Signed-off-by: Adam Thomson <adam.thomson.opensou...@diasemi.com>
---
 drivers/mfd/da9150-core.c       | 162 ++++++++++++++++++++++++++++++++++++++--
 include/linux/mfd/da9150/core.h |  19 +++++
 include/linux/mfd/da9150/fg.h   |  29 +++++++
 3 files changed, 202 insertions(+), 8 deletions(-)
 create mode 100644 include/linux/mfd/da9150/fg.h

diff --git a/drivers/mfd/da9150-core.c b/drivers/mfd/da9150-core.c
index 5549817..8feb75d 100644
--- a/drivers/mfd/da9150-core.c
+++ b/drivers/mfd/da9150-core.c
@@ -21,8 +21,80 @@
 #include <linux/interrupt.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/da9150/core.h>
+#include <linux/mfd/da9150/fg.h>
 #include <linux/mfd/da9150/registers.h>

+/* Raw device access, used for QIF */
+static int da9150_i2c_read_device(struct i2c_client *client, u8 addr, int 
count,
+                                 u8 *buf)
+{
+       struct i2c_msg xfer;
+       int ret;
+
+       /*
+        * Read is split into two transfers as device expects STOP/START rather
+        * than repeated start to carry out this kind of access.
+        */
+
+       /* Write address */
+       xfer.addr = client->addr;
+       xfer.flags = 0;
+       xfer.len = 1;
+       xfer.buf = &addr;
+
+       ret = i2c_transfer(client->adapter, &xfer, 1);
+       if (ret != 1) {
+               if (ret < 0)
+                       return ret;
+               else
+                       return -EIO;
+       }
+
+       /* Read data */
+       xfer.addr = client->addr;
+       xfer.flags = I2C_M_RD;
+       xfer.len = count;
+       xfer.buf = buf;
+
+       ret = i2c_transfer(client->adapter, &xfer, 1);
+       if (ret == 1)
+               return 0;
+       else if (ret < 0)
+               return ret;
+       else
+               return -EIO;
+}
+
+static int da9150_i2c_write_device(struct i2c_client *client, u8 addr,
+                                  int count, const u8 *buf)
+{
+       struct i2c_msg xfer;
+       u8 *reg_data;
+       int ret;
+
+       reg_data = kzalloc(1 + count, GFP_KERNEL);
+       if (!reg_data)
+               return -ENOMEM;
+
+       reg_data[0] = addr;
+       memcpy(&reg_data[1], buf, count);
+
+       /* Write address & data */
+       xfer.addr = client->addr;
+       xfer.flags = 0;
+       xfer.len = 1 + count;
+       xfer.buf = reg_data;
+
+       ret = i2c_transfer(client->adapter, &xfer, 1);
+       kfree(reg_data);
+       if (ret == 1)
+               return 0;
+       else if (ret < 0)
+               return ret;
+       else
+               return -EIO;
+}
+
 static bool da9150_volatile_reg(struct device *dev, unsigned int reg)
 {
        switch (reg) {
@@ -107,6 +179,28 @@ static const struct regmap_config da9150_regmap_config = {
        .volatile_reg = da9150_volatile_reg,
 };

+void da9150_read_qif(struct da9150 *da9150, u8 addr, int count, u8 *buf)
+{
+       int ret;
+
+       ret = da9150->read_dev(da9150->core_qif, addr, count, buf);
+       if (ret < 0)
+               dev_err(da9150->dev, "Failed to read from QIF 0x%x: %d\n",
+                       addr, ret);
+}
+EXPORT_SYMBOL_GPL(da9150_read_qif);
+
+void da9150_write_qif(struct da9150 *da9150, u8 addr, int count, const u8 *buf)
+{
+       int ret;
+
+       ret = da9150->write_dev(da9150->core_qif, addr, count, buf);
+       if (ret < 0)
+               dev_err(da9150->dev, "Failed to write to QIF 0x%x: %d\n",
+                       addr, ret);
+}
+EXPORT_SYMBOL_GPL(da9150_write_qif);
+
 u8 da9150_reg_read(struct da9150 *da9150, u16 reg)
 {
        int val, ret;
@@ -297,6 +391,15 @@ static struct resource da9150_charger_resources[] = {
        },
 };

