV_88PM80X
will be called rtc-88pm80x.
config RTC_DRV_ABB5ZES3
- depends on I2C
- select REGMAP_I2C
- tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
- help
+ depends on I2C
+ select REGMAP_I2C
+ tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
+ help
If you say yes here you get support for the Abracon
AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip.
@@ -366,10 +366,10 @@ config RTC_DRV_ISL12022
will be called rtc-isl12022.
config RTC_DRV_ISL12057
- depends on I2C
- select REGMAP_I2C
- tristate "Intersil ISL12057"
- help
+ depends on I2C
+ select REGMAP_I2C
+ tristate "Intersil ISL12057"
+ help
If you say yes here you get support for the Intersil ISL12057
I2C RTC chip.
@@ -604,13 +604,13 @@ comment "SPI RTC drivers"
if SPI_MASTER
config RTC_DRV_M41T93
- tristate "ST M41T93"
- help
- If you say yes here you will get support for the
- ST M41T93 SPI RTC chip.
+ tristate "ST M41T93"
+ help
+ If you say yes here you will get support for the
+ ST M41T93 SPI RTC chip.
- This driver can also be built as a module. If so, the module
- will be called rtc-m41t93.
+ This driver can also be built as a module. If so, the module
+ will be called rtc-m41t93.
config RTC_DRV_M41T94
tristate "ST M41T94"
@@ -1201,7 +1201,7 @@ config RTC_DRV_SH
Say Y here to enable support for the on-chip RTC found in
most SuperH processors.
- To compile this driver as a module, choose M here: the
+ To compile this driver as a module, choose M here: the
module will be called rtc-sh.
config RTC_DRV_VR41XX
@@ -1300,14 +1300,14 @@ config RTC_DRV_GENERIC
just say Y.
config RTC_DRV_PXA
- tristate "PXA27x/PXA3xx"
- depends on ARCH_PXA
- help
- If you say Y here you will get access to the real time clock
- built into your PXA27x or PXA3xx CPU.
-
- This RTC driver uses PXA RTC registers available since pxa27x
- series (RDxR, RYxR) instead of legacy RCNR, RTAR.
+ tristate "PXA27x/PXA3xx"
+ depends on ARCH_PXA
+ help
+ If you say Y here you will get access to the real time clock
+ built into your PXA27x or PXA3xx CPU.
+
+ This RTC driver uses PXA RTC registers available since pxa27x
+ series (RDxR, RYxR) instead of legacy RCNR, RTAR.
config RTC_DRV_VT8500
tristate "VIA/WonderMedia 85xx SoC RTC"
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 41ec0388a1c3..a39d8034149d 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -14,14 +14,14 @@ ifdef CONFIG_RTC_DRV_EFI
rtc-core-y += rtc-efi-platform.o
endif
-rtc-core-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o
-rtc-core-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o
-rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
+rtc-core-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o
+rtc-core-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o
+rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
# Keep the list ordered.
obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o
-obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-88pm860x.o
+obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-88pm860x.o
obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o
obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o
obj-$(CONFIG_RTC_DRV_ABB5ZES3) += rtc-ab-b5ze-s3.o
@@ -56,7 +56,7 @@ obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o
obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
obj-$(CONFIG_RTC_DRV_DS1685_FAMILY) += rtc-ds1685.o
obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
-obj-$(CONFIG_RTC_DRV_DS2404) += rtc-ds2404.o
+obj-$(CONFIG_RTC_DRV_DS2404) += rtc-ds2404.o
obj-$(CONFIG_RTC_DRV_DS3232) += rtc-ds3232.o
obj-$(CONFIG_RTC_DRV_DS3234) += rtc-ds3234.o
obj-$(CONFIG_RTC_DRV_EFI) += rtc-efi.o
@@ -84,7 +84,7 @@ obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
obj-$(CONFIG_RTC_DRV_MAX77686) += rtc-max77686.o
-obj-$(CONFIG_RTC_DRV_MAX77802) += rtc-max77802.o
+obj-$(CONFIG_RTC_DRV_MAX77802) += rtc-max77802.o
obj-$(CONFIG_RTC_DRV_MAX8907) += rtc-max8907.o
obj-$(CONFIG_RTC_DRV_MAX8925) += rtc-max8925.o
obj-$(CONFIG_RTC_DRV_MAX8997) += rtc-max8997.o
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
