Various PCI bus errors can be signaled by newer PCI controllers. The core error recovery routines are architecture dependent. This patch adds a recovery infrastructure for the PPC64 pSeries systems.
Signed-off-by: Linas Vepstas <[EMAIL PROTECTED]>
--
arch/ppc64/kernel/Makefile | 2
arch/ppc64/kernel/eeh.c | 543 +++++++++++++++++++++++++++++------------
arch/ppc64/kernel/eeh_driver.c | 361 +++++++++++++++++++++++++++
arch/ppc64/kernel/eeh_event.c | 116 ++++++++
arch/ppc64/kernel/eeh_event.h | 52 +++
arch/ppc64/kernel/rtas_pci.c | 5
include/asm-ppc64/eeh.h | 105 +++++--
include/asm-ppc64/prom.h | 10
include/asm-ppc64/rtas.h | 2
9 files changed, 1001 insertions(+), 195 deletions(-)
Index: linux-2.6.13-rc6-git9/arch/ppc64/kernel/eeh.c
===================================================================
--- linux-2.6.13-rc6-git9.orig/arch/ppc64/kernel/eeh.c 2005-08-19
12:52:31.000000000 -0500
+++ linux-2.6.13-rc6-git9/arch/ppc64/kernel/eeh.c 2005-08-23
16:53:05.000000000 -0500
@@ -1,32 +1,33 @@
/*
+ *
* eeh.c
* Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/bootmem.h>
+#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <linux/list.h>
-#include <linux/mm.h>
-#include <linux/notifier.h>
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/rbtree.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
+#include <asm/atomic.h>
#include <asm/eeh.h>
#include <asm/io.h>
#include <asm/machdep.h>
@@ -34,6 +35,7 @@
#include <asm/atomic.h>
#include <asm/systemcfg.h>
#include "pci.h"
+#include "eeh_event.h"
#undef DEBUG
@@ -49,8 +51,8 @@
* were "empty": all reads return 0xff's and all writes are silently
* ignored. EEH slot isolation events can be triggered by parity
* errors on the address or data busses (e.g. during posted writes),
- * which in turn might be caused by dust, vibration, humidity,
- * radioactivity or plain-old failed hardware.
+ * which in turn might be caused by low voltage on the bus, dust,
+ * vibration, humidity, radioactivity or plain-old failed hardware.
*
* Note, however, that one of the leading causes of EEH slot
* freeze events are buggy device drivers, buggy device microcode,
@@ -75,22 +77,13 @@
#define BUID_HI(buid) ((buid) >> 32)
#define BUID_LO(buid) ((buid) & 0xffffffff)
-/* EEH event workqueue setup. */
-static DEFINE_SPINLOCK(eeh_eventlist_lock);
-LIST_HEAD(eeh_eventlist);
-static void eeh_event_handler(void *);
-DECLARE_WORK(eeh_event_wq, eeh_event_handler, NULL);
-
-static struct notifier_block *eeh_notifier_chain;
-
/*
* If a device driver keeps reading an MMIO register in an interrupt
* handler after a slot isolation event has occurred, we assume it
* is broken and panic. This sets the threshold for how many read
* attempts we allow before panicking.
*/
-#define EEH_MAX_FAILS 1000
-static atomic_t eeh_fail_count;
+#define EEH_MAX_FAILS 100000
/* RTAS tokens */
static int ibm_set_eeh_option;
@@ -107,6 +100,10 @@
static int eeh_error_buf_size;
/* System monitoring statistics */
+static DEFINE_PER_CPU(unsigned long, no_device);
+static DEFINE_PER_CPU(unsigned long, no_dn);
+static DEFINE_PER_CPU(unsigned long, no_cfg_addr);
+static DEFINE_PER_CPU(unsigned long, ignored_check);
static DEFINE_PER_CPU(unsigned long, total_mmio_ffs);
static DEFINE_PER_CPU(unsigned long, false_positives);
static DEFINE_PER_CPU(unsigned long, ignored_failures);
@@ -224,9 +221,9 @@
while (*p) {
parent = *p;
piar = rb_entry(parent, struct pci_io_addr_range, rb_node);
- if (alo < piar->addr_lo) {
+ if (ahi < piar->addr_lo) {
p = &parent->rb_left;
- } else if (ahi > piar->addr_hi) {
+ } else if (alo > piar->addr_hi) {
p = &parent->rb_right;
} else {
if (dev != piar->pcidev ||
@@ -245,6 +242,11 @@
piar->pcidev = dev;
piar->flags = flags;
+#ifdef DEBUG
+ printk (KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n",
+ alo, ahi, pci_name (dev));
+#endif
+
rb_link_node(&piar->rb_node, parent, p);
rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
@@ -268,8 +270,8 @@
if (!(dn->eeh_mode & EEH_MODE_SUPPORTED) ||
dn->eeh_mode & EEH_MODE_NOCHECK) {
#ifdef DEBUG
- printk(KERN_INFO "PCI: skip building address cache for=%s\n",
- pci_name(dev));
+ printk(KERN_INFO "PCI: skip building address cache for=%s %s\n",
+ pci_name(dev), dn->type);
#endif
return;
}
@@ -368,8 +370,12 @@
*/
void __init pci_addr_cache_build(void)
{
+ struct device_node *dn;
struct pci_dev *dev = NULL;
+ if (!eeh_subsystem_enabled)
+ return;
+
spin_lock_init(&pci_io_addr_cache_root.piar_lock);
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
@@ -378,6 +384,17 @@
continue;
}
pci_addr_cache_insert_device(dev);
+
+ /* Save the BAR's; firmware doesn't restore these after EEH
reset */
+ dn = pci_device_to_OF_node(dev);
+ if (dn) {
+ int i;
+ for (i = 0; i < 16; i++)
+ pci_read_config_dword(dev, i * 4,
&dn->config_space[i]);
+
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ dn->eeh_is_bridge = 1;
+ }
}
#ifdef DEBUG
@@ -389,24 +406,32 @@
/* --------------------------------------------------------------- */
/* Above lies the PCI Address Cache. Below lies the EEH event infrastructure */
-/**
- * eeh_register_notifier - Register to find out about EEH events.
- * @nb: notifier block to callback on events
- */
-int eeh_register_notifier(struct notifier_block *nb)
+void eeh_slot_error_detail (struct device_node *dn, int severity)
{
- return notifier_chain_register(&eeh_notifier_chain, nb);
-}
+ unsigned long flags;
+ int rc;
-/**
- * eeh_unregister_notifier - Unregister to an EEH event notifier.
