From: Sanchayan Maity <maitysancha...@gmail.com> Sent: Monday, August 03, 2015 
11:10 PM
> To: ji...@kernel.org; linux-...@vger.kernel.org
> Cc: ste...@agner.ch; Duan Fugang-B38611; hof...@osadl.org;
> sanjeev_sha...@mentor.com; Estevam Fabio-R49496; knaac...@gmx.de;
> l...@metafoo.de; pme...@pmeerw.net; antoine.ten...@free-electrons.com;
> linux-kernel@vger.kernel.org; linux-arm-ker...@lists.infradead.org;
> Sanchayan Maity
> Subject: [PATCH] iio: adc: vf610: Add IIO buffer support for Vybrid ADC
> 
> This patch adds support for IIO buffer to the Vybrid ADC driver.
> IIO triggered buffer infrastructure along with iio sysfs trigger is used
> to leverage continuous sampling support provided by the ADC block.
> 
> Signed-off-by: Sanchayan Maity <maitysancha...@gmail.com>
> ---
>  drivers/iio/adc/Kconfig     |   4 ++
>  drivers/iio/adc/vf610_adc.c | 122
> +++++++++++++++++++++++++++++++++++++++++---
>  2 files changed, 120 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index
> 7c55658..4661241 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -337,6 +337,10 @@ config TWL6030_GPADC  config VF610_ADC
>       tristate "Freescale vf610 ADC driver"
>       depends on OF
> +     select IIO_BUFFER
> +     select IIO_TRIGGER
> +     select IIO_SYSFS_TRIGGER
> +     select IIO_TRIGGERED_BUFFER
>       help
>         Say yes here to support for Vybrid board analog-to-digital
> converter.
>         Since the IP is used for i.MX6SLX, the driver also support
> i.MX6SLX.
> diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
> index 23b8fb9..af72b9a 100644
> --- a/drivers/iio/adc/vf610_adc.c
> +++ b/drivers/iio/adc/vf610_adc.c
> @@ -34,8 +34,11 @@
>  #include <linux/err.h>
> 
>  #include <linux/iio/iio.h>
> +#include <linux/iio/buffer.h>
>  #include <linux/iio/sysfs.h>
> -#include <linux/iio/driver.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/trigger_consumer.h> #include
> +<linux/iio/triggered_buffer.h>
> 
>  /* This will be the driver name the kernel reports */  #define
> DRIVER_NAME "vf610-adc"
> @@ -170,6 +173,7 @@ struct vf610_adc {
>       u32 sample_freq_avail[5];
> 
>       struct completion completion;
> +     u16 *buffer;
>  };
> 
>  static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 }; @@ -505,12
> +509,22 @@ static const struct iio_chan_spec_ext_info vf610_ext_info[] =
> {
>       .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |  \
>                               BIT(IIO_CHAN_INFO_SAMP_FREQ),   \
>       .ext_info = vf610_ext_info,                             \
> +     .address = (_idx),                              \
> +     .scan_index = (_idx),                   \
> +     .scan_type.sign = 'u',                  \
> +     .scan_type.realbits = 12,               \
> +     .scan_type.storagebits = 16,    \
>  }
> 
>  #define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) {       \
>       .type = (_chan_type),   \
>       .channel = (_idx),              \
>       .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),     \
> +     .address = (_idx),                                              \
> +     .scan_index = (_idx),                                   \
> +     .scan_type.sign = 'u',                                  \
> +     .scan_type.realbits = 12,                               \
> +     .scan_type.storagebits = 16,                    \
>  }
> 
>  static const struct iio_chan_spec vf610_adc_iio_channels[] = { @@ -531,6
> +545,7 @@ static const struct iio_chan_spec vf610_adc_iio_channels[] = {
>       VF610_ADC_CHAN(14, IIO_VOLTAGE),
>       VF610_ADC_CHAN(15, IIO_VOLTAGE),
>       VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP),
> +     IIO_CHAN_SOFT_TIMESTAMP(32),
>       /* sentinel */
>  };
> 
> @@ -559,13 +574,21 @@ static int vf610_adc_read_data(struct vf610_adc
> *info)
> 
>  static irqreturn_t vf610_adc_isr(int irq, void *dev_id)  {
> -     struct vf610_adc *info = (struct vf610_adc *)dev_id;
> +     struct iio_dev *indio_dev = (struct iio_dev *)dev_id;
> +     struct vf610_adc *info = iio_priv(indio_dev);
>       int coco;
> 
>       coco = readl(info->regs + VF610_REG_ADC_HS);
>       if (coco & VF610_ADC_HS_COCO0) {
>               info->value = vf610_adc_read_data(info);
> -             complete(&info->completion);
> +             if (iio_buffer_enabled(indio_dev)) {
> +                     info->buffer[0] = info->value;
> +                     writel(0, info->regs + VF610_REG_ADC_HS);
The register is read only. After ADC_Rn is read, the coco bit is cleared.

