Migrate atmel driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Nicolas Ferre <nicolas.fe...@atmel.com>
Cc: Alexandre Belloni <alexandre.bell...@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagn...@jcrosoft.com>
Signed-off-by: Viresh Kumar <viresh.ku...@linaro.org>
---
 drivers/clocksource/timer-atmel-pit.c | 41 +++++++++++++++--------------------
 1 file changed, 18 insertions(+), 23 deletions(-)

diff --git a/drivers/clocksource/timer-atmel-pit.c 
b/drivers/clocksource/timer-atmel-pit.c
index c0304ff608b0..58753223585b 100644
--- a/drivers/clocksource/timer-atmel-pit.c
+++ b/drivers/clocksource/timer-atmel-pit.c
@@ -90,33 +90,27 @@ static cycle_t read_pit_clk(struct clocksource *cs)
        return elapsed;
 }
 
+static int pit_clkevt_shutdown(struct clock_event_device *dev)
+{
+       struct pit_data *data = clkevt_to_pit_data(dev);
+
+       /* disable irq, leaving the clocksource active */
+       pit_write(data->base, AT91_PIT_MR, (data->cycle - 1) | AT91_PIT_PITEN);
+       return 0;
+}
+
 /*
  * Clockevent device:  interrupts every 1/HZ (== pit_cycles * MCK/16)
  */
-static void
-pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
+static int pit_clkevt_set_periodic(struct clock_event_device *dev)
 {
        struct pit_data *data = clkevt_to_pit_data(dev);
 
-       switch (mode) {
-       case CLOCK_EVT_MODE_PERIODIC:
-               /* update clocksource counter */
-               data->cnt += data->cycle * PIT_PICNT(pit_read(data->base, 
AT91_PIT_PIVR));
-               pit_write(data->base, AT91_PIT_MR,
-                         (data->cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN);
-               break;
-       case CLOCK_EVT_MODE_ONESHOT:
-               BUG();
-               /* FALLTHROUGH */
-       case CLOCK_EVT_MODE_SHUTDOWN:
-       case CLOCK_EVT_MODE_UNUSED:
-               /* disable irq, leaving the clocksource active */
-               pit_write(data->base, AT91_PIT_MR,
-                         (data->cycle - 1) | AT91_PIT_PITEN);
-               break;
-       case CLOCK_EVT_MODE_RESUME:
-               break;
-       }
+       /* update clocksource counter */
+       data->cnt += data->cycle * PIT_PICNT(pit_read(data->base, 
AT91_PIT_PIVR));
+       pit_write(data->base, AT91_PIT_MR,
+                 (data->cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN);
+       return 0;
 }
 
 static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
@@ -162,7 +156,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void 
*dev_id)
        WARN_ON_ONCE(!irqs_disabled());
 
        /* The PIT interrupt may be disabled, and is shared */
-       if ((data->clkevt.mode == CLOCK_EVT_MODE_PERIODIC) &&
+       if (clockevent_state_periodic(&data->clkevt) &&
            (pit_read(data->base, AT91_PIT_SR) & AT91_PIT_PITS)) {
                unsigned nr_ticks;
 
@@ -227,7 +221,8 @@ static void __init at91sam926x_pit_common_init(struct 
pit_data *data)
        data->clkevt.rating = 100;
        data->clkevt.cpumask = cpumask_of(0);
 
-       data->clkevt.set_mode = pit_clkevt_mode;
+       data->clkevt.set_state_shutdown = pit_clkevt_shutdown;
+       data->clkevt.set_state_periodic = pit_clkevt_set_periodic;
        data->clkevt.resume = at91sam926x_pit_resume;
        data->clkevt.suspend = at91sam926x_pit_suspend;
        clockevents_register_device(&data->clkevt);
-- 
2.4.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to