- * @nb: notifier block to callback on events
- */
-int eeh_unregister_notifier(struct notifier_block *nb)
-{
- return notifier_chain_unregister(&eeh_notifier_chain, nb);
+ if (!dn) return;
+
+ /* Log the error with the rtas logger */
+ spin_lock_irqsave(&slot_errbuf_lock, flags);
+ memset(slot_errbuf, 0, eeh_error_buf_size);
+
+ rc = rtas_call(ibm_slot_error_detail,
+ 8, 1, NULL, dn->eeh_config_addr,
+ BUID_HI(dn->phb->buid),
+ BUID_LO(dn->phb->buid), NULL, 0,
+ virt_to_phys(slot_errbuf),
+ eeh_error_buf_size,
+ severity);
+
+ if (rc == 0)
+ log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0);
+ spin_unlock_irqrestore(&slot_errbuf_lock, flags);
}
+EXPORT_SYMBOL(eeh_slot_error_detail);
+
/**
* read_slot_reset_state - Read the reset state of a device node's slot
* @dn: device node to read
@@ -421,6 +446,7 @@
outputs = 4;
} else {
token = ibm_read_slot_reset_state;
+ rets[2] = 0; /* fake PE Unavailable info */
outputs = 3;
}
@@ -429,75 +455,8 @@
}
/**
- * eeh_panic - call panic() for an eeh event that cannot be handled.
- * The philosophy of this routine is that it is better to panic and
- * halt the OS than it is to risk possible data corruption by
- * oblivious device drivers that don't know better.
- *
- * @dev pci device that had an eeh event
- * @reset_state current reset state of the device slot
- */
-static void eeh_panic(struct pci_dev *dev, int reset_state)
-{
- /*
- * XXX We should create a separate sysctl for this.
- *
- * Since the panic_on_oops sysctl is used to halt the system
- * in light of potential corruption, we can use it here.
- */
- if (panic_on_oops)
- panic("EEH: MMIO failure (%d) on device:%s\n", reset_state,
- pci_name(dev));
- else {
- __get_cpu_var(ignored_failures)++;
- printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on
device:%s\n",
- reset_state, pci_name(dev));
- }
-}
-
-/**
- * eeh_event_handler - dispatch EEH events. The detection of a frozen
- * slot can occur inside an interrupt, where it can be hard to do
- * anything about it. The goal of this routine is to pull these
- * detection events out of the context of the interrupt handler, and
- * re-dispatch them for processing at a later time in a normal context.
- *
- * @dummy - unused
- */
-static void eeh_event_handler(void *dummy)
-{
- unsigned long flags;
- struct eeh_event *event;
-
- while (1) {
- spin_lock_irqsave(&eeh_eventlist_lock, flags);
- event = NULL;
- if (!list_empty(&eeh_eventlist)) {
- event = list_entry(eeh_eventlist.next, struct
eeh_event, list);
- list_del(&event->list);
- }
- spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
- if (event == NULL)
- break;
-
- printk(KERN_INFO "EEH: MMIO failure (%d), notifiying device "
- "%s\n", event->reset_state,
- pci_name(event->dev));
-
- atomic_set(&eeh_fail_count, 0);
- notifier_call_chain (&eeh_notifier_chain,
- EEH_NOTIFY_FREEZE, event);
-
- __get_cpu_var(slot_resets)++;
-
- pci_dev_put(event->dev);
- kfree(event);
- }
-}
-
-/**
- * eeh_token_to_phys - convert EEH address token to phys address
- * @token i/o token, should be address in the form 0xE....
+ * eeh_token_to_phys - convert I/O address to phys address
+ * @token i/o token, should be address in the form 0xA....
*/
static inline unsigned long eeh_token_to_phys(unsigned long token)
{
@@ -512,6 +471,39 @@
return pa | (token & (PAGE_SIZE-1));
}
+/** Mark all devices that are peers of this device as failed.
+ * Mark the device driver too, so that it can see the failure
+ * immediately; this is critical, since some drivers poll
+ * status registers in interrupts ... If a driver is polling,
+ * and the slot is frozen, then the driver can deadlock in
+ * an interrupt context, which is bad.
+ */
+static inline void eeh_mark_slot (struct device_node *dn)
+{
+ while (dn) {
+ dn->eeh_mode |= EEH_MODE_ISOLATED;
+
+ /* Mark the pci device driver too */
+ struct pci_dev *dev = dn->pcidev;
+ if (dev && dev->driver) {
+ dev->error_state = pci_channel_io_frozen;
+ }
+ if (dn->child)
+ eeh_mark_slot (dn->child);
+ dn = dn->sibling;
+ }
+}
+
+static inline void eeh_clear_slot (struct device_node *dn)
+{
+ while (dn) {
+ dn->eeh_mode &= ~(EEH_MODE_RECOVERING|EEH_MODE_ISOLATED);
+ if (dn->child)
+ eeh_clear_slot (dn->child);
+ dn = dn->sibling;
+ }
+}
+
/**
* eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze
* @dn device node
@@ -527,29 +519,37 @@
*
* It is safe to call this routine in an interrupt context.
*/
+extern void disable_irq_nosync(unsigned int);
+
int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
{
int ret;
int rets[3];
- unsigned long flags;
- int rc, reset_state;
- struct eeh_event *event;
+ enum pci_channel_state state;
__get_cpu_var(total_mmio_ffs)++;
if (!eeh_subsystem_enabled)
return 0;
- if (!dn)
+ if (!dn) {
+ __get_cpu_var(no_dn)++;
return 0;
+ }
/* Access to IO BARs might get this far and still not want checking. */
if (!(dn->eeh_mode & EEH_MODE_SUPPORTED) ||
dn->eeh_mode & EEH_MODE_NOCHECK) {
+ __get_cpu_var(ignored_check)++;
+#ifdef DEBUG
+ printk ("EEH:ignored check for %s %s\n",
+ pci_name (dev), dn->full_name);
+#endif
return 0;
}
if (!dn->eeh_config_addr) {
+ __get_cpu_var(no_cfg_addr)++;
return 0;
}
@@ -558,12 +558,18 @@
* slot, we know it's bad already, we don't need to check...
*/
if (dn->eeh_mode & EEH_MODE_ISOLATED) {
- atomic_inc(&eeh_fail_count);
- if (atomic_read(&eeh_fail_count) >= EEH_MAX_FAILS) {
+ dn->eeh_check_count ++;
+ if (dn->eeh_check_count >= EEH_MAX_FAILS) {
+ printk (KERN_ERR "EEH: Device driver ignored %d bad
reads, panicing\n",
+ dn->eeh_check_count);
+ dump_stack();
/* re-read the slot reset state */
if (read_slot_reset_state(dn, rets) != 0)
rets[0] = -1; /* reset state unknown */
- eeh_panic(dev, rets[0]);
+
+ /* If we are here, then we hit an infinite loop. Stop.
*/
+ panic("EEH: MMIO halt (%d) on device:%s\n", rets[0],
+ pci_name(dev));
}
return 0;
}
@@ -576,53 +582,36 @@
* In any case they must share a common PHB.
