fixes checkpatch.pl error:
ERROR: space required before the open parenthesis '('

Signed-off-by: Juston Li <juston.h...@gmail.com>
---
 drivers/staging/sm750fb/ddk750_display.c | 20 +++++------
 drivers/staging/sm750fb/ddk750_dvi.c     |  2 +-
 drivers/staging/sm750fb/ddk750_help.c    |  2 +-
 drivers/staging/sm750fb/ddk750_mode.c    | 12 +++----
 drivers/staging/sm750fb/ddk750_power.c   |  6 ++--
 drivers/staging/sm750fb/sm750_accel.c    |  8 ++---
 drivers/staging/sm750fb/sm750_cursor.c   | 32 ++++++++---------
 drivers/staging/sm750fb/sm750_help.h     |  2 +-
 drivers/staging/sm750fb/sm750_hw.c       | 62 ++++++++++++++++----------------
 9 files changed, 73 insertions(+), 73 deletions(-)

diff --git a/drivers/staging/sm750fb/ddk750_display.c 
b/drivers/staging/sm750fb/ddk750_display.c
index 1c4049f..973dec3 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -49,7 +49,7 @@ static void setDisplayControl(int ctrl, int dispState)
                        {
                                cnt++;
                                POKE32(PANEL_DISPLAY_CTRL, ulDisplayCtrlReg);
-                       } while((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) 
!=
+                       } while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) 
!=
                                        (ulDisplayCtrlReg & ~ulReservedBits));
                        printk("Set Panel Plane enbit:after tried %d times\n", 
cnt);
                }
@@ -104,7 +104,7 @@ static void setDisplayControl(int ctrl, int dispState)
                        {
                                cnt++;
                                POKE32(CRT_DISPLAY_CTRL, ulDisplayCtrlReg);
-                       } while((PEEK32(CRT_DISPLAY_CTRL) & ~ulReservedBits) !=
+                       } while ((PEEK32(CRT_DISPLAY_CTRL) & ~ulReservedBits) !=
                                        (ulDisplayCtrlReg & ~ulReservedBits));
                                printk("Set Crt Plane enbit:after tried %d 
times\n", cnt);
                }
@@ -132,7 +132,7 @@ static void setDisplayControl(int ctrl, int dispState)
 static void waitNextVerticalSync(int ctrl, int delay)
 {
        unsigned int status;
-       if(!ctrl){
+       if (!ctrl){
                /* primary controller */
 
                /* Do not wait when the Primary PLL is off or display control 
is already off.
@@ -233,14 +233,14 @@ static void swPanelPowerSequence(int disp, int delay)
 void ddk750_setLogicalDispOut(disp_output_t output)
 {
        unsigned int reg;
-       if(output & PNL_2_USAGE){
+       if (output & PNL_2_USAGE){
                /* set panel path controller select */
                reg = PEEK32(PANEL_DISPLAY_CTRL);
                reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, SELECT, (output & 
PNL_2_MASK)>>PNL_2_OFFSET);
                POKE32(PANEL_DISPLAY_CTRL, reg);
        }
 
-       if(output & CRT_2_USAGE){
+       if (output & CRT_2_USAGE){
                /* set crt path controller select */
                reg = PEEK32(CRT_DISPLAY_CTRL);
                reg = FIELD_VALUE(reg, CRT_DISPLAY_CTRL, SELECT, (output & 
CRT_2_MASK)>>CRT_2_OFFSET);
@@ -250,25 +250,25 @@ void ddk750_setLogicalDispOut(disp_output_t output)
 
        }
 
-       if(output & PRI_TP_USAGE){
+       if (output & PRI_TP_USAGE){
                /* set primary timing and plane en_bit */
                setDisplayControl(0, (output&PRI_TP_MASK)>>PRI_TP_OFFSET);
        }
 
