The patch
regulator: 88pm800: Fix indentation of assignments of data structures
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 4d45c70bfb3ffe55fad1d1681feaec2094f4da3b Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <vaibhav.hirem...@linaro.org>
Date: Thu, 16 Jul 2015 23:46:54 +0530
Subject: [PATCH] regulator: 88pm800: Fix indentation of assignments of data
structures
This patch makes code more clean from readability point of view,
make all assignments of LDO, BUCk and regulator_ops structure
at the same indentation.
Signed-off-by: Vaibhav Hiremath <vaibhav.hirem...@linaro.org>
Signed-off-by: Mark Brown <broo...@kernel.org>
---
drivers/regulator/88pm800.c | 68 ++++++++++++++++++++++-----------------------
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800.c
index 832932b..11f7ab2 100644
--- a/drivers/regulator/88pm800.c
+++ b/drivers/regulator/88pm800.c
@@ -95,11 +95,11 @@ struct pm800_regulators {
#define PM800_BUCK(vreg, ereg, ebit, amax, volt_ranges, n_volt)
\
{ \
.desc = { \
- .name = #vreg, \
- .ops = &pm800_volt_range_ops, \
- .type = REGULATOR_VOLTAGE, \
- .id = PM800_ID_##vreg, \
- .owner = THIS_MODULE, \
+ .name = #vreg, \
+ .ops = &pm800_volt_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PM800_ID_##vreg, \
+ .owner = THIS_MODULE, \
.n_voltages = n_volt, \
.linear_ranges = volt_ranges, \
.n_linear_ranges = ARRAY_SIZE(volt_ranges), \
@@ -108,7 +108,7 @@ struct pm800_regulators {
.enable_reg = PM800_##ereg, \
.enable_mask = 1 << (ebit), \
}, \
- .max_ua = (amax), \
+ .max_ua = (amax), \
}
/*
@@ -123,19 +123,19 @@ struct pm800_regulators {
#define PM800_LDO(vreg, ereg, ebit, amax, ldo_volt_table) \
{ \
.desc = { \
- .name = #vreg, \
- .ops = &pm800_volt_table_ops, \
- .type = REGULATOR_VOLTAGE, \
- .id = PM800_ID_##vreg, \
- .owner = THIS_MODULE, \
- .n_voltages = ARRAY_SIZE(ldo_volt_table), \
- .vsel_reg = PM800_##vreg##_VOUT, \
- .vsel_mask = 0x1f, \
- .enable_reg = PM800_##ereg, \
- .enable_mask = 1 << (ebit), \
- .volt_table = ldo_volt_table, \
+ .name = #vreg, \
+ .ops = &pm800_volt_table_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PM800_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(ldo_volt_table), \
+ .vsel_reg = PM800_##vreg##_VOUT, \
+ .vsel_mask = 0x1f, \
+ .enable_reg = PM800_##ereg, \
+ .enable_mask = 1 << (ebit), \
+ .volt_table = ldo_volt_table, \
}, \
- .max_ua = (amax), \
+ .max_ua = (amax), \
}
/* Ranges are sorted in ascending order. */
@@ -178,25 +178,25 @@ static int pm800_get_current_limit(struct regulator_dev
*rdev)
}
static struct regulator_ops pm800_volt_range_ops = {
- .list_voltage = regulator_list_voltage_linear_range,
- .map_voltage = regulator_map_voltage_linear_range,
- .set_voltage_sel = regulator_set_voltage_sel_regmap,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
- .is_enabled = regulator_is_enabled_regmap,
- .get_current_limit = pm800_get_current_limit,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_current_limit = pm800_get_current_limit,
};
static struct regulator_ops pm800_volt_table_ops = {
- .list_voltage = regulator_list_voltage_table,
- .map_voltage = regulator_map_voltage_iterate,
- .set_voltage_sel = regulator_set_voltage_sel_regmap,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
- .is_enabled = regulator_is_enabled_regmap,
- .get_current_limit = pm800_get_current_limit,
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_current_limit = pm800_get_current_limit,
};
/* The array is indexed by id(PM800_ID_XXX) */
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