*/
ret = read_slot_reset_state(dn, rets);
- if (!(ret == 0 && rets[1] == 1 && (rets[0] == 2 || rets[0] == 4))) {
+ if (!(ret == 0 && ((rets[1] == 1 && (rets[0] == 2 || rets[0] >= 4))
+ || (rets[0] == 5)))) {
__get_cpu_var(false_positives)++;
return 0;
}
- /* prevent repeated reports of this failure */
- dn->eeh_mode |= EEH_MODE_ISOLATED;
-
- reset_state = rets[0];
-
- spin_lock_irqsave(&slot_errbuf_lock, flags);
- memset(slot_errbuf, 0, eeh_error_buf_size);
-
- rc = rtas_call(ibm_slot_error_detail,
- 8, 1, NULL, dn->eeh_config_addr,
- BUID_HI(dn->phb->buid),
- BUID_LO(dn->phb->buid), NULL, 0,
- virt_to_phys(slot_errbuf),
- eeh_error_buf_size,
- 1 /* Temporary Error */);
+ /* Note that empty slots will fail; empty slots don't have children...
*/
+ if ((rets[0] == 5) && (dn->child == NULL)) {
+ __get_cpu_var(false_positives)++;
+ return 0;
+ }
- if (rc == 0)
- log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0);
- spin_unlock_irqrestore(&slot_errbuf_lock, flags);
+ /* Avoid repeated reports of this failure, including problems
+ * with other functions on this device, and functions under
+ * bridges. */
+ eeh_mark_slot (dn->parent->child);
+ __get_cpu_var(slot_resets)++;
+
+ state = pci_channel_io_normal;
+ if ((rets[0] == 2) || (rets[0] == 4))
+ state = pci_channel_io_frozen;
+ if (rets[0] == 5)
+ state = pci_channel_io_perm_failure;
- printk(KERN_INFO "EEH: MMIO failure (%d) on device: %s %s\n",
- rets[0], dn->name, dn->full_name);
- event = kmalloc(sizeof(*event), GFP_ATOMIC);
- if (event == NULL) {
- eeh_panic(dev, reset_state);
- return 1;
- }
-
- event->dev = dev;
- event->dn = dn;
- event->reset_state = reset_state;
-
- /* We may or may not be called in an interrupt context */
- spin_lock_irqsave(&eeh_eventlist_lock, flags);
- list_add(&event->list, &eeh_eventlist);
- spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+ eeh_send_failure_event (dn, dev, state, rets[2]);
/* Most EEH events are due to device driver bugs. Having
* a stack trace will help the device-driver authors figure
* out what happened. So print that out. */
- dump_stack();
- schedule_work(&eeh_event_wq);
+ if (rets[0] != 5) dump_stack();
return 0;
}
@@ -634,7 +623,6 @@
* @token i/o token, should be address in the form 0xA....
* @val value, should be all 1's (XXX why do we need this arg??)
*
- * Check for an eeh failure at the given token address.
* Check for an EEH failure at the given token address. Call this
* routine if the result of a read was all 0xff's and you want to
* find out if this is due to an EEH slot freeze event. This routine
@@ -651,8 +639,10 @@
/* Finding the phys addr + pci device; this is pretty quick. */
addr = eeh_token_to_phys((unsigned long __force) token);
dev = pci_get_device_by_addr(addr);
- if (!dev)
+ if (!dev) {
+ __get_cpu_var(no_device)++;
return val;
+ }
dn = pci_device_to_OF_node(dev);
eeh_dn_check_failure (dn, dev);
@@ -663,6 +653,209 @@
EXPORT_SYMBOL(eeh_check_failure);
+/* ------------------------------------------------------------- */
+/* The code below deals with error recovery */
+
+/** eeh_pci_slot_reset -- raises/lowers the pci #RST line
+ * state: 1/0 to raise/lower the #RST
+ */
+void
+eeh_pci_slot_reset(struct pci_dev *dev, int state)
+{
+ struct device_node *dn = pci_device_to_OF_node(dev);
+ rtas_pci_slot_reset (dn, state);
+}
+
+/** Return negative value if a permanent error, else return
+ * a number of milliseconds to wait until the PCI slot is
+ * ready to be used.
+ */
+static int
+eeh_slot_availability(struct device_node *dn)
+{
+ int rc;
+ int rets[3];
+
+ rc = read_slot_reset_state(dn, rets);
+
+ if (rc) return rc;
+
+ if (rets[1] == 0) return -1; /* EEH is not supported */
+ if (rets[0] == 0) return 0; /* Oll Korrect */
+ if (rets[0] == 5) {
+ if (rets[2] == 0) return -1; /* permanently unavailable */
+ return rets[2]; /* number of millisecs to wait */
+ }
+ return -1;
+}
+
+int
+eeh_pci_slot_availability(struct pci_dev *dev)
+{
+ struct device_node *dn = pci_device_to_OF_node(dev);
+ if (!dn) return -1;
+
+ BUG_ON (dn->phb==NULL);
+ if (dn->phb==NULL) {
+ printk (KERN_ERR "EEH, checking on slot with no phb dn=%s
dev=%s\n",
+ dn->full_name, pci_name(dev));
+ return -1;
+ }
+ return eeh_slot_availability (dn);
+}
+
+void
+rtas_pci_slot_reset(struct device_node *dn, int state)
+{
+ int rc;
+
+ if (!dn)
+ return;
+ if (!dn->phb) {
+ printk (KERN_WARNING "EEH: in slot reset, device node %s has no
phb\n", dn->full_name);
+ return;
+ }
+
+ dn->eeh_mode |= EEH_MODE_RECOVERING;
+ rc = rtas_call(ibm_set_slot_reset,4,1, NULL,
+ dn->eeh_config_addr,
+ BUID_HI(dn->phb->buid),
+ BUID_LO(dn->phb->buid),
+ state);
+ if (rc) {
+ printk (KERN_WARNING "EEH: Unable to reset the failed slot,
(%d) #RST=%d\n", rc, state);
+ return;
+ }
+
+ if (state == 0)
+ eeh_clear_slot (dn->parent->child);
+}
+
+/** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
+ * dn -- device node to be reset.
+ */
+
+void
+rtas_set_slot_reset(struct device_node *dn)
+{
+ int i, rc;
+
+ rtas_pci_slot_reset (dn, 1);
+
+ /* The PCI bus requires that the reset be held high for at least
+ * a 100 milliseconds. We wait a bit longer 'just in case'. */
+
+#define PCI_BUS_RST_HOLD_TIME_MSEC 250
+ msleep (PCI_BUS_RST_HOLD_TIME_MSEC);
+ rtas_pci_slot_reset (dn, 0);
+
+ /* After a PCI slot has been reset, the PCI Express spec requires
+ * a 1.5 second idle time for the bus to stabilize, before starting
+ * up traffic. */
+#define PCI_BUS_SETTLE_TIME_MSEC 1800
+ msleep (PCI_BUS_SETTLE_TIME_MSEC);
+
+ /* Now double check with the firmware to make sure the device is
+ * ready to be used; if not, wait for recovery. */
+ for (i=0; i<10; i++) {
+ rc = eeh_slot_availability (dn);
+ if (rc <= 0) break;
+
+ msleep (rc+100);
+ }
+}
+
+EXPORT_SYMBOL(rtas_set_slot_reset);
+
+void
+rtas_configure_bridge(struct device_node *dn)
+{
+ int token = rtas_token ("ibm,configure-bridge");
+ int rc;
+
+ if (token == RTAS_UNKNOWN_SERVICE)
+ return;
+ rc = rtas_call(token,3,1, NULL,
+ dn->eeh_config_addr,
+ BUID_HI(dn->phb->buid),
+ BUID_LO(dn->phb->buid));
+ if (rc) {
+ printk (KERN_WARNING "EEH: Unable to configure device bridge
(%d) for %s\n",
+ rc, dn->full_name);
+ }
+}
+
+EXPORT_SYMBOL(rtas_configure_bridge);
+
+/* ------------------------------------------------------- */
+/** Save and restore of PCI BARs
+ *
+ * Although firmware will set up BARs during boot, it doesn't
+ * set up device BAR's after a device reset, although it will,
+ * if requested, set up bridge configuration. Thus, we need to
+ * configure the PCI devices ourselves. Config-space setup is
+ * stored in the PCI structures which are normally deleted during
+ * device removal. Thus, the "save" routine references the
+ * structures so that they aren't deleted.