-       if(output & SEC_TP_USAGE){
+       if (output & SEC_TP_USAGE){
                /* set secondary timing and plane en_bit*/
                setDisplayControl(1, (output&SEC_TP_MASK)>>SEC_TP_OFFSET);
        }
 
-       if(output & PNL_SEQ_USAGE){
+       if (output & PNL_SEQ_USAGE){
                /* set  panel sequence */
                swPanelPowerSequence((output&PNL_SEQ_MASK)>>PNL_SEQ_OFFSET, 4);
        }
 
-       if(output & DAC_USAGE)
+       if (output & DAC_USAGE)
                setDAC((output & DAC_MASK)>>DAC_OFFSET);
 
-       if(output & DPMS_USAGE)
+       if (output & DPMS_USAGE)
                ddk750_setDPMS((output & DPMS_MASK) >> DPMS_OFFSET);
 }
 
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c 
b/drivers/staging/sm750fb/ddk750_dvi.c
index 35866fa..4c64436 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -45,7 +45,7 @@ int dviInit(
 {
        dvi_ctrl_device_t *pCurrentDviCtrl;
        pCurrentDviCtrl = g_dcftSupportedDviController;
-       if(pCurrentDviCtrl->pfnInit != NULL)
+       if (pCurrentDviCtrl->pfnInit != NULL)
        {
                return pCurrentDviCtrl->pfnInit(edgeSelect, busSelect, 
dualEdgeClkSelect, hsyncEnable,
                                                vsyncEnable, deskewEnable, 
deskewSetting, continuousSyncEnable,
diff --git a/drivers/staging/sm750fb/ddk750_help.c 
b/drivers/staging/sm750fb/ddk750_help.c
index 1adcafc..93ed958 100644
--- a/drivers/staging/sm750fb/ddk750_help.c
+++ b/drivers/staging/sm750fb/ddk750_help.c
@@ -10,7 +10,7 @@ void ddk750_set_mmio(void __iomem *addr, unsigned short 
devId, char revId)
        mmio750 = addr;
        devId750 = devId;
        revId750 = revId;
-       if(revId == 0xfe)
+       if (revId == 0xfe)
                printk("found sm750le\n");
 }
 
diff --git a/drivers/staging/sm750fb/ddk750_mode.c 
b/drivers/staging/sm750fb/ddk750_mode.c
index 4ee9ceb..cfe528c 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -80,7 +80,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, 
pll_value_t *pll)
        int ret = 0;
        int cnt = 0;
        unsigned int ulTmpValue, ulReg;
-       if(pll->clockType == SECONDARY_PLL)
+       if (pll->clockType == SECONDARY_PLL)
        {
                /* programe secondary pixel clock */
                POKE32(CRT_PLL_CTRL, formatPllReg(pll));
@@ -107,7 +107,7 @@ static int programModeRegisters(mode_parameter_t 
*pModeParam, pll_value_t *pll)
                                          FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, 
ENABLE);
 
 
-               if(getChipType() == SM750LE){
+               if (getChipType() == SM750LE){
                        displayControlAdjust_SM750LE(pModeParam, ulTmpValue);
                }else{
                        ulReg = PEEK32(CRT_DISPLAY_CTRL)
@@ -120,7 +120,7 @@ static int programModeRegisters(mode_parameter_t 
*pModeParam, pll_value_t *pll)
                }
 
        }
-       else if(pll->clockType == PRIMARY_PLL)
+       else if (pll->clockType == PRIMARY_PLL)
        {
                unsigned int ulReservedBits;
                POKE32(PANEL_PLL_CTRL, formatPllReg(pll));
@@ -170,10 +170,10 @@ static int programModeRegisters(mode_parameter_t 
*pModeParam, pll_value_t *pll)
 