+static struct resource da9150_fg_resources[] = {
+       {
+               .name = "FG",
+               .start = DA9150_IRQ_FG,
+               .end = DA9150_IRQ_FG,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
 static struct mfd_cell da9150_devs[] = {
        {
                .name = "da9150-gpadc",
@@ -310,6 +413,12 @@ static struct mfd_cell da9150_devs[] = {
                .resources = da9150_charger_resources,
                .num_resources = ARRAY_SIZE(da9150_charger_resources),
        },
+       {
+               .name = "da9150-fuelgauge",
+               .of_compatible = "dlg,da9150-fg",
+               .resources = da9150_fg_resources,
+               .num_resources = ARRAY_SIZE(da9150_fg_resources),
+       },
 };

 static int da9150_probe(struct i2c_client *client,
@@ -317,11 +426,14 @@ static int da9150_probe(struct i2c_client *client,
 {
        struct da9150 *da9150;
        struct da9150_pdata *pdata = dev_get_platdata(&client->dev);
+       int qif_addr;
        int ret;

        da9150 = devm_kzalloc(&client->dev, sizeof(*da9150), GFP_KERNEL);
-       if (!da9150)
-               return -ENOMEM;
+       if (!da9150) {
+               ret = -ENOMEM;
+               goto fail;
+       }

        da9150->dev = &client->dev;
        da9150->irq = client->irq;
@@ -332,19 +444,46 @@ static int da9150_probe(struct i2c_client *client,
                ret = PTR_ERR(da9150->regmap);
                dev_err(da9150->dev, "Failed to allocate register map: %d\n",
                        ret);
-               return ret;
+               goto fail;
+       }
+
+       /* Setup secondary I2C interface for QIF access */
+       qif_addr = da9150_reg_read(da9150, DA9150_CORE2WIRE_CTRL_A);
+       qif_addr = (qif_addr & DA9150_CORE_BASE_ADDR_MASK) >> 1;
+       qif_addr |= DA9150_QIF_I2C_ADDR_LSB;
+       da9150->core_qif = i2c_new_dummy(client->adapter, qif_addr);
+       if (!da9150->core_qif) {
+               dev_err(da9150->dev, "Failed to attach QIF client\n");
+               ret = -ENODEV;
+               goto fail;
        }

-       da9150->irq_base = pdata ? pdata->irq_base : -1;
+       i2c_set_clientdata(da9150->core_qif, da9150);
+       da9150->read_dev = (read_dev_t) da9150_i2c_read_device;
+       da9150->write_dev = (write_dev_t) da9150_i2c_write_device;
+
+       if (pdata) {
+               da9150->irq_base = pdata->irq_base;
+
+               da9150_devs[2].platform_data = pdata->fg_pdata;
+               da9150_devs[2].pdata_size = sizeof(struct da9150_fg_pdata);
+       } else {
+               da9150->irq_base = -1;
+       }

        ret = regmap_add_irq_chip(da9150->regmap, da9150->irq,
                                  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
                                  da9150->irq_base, &da9150_regmap_irq_chip,
                                  &da9150->regmap_irq_data);
-       if (ret)
-               return ret;
+       if (ret) {
+               dev_err(da9150->dev, "Failed to add regmap irq chip: %d\n",
+                       ret);
+               goto regmap_irq_fail;
+       }
+

        da9150->irq_base = regmap_irq_chip_get_base(da9150->regmap_irq_data);
+
        enable_irq_wake(da9150->irq);