+ */
+
+/**
+ * __restore_bars - Restore the Base Address Registers
+ * Loads the PCI configuration space base address registers,
+ * the expansion ROM base address, the latency timer, and etc.
+ * from the saved values in the device node.
+ */
+static inline void __restore_bars (struct device_node *dn)
+{
+ int i;
+
+ if (NULL==dn->phb) return;
+ for (i=4; i<10; i++) {
+ rtas_write_config(dn, i*4, 4, dn->config_space[i]);
+ }
+
+ /* 12 == Expansion ROM Address */
+ rtas_write_config(dn, 12*4, 4, dn->config_space[12]);
+
+#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
+#define SAVED_BYTE(OFF) (((u8 *)(dn->config_space))[BYTE_SWAP(OFF)])
+
+ rtas_write_config (dn, PCI_CACHE_LINE_SIZE, 1,
+ SAVED_BYTE(PCI_CACHE_LINE_SIZE));
+
+ rtas_write_config (dn, PCI_LATENCY_TIMER, 1,
+ SAVED_BYTE(PCI_LATENCY_TIMER));
+
+ /* max latency, min grant, interrupt pin and line */
+ rtas_write_config(dn, 15*4, 4, dn->config_space[15]);
+}
+
+/**
+ * eeh_restore_bars - restore the PCI config space info
+ */
+void eeh_restore_bars(struct device_node *dn)
+{
+ if (! dn->eeh_is_bridge)
+ __restore_bars (dn);
+
+ if (dn->child)
+ eeh_restore_bars (dn->child);
+}
+
+void eeh_pci_restore_bars(struct pci_dev *dev)
+{
+ struct device_node *dn = pci_device_to_OF_node(dev);
+ eeh_restore_bars (dn);
+}
+
+/* ------------------------------------------------------------- */
+/* The code below deals with enabling EEH for devices during the
+ * early boot sequence. EEH must be enabled before any PCI probing
+ * can be done.
+ */
+
+#define EEH_ENABLE 1
+
struct eeh_early_enable_info {
unsigned int buid_hi;
unsigned int buid_lo;
@@ -681,6 +874,8 @@
int enable;
dn->eeh_mode = 0;
+ dn->eeh_check_count = 0;
+ dn->eeh_freeze_count = 0;
if (status && strcmp(status, "ok") != 0)
return NULL; /* ignore devices with bad status */
@@ -704,8 +899,10 @@
* But there are a few cases like display devices that make sense.
*/
enable = 1; /* i.e. we will do checking */
+#if 0
if ((*class_code >> 16) == PCI_BASE_CLASS_DISPLAY)
enable = 0;
+#endif
if (!enable)
dn->eeh_mode |= EEH_MODE_NOCHECK;
@@ -742,7 +939,7 @@
dn->full_name);
}
- return NULL;
+ return NULL;
}
/*
@@ -827,7 +1024,9 @@
return;
phb = dn->phb;
if (NULL == phb || 0 == phb->buid) {
- printk(KERN_WARNING "EEH: Expected buid but found none\n");
+ printk(KERN_WARNING "EEH: Expected buid but found none for
%s\n",
+ dn->full_name);
+ dump_stack();
return;
}
@@ -846,6 +1045,9 @@
*/
void eeh_add_device_late(struct pci_dev *dev)
{
+ int i;
+ struct device_node *dn;
+
if (!dev || !eeh_subsystem_enabled)
return;
@@ -854,6 +1056,17 @@
#endif
pci_addr_cache_insert_device (dev);
+
+ /* Save the BAR's; firmware doesn't restore these after EEH reset */
+ dn = pci_device_to_OF_node(dev);
+ for (i = 0; i < 16; i++)
+ pci_read_config_dword(dev, i * 4, &dn->config_space[i]);
+
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ dn->eeh_is_bridge = 1;
+
+ pci_dev_get (dev);
+ dn->pcidev = dev;
}
EXPORT_SYMBOL(eeh_add_device_late);
@@ -866,6 +1079,7 @@
*/
void eeh_remove_device(struct pci_dev *dev)
{
+ struct device_node *dn;
if (!dev || !eeh_subsystem_enabled)
return;
@@ -874,6 +1088,10 @@
printk(KERN_DEBUG "EEH: remove device %s\n", pci_name(dev));
#endif
pci_addr_cache_remove_device(dev);
+
+ dn = pci_device_to_OF_node(dev);
+ dn->pcidev = NULL;
+ pci_dev_put (dev);
}
EXPORT_SYMBOL(eeh_remove_device);
@@ -882,12 +1100,17 @@
unsigned int cpu;
unsigned long ffs = 0, positives = 0, failures = 0;
unsigned long resets = 0;
+ unsigned long no_dev = 0, no_dn = 0, no_cfg = 0, no_check = 0;
for_each_cpu(cpu) {
ffs += per_cpu(total_mmio_ffs, cpu);
positives += per_cpu(false_positives, cpu);
failures += per_cpu(ignored_failures, cpu);
resets += per_cpu(slot_resets, cpu);
+ no_dev += per_cpu(no_device, cpu);
+ no_dn += per_cpu(no_dn, cpu);
+ no_cfg += per_cpu(no_cfg_addr, cpu);
+ no_check += per_cpu(ignored_check, cpu);
}
if (0 == eeh_subsystem_enabled) {
@@ -895,13 +1118,17 @@
seq_printf(m, "eeh_total_mmio_ffs=%ld\n", ffs);
} else {
seq_printf(m, "EEH Subsystem is enabled\n");
- seq_printf(m, "eeh_total_mmio_ffs=%ld\n"
+ seq_printf(m,
+ "no device=%ld\n"
+ "no device node=%ld\n"
+ "no config address=%ld\n"
+ "check not wanted=%ld\n"
+ "eeh_total_mmio_ffs=%ld\n"
"eeh_false_positives=%ld\n"
"eeh_ignored_failures=%ld\n"
- "eeh_slot_resets=%ld\n"
- "eeh_fail_count=%d\n",
- ffs, positives, failures, resets,
- eeh_fail_count.counter);
+ "eeh_slot_resets=%ld\n",
+ no_dev, no_dn, no_cfg, no_check,
+ ffs, positives, failures, resets);
}
return 0;
Index: linux-2.6.13-rc6-git9/arch/ppc64/kernel/eeh_driver.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.13-rc6-git9/arch/ppc64/kernel/eeh_driver.c 2005-08-23
14:34:44.000000000 -0500
@@ -0,0 +1,361 @@
+/*
+ * PCI Hot Plug Controller Driver for RPA-compliant PPC64 platform.
