Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
 .../devicetree/bindings/clock/clock-bindings.txt   | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt 
b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index 06fc6d5..4137034 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -44,6 +44,45 @@ For example:
   clocks by index. The names should reflect the clock output signal
   names for the device.
 
+critical-clock:        Some hardware contains bunches of clocks which, in 
normal
+               circumstances, must never be turned off.  If drivers a) fail to
+               obtain a reference to any of these or b) give up a previously
+               obtained reference during suspend, it is possible that some
+               Operating Systems might attempt to disable them to save power.
+               If this happens a platform can fail irrecoverably as a result.
+               Usually the only way to recover from these failures is to
+               reboot.
+
+               To avoid either of these two scenarios from catastrophically
+               disabling an otherwise perfectly healthy running system,
+               clocks can be identified as 'critical' using this property from
+               inside a clocksource's node.
+
+               This property is not to be abused.  It is only to be used to
+               protect platforms from being crippled by gated clocks, NOT as a
+               convenience function to avoid using the framework correctly
+               inside device drivers.
+
+               Expected values are hardware clock indices.  If the
+               clock-indices property (see below) is used, then supplied
+               values must correspond to one of the listed identifiers.
+               Using the clock-indices example below, hardware clock <2>
+               is missing, therefore it is considered invalid to then
+               list clock <2> as a critical clock.
+
+For example:
+
+    oscillator {
+       #clock-cells = <1>;
+       clock-output-names = "ckil", "ckih";
+       critical-clock = <0>, <1>;
+    };
+
+- this node defines a device with two clock outputs, just as in the
+  example above.  The only difference being that 'ckil' and 'ckih'
+  are now identified as an critical clocks, so an OS will know to
+  never attempt to gate them.
+
 clock-indices:    If the identifying number for the clocks in the node
                   is not linear from zero, then this allows the mapping of
                   identifiers into the clock-output-names array.
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to