                POKE32(PANEL_DISPLAY_CTRL, ulTmpValue|ulReg);
 #if 1
-               while((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) != 
(ulTmpValue|ulReg))
+               while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) != 
(ulTmpValue|ulReg))
                {
                        cnt++;
-                       if(cnt > 1000)
+                       if (cnt > 1000)
                                break;
                        POKE32(PANEL_DISPLAY_CTRL, ulTmpValue|ulReg);
                }
@@ -193,7 +193,7 @@ int ddk750_setModeTiming(mode_parameter_t *parm, 
clock_type_t clock)
        pll.clockType = clock;
 
        uiActualPixelClk = calcPllValue(parm->pixel_clock, &pll);
-       if(getChipType() == SM750LE){
+       if (getChipType() == SM750LE){
                /* set graphic mode via IO method */
                outb_p(0x88, 0x3d4);
                outb_p(0x06, 0x3d5);
diff --git a/drivers/staging/sm750fb/ddk750_power.c 
b/drivers/staging/sm750fb/ddk750_power.c
index 44b8eb1..a2d9ee6 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -5,7 +5,7 @@
 void ddk750_setDPMS(DPMS_t state)
 {
        unsigned int value;
-       if(getChipType() == SM750LE){
+       if (getChipType() == SM750LE){
                value = PEEK32(CRT_DISPLAY_CTRL);
                POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, 
DPMS, state));
        }else{
@@ -17,7 +17,7 @@ void ddk750_setDPMS(DPMS_t state)
 
 unsigned int getPowerMode(void)
 {
-       if(getChipType() == SM750LE)
+       if (getChipType() == SM750LE)
                return 0;
        return (FIELD_GET(PEEK32(POWER_MODE_CTRL), POWER_MODE_CTRL, MODE));
 }
@@ -33,7 +33,7 @@ void setPowerMode(unsigned int powerMode)
 
        control_value = PEEK32(POWER_MODE_CTRL);
 
-       if(getChipType() == SM750LE)
+       if (getChipType() == SM750LE)
                return;
 
        switch (powerMode)
diff --git a/drivers/staging/sm750fb/sm750_accel.c 
b/drivers/staging/sm750fb/sm750_accel.c
index ed82813..3c61103 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -96,7 +96,7 @@ int hw_fillrect(struct lynx_accel *accel,
 {
        u32 deCtrl;
 
-       if(accel->de_wait() != 0)
+       if (accel->de_wait() != 0)
        {
                /* int time wait and always busy,seems hardware
                 * got something error */
@@ -248,7 +248,7 @@ unsigned int rop2)   /* ROP value */
        Note that input pitch is BYTE value, but the 2D Pitch register uses
        pixel values. Need Byte to pixel conversion.
     */
-       if(Bpp == 3){
+       if (Bpp == 3){
                        sx *= 3;
                        dx *= 3;
                        width *= 3;
@@ -344,7 +344,7 @@ int hw_imageblit(struct lynx_accel *accel,
        ul4BytesPerScan = ulBytesPerScan & ~3;
        ulBytesRemain = ulBytesPerScan & 3;
 
-       if(accel->de_wait() != 0)
+       if (accel->de_wait() != 0)
        {
                return -1;
        }
@@ -363,7 +363,7 @@ int hw_imageblit(struct lynx_accel *accel,
        Note that input pitch is BYTE value, but the 2D Pitch register uses
        pixel values. Need Byte to pixel conversion.
     */
-       if(bytePerPixel == 3){
+       if (bytePerPixel == 3){
                dx *= 3;
                width *= 3;
                startBit *= 3;
diff --git a/drivers/staging/sm750fb/sm750_cursor.c 
b/drivers/staging/sm750fb/sm750_cursor.c
index 405e24b..95cfb8f 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -122,7 +122,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
                odd=0;
 */
 
-       for(i=0;i<count;i++)
+       for (i=0;i<count;i++)
        {
                color = *pcol++;
                mask = *pmsk++;
@@ -132,15 +132,15 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
                 * but method 2 shows no lag
                 * and method 1 seems a bit wrong*/
 #if 0
-               if(rop == ROP_XOR)
+               if (rop == ROP_XOR)
                        opr = mask ^ color;
                else
                        opr = mask & color;
 
