Hi Andy,

On Tue, Jul 21, 2015 at 12:59:31PM -0700, Andy Lutomirski wrote:
> This tests general modify_ldt behavior (only writes, so far) as
> well as synchronous updates via IPI.  It fails on old kernels.
> 
> I called this ldt_gdt because I'll add set_thread_area tests to
> it at some point.

Quick feedback : at two places you have this :

> +     } else if (errno == ENOSYS) {
> +             printf("[OK]\tmodify_ldt is returned -ENOSYS\n");

=> s/is //

Please add stdlib.h to avoid this warning I'm getting on 32-bit :

ldt_gdt.c:286:4: warning: incompatible implicit declaration of built-in 
function 'exit' [enabled by default]

And I had to remove xmmintrinsic as suggested by Boris as well.


FWIW here's what I'm getting here on 4.1.2 without CONFIG_X86_16BIT
(where nmi_espfix failed), the output is the same for a 32- and a 64-bit
process :

[OK]    LDT entry 0 has AR 0x0040FA00 and limit 0x0000000A
[OK]    LDT entry 0 has AR 0x00C0FA00 and limit 0x0000AFFF
[OK]    LDT entry 1 is invalid
[OK]    LDT entry 2 has AR 0x00C0FA00 and limit 0x0000AFFF
[OK]    LDT entry 1 is invalid
[OK]    LDT entry 2 has AR 0x00C0FA00 and limit 0x0000AFFF
[OK]    LDT entry 2 has AR 0x00D0FA00 and limit 0x0000AFFF
[OK]    LDT entry 2 has AR 0x00D07A00 and limit 0x0000AFFF
[OK]    modify_ldt rejected 16 bit segment
[OK]    LDT entry 2 has AR 0x00D07200 and limit 0x0000AFFF
[OK]    LDT entry 2 has AR 0x00D07000 and limit 0x0000AFFF
[OK]    LDT entry 2 has AR 0x00D07400 and limit 0x0000AFFF
[OK]    LDT entry 2 has AR 0x00507600 and limit 0x0000000A
[OK]    LDT entry 2 has AR 0x00507E00 and limit 0x0000000A
[OK]    LDT entry 2 has AR 0x00507C00 and limit 0x0000000A
[OK]    LDT entry 2 has AR 0x00507A00 and limit 0x0000000A
[OK]    LDT entry 2 has AR 0x00507800 and limit 0x0000000A
[OK]    LDT entry 2 has AR 0x00507800 and limit 0x0000000A
[RUN]   Test fork
[OK]    LDT entry 2 has AR 0x00507800 and limit 0x0000000A
[OK]    LDT entry 1 is invalid
[OK]    Child succeeded
[OK]    modify_ldt failure 22
[OK]    modify_ldt rejected 16 bit segment
[OK]    modify_ldt rejected 16 bit segment
[OK]    modify_ldt rejected 16 bit segment
[OK]    modify_ldt rejected 16 bit segment
[OK]    modify_ldt rejected 16 bit segment
[OK]    modify_ldt rejected 16 bit segment
[OK]    LDT entry 0 is invalid
[OK]    LDT entry 0 has AR 0x0040F200 and limit 0x00000000
[OK]    LDT entry 0 is invalid
[RUN]   Cross-CPU LDT invalidation
[FAIL]  5 of 5 iterations failed

Thanks,
Willy

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to