+ * Copyright (C) 2004, 2005 Linas Vepstas <[EMAIL PROTECTED]>
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <[EMAIL PROTECTED]>
+ *
+ */
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/pci.h>
+#include <asm/eeh.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+
+#include "eeh_event.h"
+#include "../../../drivers/pci/pci.h"
+#include "../../../drivers/pci/hotplug/rpaphp.h"
+
+/**
+ * pci_search_bus_for_dev - return 1 if device is under this bus, else 0
+ * @bus: the bus to search for this device.
+ * @dev: the pci device we are looking for.
+ *
+ * XXX should this be moved to drivers/pci/search.c ?
+ */
+static int pci_search_bus_for_dev (struct pci_bus *bus, struct pci_dev *dev)
+{
+ struct list_head *ln;
+
+ if (!bus) return 0;
+
+ for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
+ struct pci_dev *pdev = pci_dev_b(ln);
+ if (pdev == dev)
+ return 1;
+ if (pdev->subordinate) {
+ int rc;
+ rc = pci_search_bus_for_dev (pdev->subordinate, dev);
+ if (rc)
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/**
+ * rpaphp_find_slot - find and return the slot holding the device
+ * @dev: pci device for which we want the slot structure.
+ */
+static struct slot *rpaphp_find_slot(struct pci_dev *dev)
+{
+ struct list_head *tmp, *n;
+ struct slot *slot;
+
+ list_for_each_safe(tmp, n, &rpaphp_slot_head) {
+ struct pci_bus *bus;
+
+ slot = list_entry(tmp, struct slot, rpaphp_slot_list);
+
+ /* PHB's don't have bridges. */
+ bus = slot->bus;
+ if (bus == NULL)
+ continue;
+
+ /* The PCI device could be the slot itself. */
+ if (bus->self == dev)
+ return slot;
+
+ if (pci_search_bus_for_dev (bus, dev))
+ return slot;
+ }
+ return NULL;
+}
+
+struct hotplug_slot *pci_hp_find_slot(struct pci_dev *dev)
+{
+ struct slot *slot = rpaphp_find_slot(dev);
+ if (slot)
+ return slot->hotplug_slot;
+ return NULL;
+}
+
+/* ------------------------------------------------------- */
+/** eeh_report_error - report an EEH error to each device,
+ * collect up and merge the device responses.
+ */
+
+static void eeh_report_error(struct pci_dev *dev, void *userdata)
+{
+ enum pcierr_result rc, *res = userdata;
+ struct pci_driver *driver = dev->driver;
+
+ dev->error_state = pci_channel_io_frozen;
+
+ if (!driver)
+ return;
+ if (!driver->err_handler)
+ return;
+ if (!driver->err_handler->error_detected)
+ return;
+
+ rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen);
+ if (*res == PCIERR_RESULT_NONE) *res = rc;
+ if (*res == PCIERR_RESULT_NEED_RESET) return;
+ if (*res == PCIERR_RESULT_DISCONNECT &&
+ rc == PCIERR_RESULT_NEED_RESET) *res = rc;
+}
+
+/** eeh_report_reset -- tell this device that the pci slot
+ * has been reset.
+ */
+
+static void eeh_report_reset(struct pci_dev *dev, void *userdata)
+{
+ struct pci_driver *driver = dev->driver;
+
+ if (!driver)
+ return;
+ if (!driver->err_handler)
+ return;
+ if (!driver->err_handler->slot_reset)
+ return;
+
+ driver->err_handler->slot_reset (dev);
+}
+
+static void eeh_report_resume(struct pci_dev *dev, void *userdata)
+{
+ struct pci_driver *driver = dev->driver;
+
+ dev->error_state = pci_channel_io_normal;
+
+ if (!driver)
+ return;
+ if (!driver->err_handler)
+ return;
+ if (!driver->err_handler->resume)
+ return;
+
+ driver->err_handler->resume (dev);
+}
+
+static void eeh_report_failure(struct pci_dev *dev, void *userdata)
+{
+ struct pci_driver *driver = dev->driver;
+
+ dev->error_state = pci_channel_io_perm_failure;
+
+ if (!driver)
+ return;
+ if (!driver->err_handler)
+ return;
+ if (!driver->err_handler->error_detected)
+ return;
+ driver->err_handler->error_detected (dev, pci_channel_io_perm_failure);
+}
+
+/* ------------------------------------------------------- */
+/**
+ * handle_eeh_events -- reset a PCI device after hard lockup.
+ *
+ * pSeries systems will isolate a PCI slot if the PCI-Host
+ * bridge detects address or data parity errors, DMA's
+ * occuring to wild addresses (which usually happen due to
+ * bugs in device drivers or in PCI adapter firmware).
+ * Slot isolations also occur if #SERR, #PERR or other misc
+ * PCI-related errors are detected.
+ *
+ * Recovery process consists of unplugging the device driver
+ * (which generated hotplug events to userspace), then issuing
+ * a PCI #RST to the device, then reconfiguring the PCI config
+ * space for all bridges & devices under this slot, and then
+ * finally restarting the device drivers (which cause a second
+ * set of hotplug events to go out to userspace).
+ */
+
+int eeh_reset_device (struct pci_dev *dev, struct device_node *dn, int
reconfig)
+{
+ struct hotplug_slot *frozen_slot= NULL;
+ struct hotplug_slot_ops *frozen_ops= NULL;
+
+ if (!dev)
+ return 1;
+
+ if (reconfig) {
+ frozen_slot = pci_hp_find_slot(dev);
+ if (frozen_slot)
+ frozen_ops = frozen_slot->ops;
+ }
+
+ if (frozen_ops) frozen_ops->disable_slot (frozen_slot);
+
+ /* Reset the pci controller. (Asserts RST#; resets config space).
+ * Reconfigure bridges and devices */
+ rtas_set_slot_reset (dn->child);
+
+ /* Walk over all functions on this device */
+ struct device_node *peer = dn->child;
+ while (peer) {
+ rtas_configure_bridge(peer);
+ eeh_restore_bars(peer);
+ peer = peer->sibling;
+ }
+
+ /* Give the system 5 seconds to finish running the user-space
+ * hotplug scripts, e.g. ifdown for ethernet. Yes, this is a hack,
+ * but if we don't do this, weird things happen.