-               for(j=0;j<8;j++)
+               for (j=0;j<8;j++)
                {
 
-                       if(opr & (0x80 >> j))
+                       if (opr & (0x80 >> j))
                        {       /* use fg color,id = 2 */
                                data |= 2 << (j*2);
                        }else{
@@ -149,9 +149,9 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
                        }
                }
 #else
-               for(j=0;j<8;j++){
-                       if(mask & (0x80>>j)){
-                               if(rop == ROP_XOR)
+               for (j=0;j<8;j++){
+                       if (mask & (0x80>>j)){
+                               if (rop == ROP_XOR)
                                        opr = mask ^ color;
                                else
                                        opr = mask & color;
@@ -165,9 +165,9 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
 
                /* assume pitch is 1,2,4,8,...*/
 #if 0
-               if(!((i+1)&(pitch-1)))   /* below line equal to is line */
+               if (!((i+1)&(pitch-1)))   /* below line equal to is line */
 #else
-               if((i+1) % pitch == 0)
+               if ((i+1) % pitch == 0)
 #endif
                {
                        /* need a return */
@@ -204,7 +204,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
        pstart = cursor->vstart;
        pbuffer = pstart;
 
-       for(i=0;i<count;i++)
+       for (i=0;i<count;i++)
        {
                color = *pcol++;
                mask = *pmsk++;
@@ -212,15 +212,15 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
 
                /* either method below works well, but method 2 shows no lag */
 #if 0
-               if(rop == ROP_XOR)
+               if (rop == ROP_XOR)
                        opr = mask ^ color;
                else
                        opr = mask & color;
 
-               for(j=0;j<8;j++)
+               for (j=0;j<8;j++)
                {
 
-                       if(opr & (0x80 >> j))
+                       if (opr & (0x80 >> j))
                        {       /* use fg color,id = 2 */
                                data |= 2 << (j*2);
                        }else{
@@ -229,15 +229,15 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
                        }
                }
 #else
-               for(j=0;j<8;j++){
-                       if(mask & (1<<j))
+               for (j=0;j<8;j++){
+                       if (mask & (1<<j))
                                data |= ((color & (1<<j))?1:2)<<(j*2);
                }
 #endif
                iowrite16(data, pbuffer);
 
                /* assume pitch is 1,2,4,8,...*/
-               if(!(i&(pitch-1)))
+               if (!(i&(pitch-1)))
                {
                        /* need a return */
                        pstart += offset;
diff --git a/drivers/staging/sm750fb/sm750_help.h 
b/drivers/staging/sm750fb/sm750_help.h
index ac0744e..493af3a 100644
--- a/drivers/staging/sm750fb/sm750_help.h
+++ b/drivers/staging/sm750fb/sm750_help.h
@@ -73,7 +73,7 @@
 
 static inline unsigned int absDiff(unsigned int a, unsigned int b)
 {
-       if(a<b)
+       if (a<b)
                return b-a;
        else
                return a-b;
diff --git a/drivers/staging/sm750fb/sm750_hw.c 
b/drivers/staging/sm750fb/sm750_hw.c
index 28db9c7..5abac9b 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -44,7 +44,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* 
pdev)
         * successfully
         * */
 
-       if((ret = pci_request_region(pdev, 1, "sm750fb")))
+       if ((ret = pci_request_region(pdev, 1, "sm750fb")))
        {
                pr_err("Can not request PCI regions.\n");
                goto exit;
@@ -52,7 +52,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* 
pdev)
 
        /* now map mmio and vidmem*/
        share->pvReg = ioremap_nocache(share->vidreg_start, share->vidreg_size);
-       if(!share->pvReg){
+       if (!share->pvReg){
                pr_err("mmio failed\n");
                ret = -EFAULT;
                goto exit;
@@ -78,7 +78,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* 
pdev)
 
