On Thu, Jul 16, 2015 at 10:29:13AM +0200, Joerg Roedel wrote:
> From: Joerg Roedel <jroe...@suse.de>
>
> The XR17V35X UART needs the ECB bit set in its XR_EFR
> register to enable access to IER [7:5], ISR [5:4], FCR[5:4],
> MCR[7:5], and MSR [7:0].
>
> Also reset the IER register to mask interrupts after access
> to all bits of this register has been enabled.
>
> This makes my 8-port XR17V35X working with the in-kernel
> serial driver.
>
> Cc: Peter Hurley <pe...@hurleysoftware.com>
> Cc: Michael Welling <mwell...@ieee.org>
> Cc: Joe Schultz <jschu...@xes-inc.com>
> Signed-off-by: Joerg Roedel <jroe...@suse.de>
> ---
> drivers/tty/serial/8250/8250_core.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/tty/serial/8250/8250_core.c
> b/drivers/tty/serial/8250/8250_core.c
> index 37fff12..4124a91 100644
> --- a/drivers/tty/serial/8250/8250_core.c
> +++ b/drivers/tty/serial/8250/8250_core.c
> @@ -2164,6 +2164,21 @@ int serial8250_do_startup(struct uart_port *port)
> */
> enable_rsa(up);
> #endif
> +
> + if (port->type == PORT_XR17V35X) {
> + /*
> + * First enable access to IER [7:5], ISR [5:4], FCR [5:4],
> + * MCR [7:5] and MSR [7:0]
> + */
> + serial_port_out(port, UART_XR_EFR, UART_EFR_ECB);
> +
> + /*
> + * Make sure all interrups are masked until initialization is
> + * complete and the FIFOs are cleared
> + */
> + serial_port_out(port, UART_IER, 0);
> + }
> +
Reviewed-by: Michael Welling <mwell...@ieee.org>
> /*
> * Clear the FIFO buffers and disable them.
> * (they will be reenabled in set_termios())
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
