On 8/23/05, Tomasz Chmielewski <[EMAIL PROTECTED]> wrote: > We are running almost 20 Fujitsu-Siemens Scenic machines, 2.6.8.1 > kernel, equipped with a onboard card that uses a tulip module: > > 02:01.0 Ethernet controller: Linksys NC100 Network Everywhere Fast > Ethernet 10/100 (rev 11) > > No problem with those. > > > We are running four more machines like that, the only difference is the > kernel they are running (2.6.11.4). > > On some of them, there are serious problems with a network, and they > usually happen when the traffic is bigger than usual (i.e., some big > software deployment to several workstations, remote backup, etc.). > > The syslog is then full of entries like that: > > Aug 21 04:04:30 SERVER-B-HS kernel: NETDEV WATCHDOG: eth0: transmit > timed out > Aug 21 04:04:30 SERVER-B-HS kernel: 0000:00:06.0: tulip_stop_rxtx() failed
I am seeing thousands of tulip_stop_rxtx() failed messages as well with 2.6.11. No regular network failure though. See http://kerneltrap.org/mailarchive/1/message/110291/flat Cheers, Jerome - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