        /* reserve the vidmem space of smi adaptor */
 #if 0
-       if((ret = pci_request_region(pdev, 0, _moduleName_)))
+       if ((ret = pci_request_region(pdev, 0, _moduleName_)))
        {
                pr_err("Can not request PCI regions.\n");
                goto exit;
@@ -87,7 +87,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* 
pdev)
 
        share->pvMem = ioremap_wc(share->vidmem_start, share->vidmem_size);
 
-       if(!share->pvMem){
+       if (!share->pvMem){
                pr_err("Map video memory failed\n");
                ret = -EFAULT;
                goto exit;
@@ -107,19 +107,19 @@ int hw_sm750_inithw(struct lynx_share *share, struct 
pci_dev *pdev)
        
        spec_share = container_of(share, struct sm750_share, share);
        parm = &spec_share->state.initParm;
-       if(parm->chip_clk == 0)
+       if (parm->chip_clk == 0)
                parm->chip_clk = (getChipType() == SM750LE)?
                                                DEFAULT_SM750LE_CHIP_CLOCK :
                                                DEFAULT_SM750_CHIP_CLOCK;
 
-       if(parm->mem_clk == 0)
+       if (parm->mem_clk == 0)
                parm->mem_clk = parm->chip_clk;
-       if(parm->master_clk == 0)
+       if (parm->master_clk == 0)
                parm->master_clk = parm->chip_clk/3;
 
        ddk750_initHw((initchip_param_t *)&spec_share->state.initParm);
        /* for sm718,open pci burst */
-       if(share->devid == 0x718){
+       if (share->devid == 0x718){
                POKE32(SYSTEM_CTRL,
                                FIELD_SET(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, 
PCI_BURST, ON));
        }
@@ -130,10 +130,10 @@ int hw_sm750_inithw(struct lynx_share *share, struct 
pci_dev *pdev)
        ddk750_initDVIDisp();
 #endif
 
-       if(getChipType() != SM750LE)
+       if (getChipType() != SM750LE)
        {
                /* does user need CRT ?*/
-               if(spec_share->state.nocrt){
+               if (spec_share->state.nocrt){
                        POKE32(MISC_CTRL,
                                        FIELD_SET(PEEK32(MISC_CTRL),
                                        MISC_CTRL,
@@ -191,7 +191,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct 
pci_dev *pdev)
        }
 
        /* init 2d engine */
-       if(!share->accel_off){
+       if (!share->accel_off){
                hw_sm750_initAccel(share);
        }
 
@@ -228,19 +228,19 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
        channel = *output->channel;
 
 
-       if(getChipType() != SM750LE){
-               if(channel == sm750_primary){
+       if (getChipType() != SM750LE){
+               if (channel == sm750_primary){
                        pr_info("primary channel\n");
-                       if(output->paths & sm750_panel)
+                       if (output->paths & sm750_panel)
                                dispSet |= do_LCD1_PRI;
-                       if(output->paths & sm750_crt)
+                       if (output->paths & sm750_crt)
                                dispSet |= do_CRT_PRI;
 
                }else{
                        pr_info("secondary channel\n");
-                       if(output->paths & sm750_panel)
+                       if (output->paths & sm750_panel)
                                dispSet |= do_LCD1_SEC;
-                       if(output->paths & sm750_crt)
+                       if (output->paths & sm750_crt)
                                dispSet |= do_CRT_SEC;
 
                }
@@ -308,9 +308,9 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
        par = container_of(crtc, struct lynxfb_par, crtc);
        share = par->share;
 #if 1
-       if(!share->accel_off){
+       if (!share->accel_off){
                /* set 2d engine pixel format according to mode bpp */
-               switch(var->bits_per_pixel){
+               switch (var->bits_per_pixel){
                        case 8:
                                fmt = 0;
                                break;
@@ -341,19 +341,19 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
        modparm.vertical_total = var->yres + var->upper_margin + 
var->lower_margin + var->vsync_len;
 