+ */
+ if (frozen_ops) {
+ ssleep (5);
+ frozen_ops->enable_slot (frozen_slot);
+ }
+ return 0;
+}
+
+/* The longest amount of time to wait for a pci device
+ * to come back on line, in seconds.
+ */
+#define MAX_WAIT_FOR_RECOVERY 15
+
+int handle_eeh_events (struct eeh_event *event)
+{
+ int freeze_count=0;
+ struct device_node *frozen_device;
+ struct pci_dev *dev = event->dev;
+ int perm_failure = 0;
+
+ /* We might not have a pci device, if it was a config space read
+ * that failed. Find the pci device now. */
+ if (!dev)
+ dev = event->dn->pcidev;
+ if (!dev)
+ {
+ printk ("EEH: EEH error caught, but no PCI device found!\n");
+ return 1;
+ }
+
+ /* Some devices go crazy if irq's are not ack'ed; disable irq now */
+ disable_irq_nosync (dev->irq);
+
+ frozen_device = pci_bus_to_OF_node(dev->bus);
+ if (!frozen_device)
+ {
+ printk (KERN_ERR "EEH: Cannot find PCI controller for %s\n",
+ pci_name(dev));
+
+ return 1;
+ }
+ BUG_ON (frozen_device->phb==NULL);
+
+ /* We get "permanent failure" messages on empty slots.
+ * These are false alarms. Empty slots have no child dn. */
+ if ((event->state == pci_channel_io_perm_failure) && (frozen_device ==
NULL))
+ return 0;
+
+ if (frozen_device)
+ freeze_count = frozen_device->eeh_freeze_count;
+ freeze_count ++;
+ if (freeze_count > EEH_MAX_ALLOWED_FREEZES)
+ perm_failure = 1;
+
+ /* If the reset state is a '5' and the time to reset is 0 (infinity)
+ * or is more then 15 seconds, then mark this as a permanent failure.
+ */
+ if ((event->state == pci_channel_io_perm_failure) &&
+ ((event->time_unavail <= 0) ||
+ (event->time_unavail > MAX_WAIT_FOR_RECOVERY*1000)))
+ {
+ perm_failure = 1;
+ }
+
+ /* Log the error with the rtas logger. */
+ if (perm_failure) {
+ /*
+ * About 90% of all real-life EEH failures in the field
+ * are due to poorly seated PCI cards. Only 10% or so are
+ * due to actual, failed cards.
+ */
+ printk (KERN_ERR
+ "EEH: PCI device %s has failed %d times \n"
+ "and has been permanently disabled. Please try
reseating\n"
+ "this device or replacing it.\n",
+ pci_name (dev),
+ freeze_count);
+
+ eeh_slot_error_detail (frozen_device, 2 /* Permanent Error */);
+
+ /* Notify all devices that they're about to go down. */
+ pci_walk_bus (dev->bus, eeh_report_failure, 0);
+
+ /* If there's a hotplug slot, unconfigure it */
+ // XXX we need alternate way to deconfigure non-hotplug slots.
+ struct hotplug_slot * frozen_slot = pci_hp_find_slot(dev);
+ if (frozen_slot && frozen_slot->ops)
+ frozen_slot->ops->disable_slot (frozen_slot);
+ return 1;
+ } else {
+ eeh_slot_error_detail (frozen_device, 1 /* Temporary Error */);
+ }
+
+ printk (KERN_WARNING
+ "EEH: This PCI device has failed %d times since last reboot: %s\n",
+ freeze_count,
+ pci_name (dev));
+
+ /* Walk the various device drivers attached to this slot,
+ * letting each know about the EEH bug.
+ */
+ enum pcierr_result result = PCIERR_RESULT_NONE;
+ pci_walk_bus (dev->bus, eeh_report_error, &result);
+
+ /* If all device drivers were EEH-unaware, then pci hotplug
+ * the device, and hope that clears the error. */
+ if (result == PCIERR_RESULT_NONE) {
+ eeh_reset_device (dev, frozen_device, 1);
+ }
+
+ /* If any device called out for a reset, then reset the slot */
+ if (result == PCIERR_RESULT_NEED_RESET) {
+ eeh_reset_device (dev, frozen_device, 0);
+ pci_walk_bus (dev->bus, eeh_report_reset, 0);
+ }
+
+ /* If all devices reported they can proceed, the re-enable PIO */
+ if (result == PCIERR_RESULT_CAN_RECOVER) {
+ /* XXX Not supported; we brute-force reset the device */
+ eeh_reset_device (dev, frozen_device, 0);
+ pci_walk_bus (dev->bus, eeh_report_reset, 0);
+ }
+
+ /* Tell all device drivers that they can resume operations */
+ pci_walk_bus (dev->bus, eeh_report_resume, 0);
+
+ /* Store the freeze count with the pci adapter, and not the slot.
+ * This way, if the device is replaced, the count is cleared.
+ */
+ frozen_device->eeh_freeze_count = freeze_count;
+
+ return 1;
+}
+
+/* ---------- end of file ---------- */
Index: linux-2.6.13-rc6-git9/arch/ppc64/kernel/eeh_event.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.13-rc6-git9/arch/ppc64/kernel/eeh_event.c 2005-08-23
10:33:40.000000000 -0500
@@ -0,0 +1,116 @@
+/*
+ * eeh_event.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2005 Linas Vepstas <[EMAIL PROTECTED]>
+ */
+
+#include <linux/list.h>
+#include <linux/pci.h>
+#include "eeh_event.h"
+
+/** Overview:
+ * EEH error states may be detected within exception handlers;
+ * however, the recovery processing needs to occur asynchronously
+ * in a normal kernel context and not an interrupt context.
+ * This pair of routines creates an event and queues it onto a
+ * work-queue, where a worker thread can drive recovery.
+ */
+
+/* EEH event workqueue setup. */
+static spinlock_t eeh_eventlist_lock = SPIN_LOCK_UNLOCKED;
+LIST_HEAD(eeh_eventlist);
+static void eeh_event_handler(void *);
+DECLARE_WORK(eeh_event_wq, eeh_event_handler, NULL);
+
+int handle_eeh_events (struct eeh_event *event);
+
+/**
+ * eeh_event_handler - dispatch EEH events. The detection of a frozen
+ * slot can occur inside an interrupt, where it can be hard to do
+ * anything about it. The goal of this routine is to pull these
+ * detection events out of the context of the interrupt handler, and
+ * re-dispatch them for processing at a later time in a normal context.
+ *
+ * @dummy - unused
+ */
+static void eeh_event_handler(void *dummy)
+{
+ unsigned long flags;
+ struct eeh_event *event;
+
+ while (1) {
+ spin_lock_irqsave(&eeh_eventlist_lock, flags);
+ event = NULL;
+ if (!list_empty(&eeh_eventlist)) {
+ event = list_entry(eeh_eventlist.next, struct
eeh_event, list);
+ list_del(&event->list);
+ }
+ spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+ if (event == NULL)
+ break;
+
+ printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n",
+ pci_name(event->dev));
+
+ handle_eeh_events(event);
+
+ pci_dev_put(event->dev);
+ kfree(event);
+ }
+}
+
+/**
+ * eeh_send_failure_event - generate a PCI error event
+ * @dev pci device
+ *
+ * This routine can be called within an interrupt context;
+ * the actual event will be delivered in a normal context
+ * (from a workqueue).
