On 30/07/15 16:13, Jon Hunter wrote:
>
> On 30/07/15 16:05, Jon Hunter wrote:
>>
>> On 30/07/15 15:33, Marc Zyngier wrote:
>>> On 30/07/15 15:11, Jon Hunter wrote:
>>>> The gic_init_bases() function initialises an array that stores the mapping
>>>> between the GIC and CPUs. This array is a global array that is
>>>> unconditionally initialised on every call to gic_init_bases(). Although,
>>>> it is not common for there to be more than one GIC instance, there are
>>>> some devices that do support nested GIC controllers and gic_init_bases()
>>>> can be called more than once.
>>>>
>>>> A 2nd call to gic_init_bases() will clear the previous CPU mapping and
>>>> will only setup the mapping again for the CPU calling gic_init_bases().
>>>> Fix this by only allowing the CPU map to be configured for the primary GIC.
>>>>
>>>> For secondary GICs the CPU map is not relevant because these GICs do not
>>>> directly route the interrupts to the main CPU(s) but to other GICs or
>>>> devices.
>>>>
>>>> Signed-off-by: Jon Hunter <jonath...@nvidia.com>
>>>> ---
>>>> This is a follow-up to the patch titled "irqchip: gic: Add a cpu map for
>>>> each GIC instance" and discussed here [1]. Based upon the discussion I have
>>>> re-worked and re-titled it approriately.
>>>>
>>>> [1] http://www.spinics.net/lists/kernel/msg2044421.html
>>>>
>>>> drivers/irqchip/irq-gic.c | 43 +++++++++++++++++++++++++------------------
>>>> 1 file changed, 25 insertions(+), 18 deletions(-)
>>>>
>>>> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
>>>> index a530d9a9b810..7566fe259d27 100644
>>>> --- a/drivers/irqchip/irq-gic.c
>>>> +++ b/drivers/irqchip/irq-gic.c
>>>> @@ -416,19 +416,26 @@ static void gic_cpu_init(struct gic_chip_data *gic)
>>>> int i;
>>>>
>>>> /*
>>>> - * Get what the GIC says our CPU mask is.
>>>> + * Setting up the CPU map is only relevant for the primary GIC
>>>> + * because any nested/secondary GICs do not directly interface
>>>> + * with the CPU(s).
>>>> */
>>>> - BUG_ON(cpu >= NR_GIC_CPU_IF);
>>>> - cpu_mask = gic_get_cpumask(gic);
>>>> - gic_cpu_map[cpu] = cpu_mask;
>>>> + if (gic == &gic_data[0]) {
>>>> + /*
>>>> + * Get what the GIC says our CPU mask is.
>>>> + */
>>>> + BUG_ON(cpu >= NR_GIC_CPU_IF);
>>>> + cpu_mask = gic_get_cpumask(gic);
>>>> + gic_cpu_map[cpu] = cpu_mask;
>>>>
>>>> - /*
>>>> - * Clear our mask from the other map entries in case they're
>>>> - * still undefined.
>>>> - */
>>>> - for (i = 0; i < NR_GIC_CPU_IF; i++)
>>>> - if (i != cpu)
>>>> - gic_cpu_map[i] &= ~cpu_mask;
>>>> + /*
>>>> + * Clear our mask from the other map entries in case they're
>>>> + * still undefined.
>>>> + */
>>>> + for (i = 0; i < NR_GIC_CPU_IF; i++)
>>>> + if (i != cpu)
>>>> + gic_cpu_map[i] &= ~cpu_mask;
>>>> + }
>>>>
>>>> gic_cpu_config(dist_base, NULL);
>>>>
>>>> @@ -977,13 +984,6 @@ void __init gic_init_bases(unsigned int gic_nr, int
>>>> irq_start,
>>>> }
>>>>
>>>> /*
>>>> - * Initialize the CPU interface map to all CPUs.
>>>> - * It will be refined as each CPU probes its ID.
>>>> - */
>>>> - for (i = 0; i < NR_GIC_CPU_IF; i++)
>>>> - gic_cpu_map[i] = 0xff;
>>>> -
>>>> - /*
>>>> * Find out how many interrupts are supported.
>>>> * The GIC only supports up to 1020 interrupt sources.
>>>> */
>>>> @@ -1028,6 +1028,13 @@ void __init gic_init_bases(unsigned int gic_nr, int
>>>> irq_start,
>>>> return;
>>>>
>>>> if (gic_nr == 0) {
>>>> + /*
>>>> + * Initialize the CPU interface map to all CPUs.
>>>> + * It will be refined as each CPU probes its ID.
>>>> + * This is only necessary for the primary GIC.
>>>> + */
>>>> + for (i = 0; i < NR_GIC_CPU_IF; i++)
>>>> + gic_cpu_map[i] = 0xff;
>>>> #ifdef CONFIG_SMP
>>>> set_smp_cross_call(gic_raise_softirq);
>>>> register_cpu_notifier(&gic_cpu_notifier);
>>>>
>>>
>>> Looks good.
>>>
>>> I think there is a another bug caused by 322895062 ("irqchip: gic:
>>> Preserve gic V2 bypass bits in cpu ctrl register"), where
>>> gic_cpu_if_up() only acts on the primary GIC. In the secondary GIC case,
>>> it will stay disabled.
>>>
>>> Mind fixing this while you're at it?
>>
>> Ah yes, I see. Ok, I will resend this with the other fix as a series.
>
> Hmmm, what about gic_cpu_if_down()? Looks like the only user is
> vexpress-tc2. Ideally it should pass the gic_nr. I could make it pass 0
> by default.
Yeah, I saw it too. Not a big deal (TC2 has a single GIC anyway), but
it'd be nice to have some form of symmetry between up and down.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
