ChangeLog v2: - remove the patches to set the "latency code" of Spansion QSPI memories (support of Spansion memories may be submitted in later series). - rename "qspi" node into "spi" in the DT example to fit ePAPR standard. - remove the useless "qspi0" label from the DT node example. - remove the leading 0 from the size of the second memory region to make it consistent with the size of the first memory region. - indent the DT bindings documentation to make it more readable. - remove the useless ".bus = &platform_bus_type," line from the platform driver definition.
v1: This series of patches add support for the new Atmel QSPI controller embedded inside sama5d2x SoCs. These patches were first developped for linux-3.18-at91 and tested on a sama5d27 Xplained ultra board, which embeds a Micron n25q128a13 QSPI NOR flash memory. Then the series was adapted for mainline. Cyrille Pitchen (5): mtd: spi-nor: notify (Q)SPI controller about protocol change Documentation: mtd: add a DT property to set the number of dummy cycles mtd: spi-nor: allow to tune the number of dummy cycles Documentation: atmel-quadspi: add binding file for Atmel QSPI driver mtd: atmel-quadspi: add driver for Atmel QSPI controller .../devicetree/bindings/mtd/atmel-quadspi.txt | 29 + .../devicetree/bindings/mtd/jedec,spi-nor.txt | 6 + drivers/mtd/spi-nor/Kconfig | 7 + drivers/mtd/spi-nor/Makefile | 1 + drivers/mtd/spi-nor/atmel-quadspi.c | 900 +++++++++++++++++++++ drivers/mtd/spi-nor/spi-nor.c | 114 ++- include/linux/mtd/spi-nor.h | 15 + 7 files changed, 1053 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c -- 1.8.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/