Warnings found by checkpatch.pl

WARNING: please, no space before tabs
/drivers/staging/comedi/drivers/das16m1.c:83
+  404-407 ^I8254$

WARNING: line over 80 characters
/drivers/staging/comedi/drivers/das16m1.c:414
+   if (devpriv->adc_count == 0 && hw_counter == devpriv->initial_hw_count) {

/drivers/staging/comedi/drivers/das16m1.c:417
/drivers/staging/comedi/drivers/das16m1.c:418
/drivers/staging/comedi/drivers/das16m1.c:419
/drivers/staging/comedi/drivers/das16m1.c:420
/drivers/staging/comedi/drivers/das16m1.c:421

Signed-off-by: Luis de Bethencourt <l...@debethencourt.com>
---
 drivers/staging/comedi/drivers/das16m1.c | 41 +++++++++++++++++---------------
 1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/staging/comedi/drivers/das16m1.c 
b/drivers/staging/comedi/drivers/das16m1.c
index a18a887..3a37373 100644
--- a/drivers/staging/comedi/drivers/das16m1.c
+++ b/drivers/staging/comedi/drivers/das16m1.c
@@ -69,18 +69,18 @@ irq can be omitted, although the cmd interface will not 
work without it.
 
     "cio-das16/m1"
 
-  0    a/d bits 0-3, mux               start 12 bit
-  1    a/d bits 4-11           unused
-  2    status          control
-  3    di 4 bit                do 4 bit
-  4    unused                  clear interrupt
-  5    interrupt, pacer
-  6    channel/gain queue address
-  7    channel/gain queue data
-  89ab 8254
-  cdef 8254
-  400  8255
-  404-407      8254
+  0            a/d bits 0-3, mux               start 12 bit
+  1            a/d bits 4-11           unused
+  2            status          control
+  3            di 4 bit                do 4 bit
+  4            unused                  clear interrupt
+  5            interrupt, pacer
+  6            channel/gain queue address
+  7            channel/gain queue data
+  89ab         8254
+  cdef         8254
+  400          8255
+  404-407      8254
 
 */
 
@@ -411,15 +411,18 @@ static void das16m1_handler(struct comedi_device *dev, 
unsigned int status)
        hw_counter = comedi_8254_read(devpriv->counter, 1);
        /* make sure hardware counter reading is not bogus due to initial value
         * not having been loaded yet */
-       if (devpriv->adc_count == 0 && hw_counter == devpriv->initial_hw_count) 
{
+       if (devpriv->adc_count == 0 &&
+           hw_counter == devpriv->initial_hw_count) {
                num_samples = 0;
        } else {
-               /* The calculation of num_samples looks odd, but it uses the 
following facts.
-                * 16 bit hardware counter is initialized with value of zero 
(which really
-                * means 0x1000).  The counter decrements by one on each 
conversion
-                * (when the counter decrements from zero it goes to 0xffff).  
num_samples
-                * is a 16 bit variable, so it will roll over in a similar 
fashion to the
-                * hardware counter.  Work it out, and this is what you get. */
+               /* The calculation of num_samples looks odd, but it uses the
+                * following facts. 16 bit hardware counter is initialized with
+                * value of zero (which really means 0x1000).  The counter
+                * decrements by one on each conversion (when the counter
+                * decrements from zero it goes to 0xffff).  num_samples is a
+                * 16 bit variable, so it will roll over in a similar fashion
+                * to the hardware counter.  Work it out, and this is what you
+                * get. */
                num_samples = -hw_counter - devpriv->adc_count;
        }
        /*  check if we only need some of the points */
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to