Shorted lines over 80 characters long by reducing tab count. Signed-off-by: Andrew F. Davis <a...@ti.com> --- drivers/power/bq27x00_battery.c | 74 ++++++++++++++++++++--------------------- 1 file changed, 37 insertions(+), 37 deletions(-)
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index 2257bd4..203cf61 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c @@ -39,49 +39,49 @@ #include <linux/power/bq27x00_battery.h> -#define DRIVER_VERSION "1.2.0" +#define DRIVER_VERSION "1.2.0" #define BQ27XXX_MANUFACTURER "Texas Instruments" -#define BQ27x00_REG_TEMP 0x06 -#define BQ27x00_REG_VOLT 0x08 -#define BQ27x00_REG_AI 0x14 -#define BQ27x00_REG_FLAGS 0x0A -#define BQ27x00_REG_TTE 0x16 -#define BQ27x00_REG_TTF 0x18 -#define BQ27x00_REG_TTECP 0x26 -#define BQ27x00_REG_NAC 0x0C /* Nominal available capacity */ -#define BQ27x00_REG_LMD 0x12 /* Last measured discharge */ -#define BQ27x00_REG_CYCT 0x2A /* Cycle count total */ -#define BQ27x00_REG_AE 0x22 /* Available energy */ -#define BQ27x00_POWER_AVG 0x24 - -#define BQ27000_REG_RSOC 0x0B /* Relative State-of-Charge */ -#define BQ27000_REG_ILMD 0x76 /* Initial last measured discharge */ -#define BQ27000_FLAG_EDVF BIT(0) /* Final End-of-Discharge-Voltage flag */ -#define BQ27000_FLAG_EDV1 BIT(1) /* First End-of-Discharge-Voltage flag */ -#define BQ27000_FLAG_CI BIT(4) /* Capacity Inaccurate flag */ -#define BQ27000_FLAG_FC BIT(5) -#define BQ27000_FLAG_CHGS BIT(7) /* Charge state flag */ - -#define BQ27500_REG_SOC 0x2C -#define BQ27500_REG_DCAP 0x3C /* Design capacity */ -#define BQ27500_FLAG_DSC BIT(0) -#define BQ27500_FLAG_SOCF BIT(1) /* State-of-Charge threshold final */ -#define BQ27500_FLAG_SOC1 BIT(2) /* State-of-Charge threshold 1 */ -#define BQ27500_FLAG_FC BIT(9) -#define BQ27500_FLAG_OTC BIT(15) - -#define BQ27742_POWER_AVG 0x76 - -#define BQ27510_REG_SOC 0x20 -#define BQ27510_REG_DCAP 0x2E /* Design capacity */ -#define BQ27510_REG_CYCT 0x1E /* Cycle count total */ +#define BQ27x00_REG_TEMP 0x06 +#define BQ27x00_REG_VOLT 0x08 +#define BQ27x00_REG_AI 0x14 +#define BQ27x00_REG_FLAGS 0x0A +#define BQ27x00_REG_TTE 0x16 +#define BQ27x00_REG_TTF 0x18 +#define BQ27x00_REG_TTECP 0x26 +#define BQ27x00_REG_NAC 0x0C /* Nominal available capacity */ +#define BQ27x00_REG_LMD 0x12 /* Last measured discharge */ +#define BQ27x00_REG_CYCT 0x2A /* Cycle count total */ +#define BQ27x00_REG_AE 0x22 /* Available energy */ +#define BQ27x00_POWER_AVG 0x24 + +#define BQ27000_REG_RSOC 0x0B /* Relative State-of-Charge */ +#define BQ27000_REG_ILMD 0x76 /* Initial last measured discharge */ +#define BQ27000_FLAG_EDVF BIT(0) /* Final End-of-Discharge-Voltage flag */ +#define BQ27000_FLAG_EDV1 BIT(1) /* First End-of-Discharge-Voltage flag */ +#define BQ27000_FLAG_CI BIT(4) /* Capacity Inaccurate flag */ +#define BQ27000_FLAG_FC BIT(5) +#define BQ27000_FLAG_CHGS BIT(7) /* Charge state flag */ + +#define BQ27500_REG_SOC 0x2C +#define BQ27500_REG_DCAP 0x3C /* Design capacity */ +#define BQ27500_FLAG_DSC BIT(0) +#define BQ27500_FLAG_SOCF BIT(1) /* State-of-Charge threshold final */ +#define BQ27500_FLAG_SOC1 BIT(2) /* State-of-Charge threshold 1 */ +#define BQ27500_FLAG_FC BIT(9) +#define BQ27500_FLAG_OTC BIT(15) + +#define BQ27742_POWER_AVG 0x76 + +#define BQ27510_REG_SOC 0x20 +#define BQ27510_REG_DCAP 0x2E /* Design capacity */ +#define BQ27510_REG_CYCT 0x1E /* Cycle count total */ /* bq27425 register addresses are same as bq27x00 addresses minus 4 */ -#define BQ27425_REG_OFFSET 0x04 +#define BQ27425_REG_OFFSET 0x04 #define BQ27425_REG_SOC (0x1C + BQ27425_REG_OFFSET) -#define BQ27425_REG_DCAP (0x3C + BQ27425_REG_OFFSET) +#define BQ27425_REG_DCAP (0x3C + BQ27425_REG_OFFSET) #define BQ27000_RS 20 /* Resistor sense */ #define BQ27x00_POWER_CONSTANT (256 * 29200 / 1000) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
