Hello all, I am a newbee tryinging for serial port multiplexing. Currently my driver supports for one port (/dev/ttyS0). However i want to use the same physical port for 2 virtual ports.I am NOT sending two type of data simultaneously. I want to first reigister my driver for /dev/ttyS0. When the kernel has booted ,i want to disable it. Then i want to enable the driver to register for say /dev/ttyS1. in short i don't want the console to have controle over the serial port. The point of doing such is that i want my serial port to be free. I can telnet to this potr from other machine and test few stuff. i hope i have properly mentioned my problem.
plz let me know how should i proceed. thanks in advance. regards, rahul ____________________________________________________ Send a rakhi to your brother, buy gifts and win attractive prizes. Log on to http://in.promos.yahoo.com/rakhi/index.html - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/