+ */
+int eeh_send_failure_event (struct device_node *dn,
+ struct pci_dev *dev,
+ enum pci_channel_state state,
+ int time_unavail)
+{
+ unsigned long flags;
+ struct eeh_event *event;
+
+ event = kmalloc(sizeof(*event), GFP_ATOMIC);
+ if (event == NULL) {
+ printk (KERN_ERR "EEH: out of memory, event not handled\n");
+ return 1;
+ }
+
+ if (dev)
+ pci_dev_get(dev);
+
+ event->dn = dn;
+ event->dev = dev;
+ event->state = state;
+ event->time_unavail = time_unavail;
+
+ /* We may or may not be called in an interrupt context */
+ spin_lock_irqsave(&eeh_eventlist_lock, flags);
+ list_add(&event->list, &eeh_eventlist);
+ spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+
+ schedule_work(&eeh_event_wq);
+
+ return 0;
+}
+
+/********************** END OF FILE ******************************/
Index: linux-2.6.13-rc6-git9/arch/ppc64/kernel/eeh_event.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.13-rc6-git9/arch/ppc64/kernel/eeh_event.h 2005-08-19
15:52:59.000000000 -0500
@@ -0,0 +1,52 @@
+/*
+ * eeh_event.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2005 Linas Vepstas <[EMAIL PROTECTED]>
+ */
+
+#ifndef ASM_PPC64_EEH_EVENT_H
+#define ASM_PPC64_EEH_EVENT_H
+
+/** EEH event -- structure holding pci controller data that describes
+ * a change in the isolation status of a PCI slot. A pointer
+ * to this struct is passed as the data pointer in a notify callback.
+ */
+struct eeh_event {
+ struct list_head list;
+ struct device_node *dn; /* struct device node */
+ struct pci_dev *dev; /* affected device */
+ enum pci_channel_state state; /* PCI bus state for the affected device
*/
+ int time_unavail; /* milliseconds until device might be available */
+};
+
+/**
+ * eeh_send_failure_event - generate a PCI error event
+ * @dev pci device
+ *
+ * This routine builds a PCI error event which will be delivered
+ * to all listeners on the peh_notifier_chain.
+ *
+ * This routine can be called within an interrupt context;
+ * the actual event will be delivered in a normal context
+ * (from a workqueue).
+ */
+int eeh_send_failure_event (struct device_node *dn,
+ struct pci_dev *dev,
+ enum pci_channel_state state,
+ int time_unavail);
+
+#endif /* ASM_PPC64_EEH_EVENT_H */
Index: linux-2.6.13-rc6-git9/arch/ppc64/kernel/rtas_pci.c
===================================================================
--- linux-2.6.13-rc6-git9.orig/arch/ppc64/kernel/rtas_pci.c 2005-08-19
12:01:00.000000000 -0500
+++ linux-2.6.13-rc6-git9/arch/ppc64/kernel/rtas_pci.c 2005-08-23
14:37:20.000000000 -0500
@@ -58,7 +58,7 @@
return 0;
}
-static int rtas_read_config(struct device_node *dn, int where, int size, u32
*val)
+int rtas_read_config(struct device_node *dn, int where, int size, u32 *val)
{
int returnval = -1;
unsigned long buid, addr;
@@ -105,10 +105,11 @@
for (dn = busdn->child; dn; dn = dn->sibling)
if (dn->devfn == devfn)
return rtas_read_config(dn, where, size, val);
+
return PCIBIOS_DEVICE_NOT_FOUND;
}
-static int rtas_write_config(struct device_node *dn, int where, int size, u32
val)
+int rtas_write_config(struct device_node *dn, int where, int size, u32 val)
{
unsigned long buid, addr;
int ret;
Index: linux-2.6.13-rc6-git9/include/asm-ppc64/eeh.h
===================================================================
--- linux-2.6.13-rc6-git9.orig/include/asm-ppc64/eeh.h 2005-07-15
16:18:57.000000000 -0500
+++ linux-2.6.13-rc6-git9/include/asm-ppc64/eeh.h 2005-08-19
15:02:28.000000000 -0500
@@ -1,4 +1,4 @@
-/*
+/*
* eeh.h
* Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation.
*
@@ -6,12 +6,12 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
@@ -36,6 +36,11 @@
#define EEH_MODE_SUPPORTED (1<<0)
#define EEH_MODE_NOCHECK (1<<1)
#define EEH_MODE_ISOLATED (1<<2)
+#define EEH_MODE_RECOVERING (1<<3)
+
+/* Max number of EEH freezes allowed before we consider the device
+ * to be permanently disabled. */
+#define EEH_MAX_ALLOWED_FREEZES 5
void __init eeh_init(void);
unsigned long eeh_check_failure(const volatile void __iomem *token,
@@ -59,35 +64,71 @@
* eeh_remove_device - undo EEH setup for the indicated pci device
* @dev: pci device to be removed
*
- * This routine should be when a device is removed from a running
- * system (e.g. by hotplug or dlpar).
+ * This routine should be called when a device is removed from
+ * a running system (e.g. by hotplug or dlpar). It unregisters
+ * the PCI device from the EEH subsystem. I/O errors affecting
+ * this device will no longer be detected after this call; thus,
+ * i/o errors affecting this slot may leave this device unusable.
*/
void eeh_remove_device(struct pci_dev *);
-#define EEH_DISABLE 0
-#define EEH_ENABLE 1
-#define EEH_RELEASE_LOADSTORE 2
-#define EEH_RELEASE_DMA 3
+/**
+ * eeh_slot_error_detail -- record and EEH error condition to the log
+ * @severity: 1 if temporary, 2 if permanent failure.
+ *
+ * Obtains the the EEH error details from the RTAS subsystem,
+ * and then logs these details with the RTAS error log system.
+ */
+void eeh_slot_error_detail (struct device_node *dn, int severity);
/**
- * Notifier event flags.
+ * rtas_set_slot_reset -- unfreeze a frozen slot
+ *
+ * Clear the EEH-frozen condition on a slot. This routine
+ * does this by asserting the PCI #RST line for 1/8th of
+ * a second; this routine will sleep while the adapter is
+ * being reset.
*/
-#define EEH_NOTIFY_FREEZE 1
+void rtas_set_slot_reset (struct device_node *dn);
-/** EEH event -- structure holding pci slot data that describes
- * a change in the isolation status of a PCI slot. A pointer
- * to this struct is passed as the data pointer in a notify callback.
