Greg,
At this point I've got Reviewed-by from Rob on the binding and dts bits,
and Reviewed-by from Andy Gross on the complete patch series (v3).
I believe I've addressed all issues raised. Can you please add this
(v3) to drivers/misc?
Let me know if you want me to re-send anything.
Thanks very much.
-- Tim
On 07/17/2015 08:42 AM, Rob Herring wrote:
> On Thu, Jul 16, 2015 at 6:55 PM, Tim Bird <tim.b...@sonymobile.com> wrote:
>> This binding is used to configure the driver for the coincell charger
>> found in Qualcomm PMICs.
>>
>> Signed-off-by: Tim Bird <tim.b...@sonymobile.com>
>
> Reviewed-by: Rob Herring <r...@kernel.org>
>
>> ---
>>
>> Changes in v3:
>> - change charge-enable property to charger-disable
>> Changes in v2:
>> - remove 'qcom,' from example node name
>> - Added reference to parent node pm8941@0 and binding doc for it
>>
>> .../bindings/power/qcom,coincell-charger.txt | 48
>> ++++++++++++++++++++++
>> 1 file changed, 48 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
>>
>> diff --git
>> a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
>> b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
>> new file mode 100644
>> index 0000000..0e6d875
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
>> @@ -0,0 +1,48 @@
>> +Qualcomm Coincell Charger:
>> +
>> +The hardware block controls charging for a coincell or capacitor that is
>> +used to provide power backup for certain features of the power management
>> +IC (PMIC)
>> +
>> +- compatible:
>> + Usage: required
>> + Value type: <string>
>> + Definition: must be: "qcom,pm8941-coincell"
>> +
>> +- reg:
>> + Usage: required
>> + Value type: <u32>
>> + Definition: base address of the coincell charger registers
>> +
>> +- qcom,rset-ohms:
>> + Usage: required
>> + Value type: <u32>
>> + Definition: resistance (in ohms) for current-limiting resistor
>> + must be one of: 800, 1200, 1700, 2100
>> +
>> +- qcom,vset-millivolts:
>> + Usage: required
>> + Value type: <u32>
>> + Definition: voltage (in millivolts) to apply for charging
>> + must be one of: 2500, 3000, 3100, 3200
>> +
>> +- qcom,charger-disable:
>> + Usage: optional
>> + Value type: <boolean>
>> + Definition: definining this property disables charging
>> +
>> +This charger is a sub-node of one of the 8941 PMIC blocks, and is specified
>> +as a child node in DTS of that node. See ../mfd/qcom,spmi-pmic.txt and
>> +../mfd/qcom-pm8xxx.txt
>> +
>> +Example:
>> +
>> + pm8941@0 {
>> + coincell@2800 {
>> + compatible = "qcom,pm8941-coincell";
>> + reg = <0x2800>;
>> +
>> + qcom,rset-ohms = <2100>;
>> + qcom,vset-millivolts = <3000>;
>> + };
>> + };
>> --
>> 1.8.2.2
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