        ret = mfd_add_devices(da9150->dev, -1, da9150_devs,
@@ -352,11 +491,17 @@ static int da9150_probe(struct i2c_client *client,
                              da9150->irq_base, NULL);
        if (ret) {
                dev_err(da9150->dev, "Failed to add child devices: %d\n", ret);
-               regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data);
-               return ret;
+               goto mfd_fail;
        }

        return 0;
+
+mfd_fail:
+       regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data);
+regmap_irq_fail:
+       i2c_unregister_device(da9150->core_qif);
+fail:
+       return ret;
 }

 static int da9150_remove(struct i2c_client *client)
@@ -365,6 +510,7 @@ static int da9150_remove(struct i2c_client *client)

        regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data);
        mfd_remove_devices(da9150->dev);
+       i2c_unregister_device(da9150->core_qif);

        return 0;
 }
diff --git a/include/linux/mfd/da9150/core.h b/include/linux/mfd/da9150/core.h
index 76e6689..98ecfea 100644
--- a/include/linux/mfd/da9150/core.h
+++ b/include/linux/mfd/da9150/core.h
@@ -15,9 +15,11 @@
 #define __DA9150_CORE_H

 #include <linux/device.h>
+#include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/regmap.h>

+
 /* I2C address paging */
 #define DA9150_REG_PAGE_SHIFT  8
 #define DA9150_REG_PAGE_MASK   0xFF
@@ -46,23 +48,40 @@
 #define DA9150_IRQ_GPADC       19
 #define DA9150_IRQ_WKUP                20

+/* Platform Data */
+struct da9150_fg_pdata;
+
 struct da9150_pdata {
        int irq_base;
+       struct da9150_fg_pdata *fg_pdata;
 };

+/* I/O function typedefs for raw access */
+typedef int (*read_dev_t)(void *client, u8 addr, int count, u8 *buf);
+typedef int (*write_dev_t)(void *client, u8 addr, int count, const u8 *buf);
+
 struct da9150 {
        struct device *dev;
        struct regmap *regmap;
+       struct i2c_client *core_qif;
+
+       read_dev_t read_dev;
+       write_dev_t write_dev;
+
        struct regmap_irq_chip_data *regmap_irq_data;
        int irq;
        int irq_base;
 };

 /* Device I/O */
+void da9150_read_qif(struct da9150 *da9150, u8 addr, int count, u8 *buf);
+void da9150_write_qif(struct da9150 *da9150, u8 addr, int count, const u8 
*buf);
+
 u8 da9150_reg_read(struct da9150 *da9150, u16 reg);
 void da9150_reg_write(struct da9150 *da9150, u16 reg, u8 val);
 void da9150_set_bits(struct da9150 *da9150, u16 reg, u8 mask, u8 val);

 void da9150_bulk_read(struct da9150 *da9150, u16 reg, int count, u8 *buf);
 void da9150_bulk_write(struct da9150 *da9150, u16 reg, int count, const u8 
*buf);
+
 #endif /* __DA9150_CORE_H */
diff --git a/include/linux/mfd/da9150/fg.h b/include/linux/mfd/da9150/fg.h
new file mode 100644
index 0000000..0ff52ab
--- /dev/null
+++ b/include/linux/mfd/da9150/fg.h
@@ -0,0 +1,29 @@
+/*
+ * DA9150 MFD Driver - Fuel Gauge Data
+ *
+ * Copyright (c) 2015 Dialog Semiconductor
+ *
+ * Author: Adam Thomson <adam.thomson.opensou...@diasemi.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __DA9150_FG_H
+#define __DA9150_FG_H
+
+#include <linux/power_supply.h>
+
+/* I2C sub-device address */
+#define DA9150_QIF_I2C_ADDR_LSB                0x5
+
+/* Platform data */
+struct da9150_fg_pdata {
+       u32 update_interval;    /* msecs */
+       u8 warn_soc_lvl;        /* % value */
+       u8 crit_soc_lvl;        /* % value */
+};
+
+#endif /* __DA9150_FG_H */
--
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to