- */
-struct eeh_event {
- struct list_head list;
- struct pci_dev *dev;
- struct device_node *dn;
- int reset_state;
-};
-
-/** Register to find out about EEH events. */
-int eeh_register_notifier(struct notifier_block *nb);
-int eeh_unregister_notifier(struct notifier_block *nb);
+/** rtas_pci_slot_reset raises/lowers the pci #RST line
+ * state: 1/0 to raise/lower the #RST
+ *
+ * Clear the EEH-frozen condition on a slot. This routine
+ * asserts the PCI #RST line if the 'state' argument is '1',
+ * and drops the #RST line if 'state is '0'. This routine is
+ * safe to call in an interrupt context.
+ *
+ */
+void rtas_pci_slot_reset(struct device_node *dn, int state);
+void eeh_pci_slot_reset(struct pci_dev *dev, int state);
+
+/** eeh_pci_slot_availability -- Indicates whether a PCI
+ * slot is ready to be used. After a PCI reset, it may take a while
+ * for the PCI fabric to fully reset the comminucations path to the
+ * given PCI card. This routine can be used to determine how long
+ * to wait before a PCI slot might become usable.
+ *
+ * This routine returns how long to wait (in milliseconds) before
+ * the slot is expected to be usable. A value of zero means the
+ * slot is immediately usable. A negavitve value means that the
+ * slot is permanently disabled.
+ */
+int eeh_pci_slot_availability(struct pci_dev *dev);
+
+/** Restore device configuration info across device resets.
+ */
+void eeh_restore_bars(struct device_node *);
+void eeh_pci_restore_bars(struct pci_dev *dev);
+
+/**
+ * rtas_configure_bridge -- firmware initialization of pci bridge
+ *
+ * Ask the firmware to configure any PCI bridge devices
+ * located behind the indicated node. Required after a
+ * pci device reset.
+ */
+void rtas_configure_bridge(struct device_node *dn);
/**
* EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
@@ -129,7 +170,7 @@
#define EEH_IO_ERROR_VALUE(size) (-1UL)
#endif /* CONFIG_EEH */
-/*
+/*
* MMIO read/write operations with EEH support.
*/
static inline u8 eeh_readb(const volatile void __iomem *addr)
@@ -251,21 +292,21 @@
*((u8 *)dest) = *((volatile u8 *)vsrc);
__asm__ __volatile__ ("eieio" : : : "memory");
vsrc = (void *)((unsigned long)vsrc + 1);
- dest = (void *)((unsigned long)dest + 1);
+ dest = (void *)((unsigned long)dest + 1);
n--;
}
while(n > 4) {
*((u32 *)dest) = *((volatile u32 *)vsrc);
__asm__ __volatile__ ("eieio" : : : "memory");
vsrc = (void *)((unsigned long)vsrc + 4);
- dest = (void *)((unsigned long)dest + 4);
+ dest = (void *)((unsigned long)dest + 4);
n -= 4;
}
while(n) {
*((u8 *)dest) = *((volatile u8 *)vsrc);
__asm__ __volatile__ ("eieio" : : : "memory");
vsrc = (void *)((unsigned long)vsrc + 1);
- dest = (void *)((unsigned long)dest + 1);
+ dest = (void *)((unsigned long)dest + 1);
n--;
}
__asm__ __volatile__ ("sync" : : : "memory");
@@ -287,19 +328,19 @@
while(n && (!EEH_CHECK_ALIGN(vdest, 4) || !EEH_CHECK_ALIGN(src, 4))) {
*((volatile u8 *)vdest) = *((u8 *)src);
src = (void *)((unsigned long)src + 1);
- vdest = (void *)((unsigned long)vdest + 1);
+ vdest = (void *)((unsigned long)vdest + 1);
n--;
}
while(n > 4) {
*((volatile u32 *)vdest) = *((volatile u32 *)src);
src = (void *)((unsigned long)src + 4);
- vdest = (void *)((unsigned long)vdest + 4);
+ vdest = (void *)((unsigned long)vdest + 4);
n-=4;
}
while(n) {
*((volatile u8 *)vdest) = *((u8 *)src);
src = (void *)((unsigned long)src + 1);
- vdest = (void *)((unsigned long)vdest + 1);
+ vdest = (void *)((unsigned long)vdest + 1);
n--;
}
__asm__ __volatile__ ("sync" : : : "memory");
Index: linux-2.6.13-rc6-git9/include/asm-ppc64/rtas.h
===================================================================
--- linux-2.6.13-rc6-git9.orig/include/asm-ppc64/rtas.h 2005-08-17
15:17:44.000000000 -0500
+++ linux-2.6.13-rc6-git9/include/asm-ppc64/rtas.h 2005-08-19
15:02:28.000000000 -0500
@@ -246,4 +246,6 @@
#define GLOBAL_INTERRUPT_QUEUE 9005
+extern int rtas_write_config(struct device_node *dn, int where, int size, u32
val);
+
#endif /* _PPC64_RTAS_H */
Index: linux-2.6.13-rc6-git9/include/asm-ppc64/prom.h
===================================================================
--- linux-2.6.13-rc6-git9.orig/include/asm-ppc64/prom.h 2005-08-19
15:11:39.000000000 -0500
+++ linux-2.6.13-rc6-git9/include/asm-ppc64/prom.h 2005-08-23
13:31:52.000000000 -0500
@@ -135,11 +135,17 @@
int busno; /* for pci devices */
int bussubno; /* for pci devices */
int devfn; /* for pci devices */
- int eeh_mode; /* See eeh.h for possible EEH_MODEs */
- int eeh_config_addr;
+ int eeh_mode; /* See eeh.h for possible EEH_MODEs */
+ int eeh_config_addr;
+ int eeh_check_count; /* number of times device driver ignored
error */
+ int eeh_freeze_count; /* number of times this device froze up. */
+ int eeh_is_bridge; /* device is pci-to-pci bridge */
+
int pci_ext_config_space; /* for pci devices */
struct pci_controller *phb; /* for pci devices */
struct iommu_table *iommu_table; /* for phb's or bridges */
+ struct pci_dev *pcidev; /* back-pointer to the pci device */
+ u32 config_space[16]; /* saved PCI config space */
struct property *properties;
struct device_node *parent;
Index: linux-2.6.13-rc6-git9/arch/ppc64/kernel/Makefile
===================================================================
--- linux-2.6.13-rc6-git9.orig/arch/ppc64/kernel/Makefile 2005-08-17
15:40:18.000000000 -0500
+++ linux-2.6.13-rc6-git9/arch/ppc64/kernel/Makefile 2005-08-19
15:54:26.000000000 -0500
@@ -37,7 +37,7 @@
bpa_iic.o spider-pic.o
obj-$(CONFIG_KEXEC) += machine_kexec.o
-obj-$(CONFIG_EEH) += eeh.o
+obj-$(CONFIG_EEH) += eeh.o eeh_driver.o eeh_event.o
obj-$(CONFIG_PROC_FS) += proc_ppc64.o
obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
obj-$(CONFIG_SMP) += smp.o
--
signature.asc
Description: Digital signature
