>I Wrote: >After 53 hours and 31 minutes it crashed. >dth pts/1 zaphod.dth.net Wed Aug 24 09:54 - crash (2+05:31) >reboot system boot 2.6.13-rc7 Wed Aug 24 09:51 (2+05:41) > >Prior to this kernel it had been running 2.6.12-mm1 without problems: >reboot system boot 2.6.12-mm1 Sun Aug 14 12:13 (9+21:36) > >I will now compile & run rc7-git1.
RC7-GIT7 barfed on me after some 20 hours: root ttyS0 Fri Aug 26 16:32 - crash (20:44) reboot system boot 2.6.13-rc7-git1 Fri Aug 26 16:32 (20:59) I managed to get some information from the serial console: scsi0: SCBPTR == 0x55, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff6e CDB 0 0 0 0 0 0 STACK: 0x10c 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:0:0): 0 waiting DevQ(0:1:0): NMI Watchdog detected LOCKUP on CPU0CPU 0 Modules linked in: rawfs rtc evdev hw_random i2c_amd8111 tg3 e100 mii w83627hf eeprom lm85 i2c_sensor i2c_isa i2c_amd756 i2c_core psmouse Pid: 168, comm: scsi_eh_0 Not tainted 2.6.13-rc7-git1 RIP: 0010:[<ffffffff802644f9>] <ffffffff802644f9>{serial_in+105} RSP: 0018:ffff81007fc17b80 EFLAGS: 00000002 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff80473a40 RBP: 0000000000002705 R08: 0000000000000020 R09: 0000000000007930 R10: 0000000000000034 R11: 000000000000000a R12: ffffffff80473a40 R13: ffffffff8045f6fe R14: 000000000000000d R15: 000000000000000d FS: 00002aaaab3cbe90(0000) GS:ffffffff80485800(0000) knlGS:00000000556ada40 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000515970 CR3: 000000007dc27000 CR4: 00000000000006e0 Process scsi_eh_0 (pid: 168, threadinfo ffff81007fc16000, task ffff8100033607c0) Stack: ffffffff8026682d 0000000500000002 ffffffff803ebc60 0000000000007931 000000000000000d 0000000000000096 0000000000000010 0000000000000046 ffffffff8012ed9c 000000000000793e Call Trace:<ffffffff8026682d>{serial8250_console_write+413} <ffffffff8012ed9c>{__call_console_drivers+76} <ffffffff8012f053>{release_console_sem+339} <ffffffff8012fbc9>{vprintk+601} <ffffffff8012fbc9>{vprintk+601} <ffffffff8012fc3e>{printk+78} <ffffffff80325a40>{thread_return+0} <ffffffff8012fc3e>{printk+78} <ffffffff8028c235>{ahd_print_register+261} <ffffffff802abc34>{ahd_platform_dump_card_state+100} <ffffffff80296b0d>{ahd_dump_card_state+8973} <ffffffff802ad320>{ahd_linux_abort+624} <ffffffff802aa590>{ahd_linux_sem_timeout+0} <ffffffff80284f5c>{scsi_error_handler+1324} <ffffffff8010e396>{child_rip+8} <ffffffff80284a30>{scsi_error_handler+0} <ffffffff8010e38e>{child_rip+0} Code: 0f b6 c0 c3 66 66 90 41 57 49 89 f7 41 56 41 55 41 bd 00 01 console shuts up ... <0>Kernel panic - not syncing: Aiee, killing interrupt handler! I don't know if this is enough information for the developers to go on. For me it's back to 2.6.12-mm1 *snif* Danny - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/