Deprecate using phy-omap-control driver to power on/off the PHY, and use *syscon* framework to do the same. This handles powering on/off the PHY for the USB2 PHYs used in various TI SoCs.
Signed-off-by: Kishon Vijay Abraham I <[email protected]> --- Documentation/devicetree/bindings/phy/ti-phy.txt | 6 +- drivers/phy/phy-omap-usb2.c | 101 ++++++++++++++++++---- include/linux/phy/omap_usb.h | 18 ++++ 3 files changed, 107 insertions(+), 18 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index b9101b9..5bfe461 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -42,10 +42,14 @@ Required properties: * "wkupclk" - wakeup clock. * "refclk" - reference clock (optional). -Optional properties: +Deprecated properties: - ctrl-module : phandle of the control module used by PHY driver to power on the PHY. +Recommended properies: +- syscon-phy-power : phandle/offset pair. Phandle to the system control + module and the register offset to power on/off the PHY. + This is usually a subnode of ocp2scp to which it is connected. usb2phy@4a0ad080 { diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 2f7220f..180b066 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -29,6 +29,8 @@ #include <linux/delay.h> #include <linux/phy/omap_control_phy.h> #include <linux/phy/phy.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> #include <linux/of_platform.h> #define USB2PHY_DISCON_BYP_LATCH (1 << 31) @@ -97,22 +99,65 @@ static int omap_usb_set_peripheral(struct usb_otg *otg, return 0; } -static int omap_usb_power_off(struct phy *x) +static int omap_usb_phy_power(struct omap_usb *phy, int on) { - struct omap_usb *phy = phy_get_drvdata(x); + u32 val = 0; + u32 mask; + int ret; - omap_control_phy_power(phy->control_dev, 0); + if (phy->syscon_phy_power) { + switch (phy->type) { + case TYPE_USB2: + mask = OMAP_DEV_PHY_PD; + if (!on) + val = OMAP_DEV_PHY_PD; + break; + case TYPE_DRA7USB2: + mask = OMAP_USB2_PHY_PD; + if (!on) + val = OMAP_USB2_PHY_PD; + break; + case TYPE_AM437USB2: + mask = AM437X_USB2_PHY_PD | + AM437X_USB2_OTG_PD | + AM437X_USB2_OTGVDET_EN | + AM437X_USB2_OTGSESSEND_EN; + if (on) { + val = AM437X_USB2_OTGVDET_EN | + AM437X_USB2_OTGSESSEND_EN; + } else { + val = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD; + } + break; + default: + dev_err(phy->dev, "%s: type %d not recognized\n", + __func__, phy->type); + return -EINVAL; + } + + ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg, + mask, val); + if (ret < 0) + return ret; + } else { + omap_control_phy_power(phy->control_dev, on); + } return 0; } -static int omap_usb_power_on(struct phy *x) +static int omap_usb_power_off(struct phy *x) { struct omap_usb *phy = phy_get_drvdata(x); - omap_control_phy_power(phy->control_dev, 1); + return omap_usb_phy_power(phy, false); +} - return 0; +static int omap_usb_power_on(struct phy *x) +{ + struct omap_usb *phy = phy_get_drvdata(x); + + return omap_usb_phy_power(phy, true); } static int omap_usb_init(struct phy *x) @@ -147,26 +192,31 @@ static struct phy_ops ops = { static const struct usb_phy_data omap_usb2_data = { .label = "omap_usb2", .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS, + .type = TYPE_USB2, }; static const struct usb_phy_data omap5_usb2_data = { .label = "omap5_usb2", .flags = 0, + .type = TYPE_USB2, }; static const struct usb_phy_data dra7x_usb2_data = { .label = "dra7x_usb2", .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, + .type = TYPE_USB2, }; static const struct usb_phy_data dra7x_usb2_phy2_data = { .label = "dra7x_usb2_phy2", .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, + .type = TYPE_DRA7USB2, }; static const struct usb_phy_data am437x_usb2_data = { .label = "am437x_usb2", .flags = 0, + .type = TYPE_AM437USB2, }; static const struct of_device_id omap_usb2_id_table[] = { @@ -223,6 +273,7 @@ static int omap_usb2_probe(struct platform_device *pdev) return -ENOMEM; phy->dev = &pdev->dev; + phy->type = phy_data->type; phy->phy.dev = phy->dev; phy->phy.label = phy_data->label; @@ -237,20 +288,36 @@ static int omap_usb2_probe(struct platform_device *pdev) phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT; } - control_node = of_parse_phandle(node, "ctrl-module", 0); - if (!control_node) { - dev_err(&pdev->dev, "Failed to get control device phandle\n"); - return -EINVAL; - } + phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node, + "syscon-phy-power"); + if (IS_ERR(phy->syscon_phy_power)) { + dev_info(&pdev->dev, + "can't get syscon-phy-power, using control device\n"); + phy->syscon_phy_power = NULL; + + control_node = of_parse_phandle(node, "ctrl-module", 0); + if (!control_node) { + dev_err(&pdev->dev, + "Failed to get control device phandle\n"); + return -EINVAL; + } - control_pdev = of_find_device_by_node(control_node); - if (!control_pdev) { - dev_err(&pdev->dev, "Failed to get control device\n"); - return -EINVAL; + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + return -EINVAL; + } + phy->control_dev = &control_pdev->dev; + } else { + if (of_property_read_u32_index(node, + "syscon-phy-power", 1, + &phy->power_reg)) { + dev_err(&pdev->dev, + "couldn't get power reg. offset\n"); + return -EINVAL; + } } - phy->control_dev = &control_pdev->dev; - otg->set_host = omap_usb_set_host; otg->set_peripheral = omap_usb_set_peripheral; if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS) diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h index dc2c541..de933ab 100644 --- a/include/linux/phy/omap_usb.h +++ b/include/linux/phy/omap_usb.h @@ -30,6 +30,12 @@ struct usb_dpll_params { u32 mf; }; +enum omap_usb_phy_type { + TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */ + TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */ + TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */ +}; + struct omap_usb { struct usb_phy phy; struct phy_companion *comparator; @@ -40,11 +46,15 @@ struct omap_usb { struct clk *wkupclk; struct clk *optclk; u8 flags; + enum omap_usb_phy_type type; + struct regmap *syscon_phy_power; /* ctrl. reg. acces */ + unsigned int power_reg; /* power reg. index within syscon */ }; struct usb_phy_data { const char *label; u8 flags; + enum omap_usb_phy_type type; }; /* Driver Flags */ @@ -52,6 +62,14 @@ struct usb_phy_data { #define OMAP_USB2_HAS_SET_VBUS (1 << 1) #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT (1 << 2) +#define OMAP_DEV_PHY_PD BIT(0) +#define OMAP_USB2_PHY_PD BIT(28) + +#define AM437X_USB2_PHY_PD BIT(0) +#define AM437X_USB2_OTG_PD BIT(1) +#define AM437X_USB2_OTGVDET_EN BIT(19) +#define AM437X_USB2_OTGSESSEND_EN BIT(20) + #define phy_to_omapusb(x) container_of((x), struct omap_usb, phy) #if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