        /* choose pll */
-       if(crtc->channel != sm750_secondary)
+       if (crtc->channel != sm750_secondary)
                clock = PRIMARY_PLL;
        else
                clock = SECONDARY_PLL;
 
        pr_debug("Request pixel clock = %lu\n", modparm.pixel_clock);
        ret = ddk750_setModeTiming(&modparm, clock);
-       if(ret){
+       if (ret){
                pr_err("Set mode timing failed\n");
                goto exit;
        }
 
-       if(crtc->channel != sm750_secondary){
+       if (crtc->channel != sm750_secondary){
                /* set pitch, offset ,width,start address ,etc... */
                POKE32(PANEL_FB_ADDRESS,
                        FIELD_SET(0, PANEL_FB_ADDRESS, STATUS, CURRENT)|
@@ -429,7 +429,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort 
index,
 int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){
        int dpms, crtdb;
        
-       switch(blank)
+       switch (blank)
        {
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
                case FB_BLANK_UNBLANK:
@@ -473,7 +473,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output * output, int 
blank){
                        return -EINVAL;
        }
 
-       if(output->paths & sm750_crt){
+       if (output->paths & sm750_crt){
                POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), 
CRT_DISPLAY_CTRL, DPMS, dpms));
                POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), 
CRT_DISPLAY_CTRL, BLANK, crtdb));
        }
@@ -535,13 +535,13 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int 
blank)
                        break;
        }
 
-       if(output->paths & sm750_crt){
+       if (output->paths & sm750_crt){
 
                POKE32(SYSTEM_CTRL, FIELD_VALUE(PEEK32(SYSTEM_CTRL), 
SYSTEM_CTRL, DPMS, dpms));
                POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), 
CRT_DISPLAY_CTRL, BLANK, crtdb));
        }
 
-       if(output->paths & sm750_panel){
+       if (output->paths & sm750_panel){
                POKE32(PANEL_DISPLAY_CTRL, 
FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, DATA, pps));
        }
 
@@ -554,7 +554,7 @@ void hw_sm750_initAccel(struct lynx_share *share)
        u32 reg;
        enable2DEngine(1);
 
-       if(getChipType() == SM750LE){
+       if (getChipType() == SM750LE){
                reg = PEEK32(DE_STATE1);
                reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, ON);
                POKE32(DE_STATE1, reg);
@@ -581,9 +581,9 @@ void hw_sm750_initAccel(struct lynx_share *share)
 int hw_sm750le_deWait(void)
 {
        int i=0x10000000;
-       while(i--){
+       while (i--){
                unsigned int dwVal = PEEK32(DE_STATE2);
-               if((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) == 
DE_STATE2_DE_STATUS_IDLE) &&
+               if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) == 
DE_STATE2_DE_STATUS_IDLE) &&
                        (FIELD_GET(dwVal, DE_STATE2, DE_FIFO)  == 
DE_STATE2_DE_FIFO_EMPTY) &&
                        (FIELD_GET(dwVal, DE_STATE2, DE_MEM_FIFO) == 
DE_STATE2_DE_MEM_FIFO_EMPTY))
                {
@@ -598,9 +598,9 @@ int hw_sm750le_deWait(void)
 int hw_sm750_deWait(void)
 {
        int i=0x10000000;
-       while(i--){
+       while (i--){
                unsigned int dwVal = PEEK32(SYSTEM_CTRL);
-               if((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) == 
SYSTEM_CTRL_DE_STATUS_IDLE) &&
+               if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) == 
SYSTEM_CTRL_DE_STATUS_IDLE) &&
                        (FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO)  == 
SYSTEM_CTRL_DE_FIFO_EMPTY) &&
                        (FIELD_GET(dwVal, SYSTEM_CTRL, DE_MEM_FIFO) == 
SYSTEM_CTRL_DE_MEM_FIFO_EMPTY))
                {
-- 
2.4.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to