The patch regulator: Remove the max77843 driver
has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 2a32b401a11fc48193e58b0a5af6ea82de0272de Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski <[email protected]> Date: Wed, 15 Jul 2015 21:59:55 +0900 Subject: [PATCH] regulator: Remove the max77843 driver The max77693 regulator driver supports Maxim 77843 device so remove the max77843 driver. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Mark Brown <[email protected]> --- drivers/regulator/Kconfig | 8 -- drivers/regulator/Makefile | 1 - drivers/regulator/max77843.c | 203 ------------------------------------------- 3 files changed, 212 deletions(-) delete mode 100644 drivers/regulator/max77843.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index b1022c2..ed5ac9e 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -424,14 +424,6 @@ config REGULATOR_MAX77802 Exynos5420/Exynos5800 SoCs to control various voltages. It includes support for control of voltage and ramp speed. -config REGULATOR_MAX77843 - tristate "Maxim 77843 regulator" - depends on MFD_MAX77843 - help - This driver controls a Maxim 77843 regulator. - The regulator include two 'SAFEOUT' for USB(Universal Serial Bus) - This is suitable for Exynos5433 SoC chips. - config REGULATOR_MC13XXX_CORE tristate diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 91bf762..6429e62 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -56,7 +56,6 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o -obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c deleted file mode 100644 index 9926247..0000000 --- a/drivers/regulator/max77843.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * max77843.c - Regulator driver for the Maxim MAX77843 - * - * Copyright (C) 2015 Samsung Electronics - * Author: Jaewon Kim <[email protected]> - * Author: Beomho Seo <[email protected]> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/regulator/driver.h> -#include <linux/regulator/machine.h> -#include <linux/mfd/max77693-common.h> -#include <linux/mfd/max77843-private.h> -#include <linux/regulator/of_regulator.h> - -enum max77843_regulator_type { - MAX77843_SAFEOUT1 = 0, - MAX77843_SAFEOUT2, - MAX77843_CHARGER, - - MAX77843_NUM, -}; - -static const unsigned int max77843_safeout_voltage_table[] = { - 4850000, - 4900000, - 4950000, - 3300000, -}; - -static int max77843_reg_get_current_limit(struct regulator_dev *rdev) -{ - struct regmap *regmap = rdev->regmap; - unsigned int chg_min_uA = rdev->constraints->min_uA; - unsigned int chg_max_uA = rdev->constraints->max_uA; - unsigned int val; - int ret; - unsigned int reg, sel; - - ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, ®); - if (ret) { - dev_err(&rdev->dev, "Failed to read charger register\n"); - return ret; - } - - sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK; - - if (sel < 0x03) - sel = 0; - else - sel -= 2; - - val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel; - if (val > chg_max_uA) - return -EINVAL; - - return val; -} - -static int max77843_reg_set_current_limit(struct regulator_dev *rdev, - int min_uA, int max_uA) -{ - struct regmap *regmap = rdev->regmap; - unsigned int chg_min_uA = rdev->constraints->min_uA; - int sel = 0; - - while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA) - sel++; - - if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA) - return -EINVAL; - - sel += 2; - - return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel); -} - -static struct regulator_ops max77843_charger_ops = { - .is_enabled = regulator_is_enabled_regmap, - .enable = regulator_enable_regmap, - .disable = regulator_disable_regmap, - .get_current_limit = max77843_reg_get_current_limit, - .set_current_limit = max77843_reg_set_current_limit, -}; - -static struct regulator_ops max77843_regulator_ops = { - .is_enabled = regulator_is_enabled_regmap, - .enable = regulator_enable_regmap, - .disable = regulator_disable_regmap, - .list_voltage = regulator_list_voltage_table, - .get_voltage_sel = regulator_get_voltage_sel_regmap, - .set_voltage_sel = regulator_set_voltage_sel_regmap, -}; - -#define MAX77843_SAFEOUT(num) { \ - .name = "SAFEOUT" # num, \ - .id = MAX77843_SAFEOUT ## num, \ - .ops = &max77843_regulator_ops, \ - .of_match = of_match_ptr("SAFEOUT" # num), \ - .regulators_node = of_match_ptr("regulators"), \ - .type = REGULATOR_VOLTAGE, \ - .owner = THIS_MODULE, \ - .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table), \ - .volt_table = max77843_safeout_voltage_table, \ - .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \ - .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT ## num, \ - .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \ - .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT ## num ## _MASK, \ -} - -static const struct regulator_desc max77843_supported_regulators[] = { - [MAX77843_SAFEOUT1] = MAX77843_SAFEOUT(1), - [MAX77843_SAFEOUT2] = MAX77843_SAFEOUT(2), - [MAX77843_CHARGER] = { - .name = "CHARGER", - .id = MAX77843_CHARGER, - .ops = &max77843_charger_ops, - .of_match = of_match_ptr("CHARGER"), - .regulators_node = of_match_ptr("regulators"), - .type = REGULATOR_CURRENT, - .owner = THIS_MODULE, - .enable_reg = MAX77843_CHG_REG_CHG_CNFG_00, - .enable_mask = MAX77843_CHG_MASK | MAX77843_CHG_BUCK_MASK, - .enable_val = MAX77843_CHG_MASK | MAX77843_CHG_BUCK_MASK, - }, -}; - -static struct regmap *max77843_get_regmap(struct max77693_dev *max77843, - int reg_id) -{ - switch (reg_id) { - case MAX77843_SAFEOUT1: - case MAX77843_SAFEOUT2: - return max77843->regmap; - case MAX77843_CHARGER: - return max77843->regmap_chg; - default: - return max77843->regmap; - } -} - -static int max77843_regulator_probe(struct platform_device *pdev) -{ - struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent); - struct regulator_config config = {}; - int i; - - config.dev = max77843->dev; - config.driver_data = max77843; - - for (i = 0; i < ARRAY_SIZE(max77843_supported_regulators); i++) { - struct regulator_dev *regulator; - - config.regmap = max77843_get_regmap(max77843, - max77843_supported_regulators[i].id); - - regulator = devm_regulator_register(&pdev->dev, - &max77843_supported_regulators[i], &config); - if (IS_ERR(regulator)) { - dev_err(&pdev->dev, - "Failed to regiser regulator-%d\n", i); - return PTR_ERR(regulator); - } - } - - return 0; -} - -static const struct platform_device_id max77843_regulator_id[] = { - { "max77843-regulator", }, - { /* sentinel */ }, -}; - -static struct platform_driver max77843_regulator_driver = { - .driver = { - .name = "max77843-regulator", - }, - .probe = max77843_regulator_probe, - .id_table = max77843_regulator_id, -}; - -static int __init max77843_regulator_init(void) -{ - return platform_driver_register(&max77843_regulator_driver); -} -subsys_initcall(max77843_regulator_init); - -static void __exit max77843_regulator_exit(void) -{ - platform_driver_unregister(&max77843_regulator_driver); -} -module_exit(max77843_regulator_exit); - -MODULE_AUTHOR("Jaewon Kim <[email protected]>"); -MODULE_AUTHOR("Beomho Seo <[email protected]>"); -MODULE_DESCRIPTION("Maxim MAX77843 regulator driver"); -MODULE_LICENSE("GPL"); -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