> +                     iio_push_to_buffers_with_timestamp(indio_dev,
> +                                     info->buffer, iio_get_time_ns());
> +                     iio_trigger_notify_done(indio_dev->trig);
> +             } else
> +                     complete(&info->completion);
>       }
> 
>       return IRQ_HANDLED;
> @@ -612,6 +635,9 @@ static int vf610_read_raw(struct iio_dev *indio_dev,
>       switch (mask) {
>       case IIO_CHAN_INFO_RAW:
>       case IIO_CHAN_INFO_PROCESSED:
> +             if (iio_buffer_enabled(indio_dev))
> +                     return -EBUSY;
> +
>               mutex_lock(&indio_dev->mlock);
>               reinit_completion(&info->completion);
> 
> @@ -694,6 +720,81 @@ static int vf610_write_raw(struct iio_dev *indio_dev,
>       return -EINVAL;
>  }
> 
> +static int vf610_adc_buffer_postenable(struct iio_dev *indio_dev) {
> +     struct vf610_adc *info = iio_priv(indio_dev);
> +     unsigned int channel;
> +     int ret;
> +     int val;
> +
> +     ret = iio_triggered_buffer_postenable(indio_dev);
> +     if (ret)
> +             return ret;
> +
> +     val = readl(info->regs + VF610_REG_ADC_GC);
> +     val |= VF610_ADC_ADCON;
> +     writel(val, info->regs + VF610_REG_ADC_GC);
> +
> +     channel = find_first_bit(indio_dev->active_scan_mask,
> +                                             indio_dev->masklength);
> +
> +     val = VF610_ADC_ADCHC(channel);
> +     val |= VF610_ADC_AIEN;
> +
> +     writel(val, info->regs + VF610_REG_ADC_HC0);
> +
> +     return 0;
> +}
> +
> +static int vf610_adc_buffer_postdisable(struct iio_dev *indio_dev) {
> +     struct vf610_adc *info = iio_priv(indio_dev);
> +     unsigned int hc_cfg = 0;
> +     int val;
> +
> +     val = readl(info->regs + VF610_REG_ADC_GC);
> +     val &= ~VF610_ADC_ADCON;
> +     writel(val, info->regs + VF610_REG_ADC_GC);
> +
> +     hc_cfg |= VF610_ADC_CONV_DISABLE;
> +     hc_cfg &= ~VF610_ADC_AIEN;
> +
> +     writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
> +
> +     return 0;
> +}
> +
> +static int vf610_adc_update_scan_mode(struct iio_dev *indio_dev,
> +     const unsigned long *scan_mask)
> +{
> +     struct vf610_adc *info = iio_priv(indio_dev);
> +
> +     kfree(info->buffer);
> +     info->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
> +     if (!info->buffer)
> +             return -ENOMEM;
> +
> +     return 0;
> +}
> +
> +static const struct iio_buffer_setup_ops iio_triggered_buffer_setup_ops
> = {
> +     .postenable = &vf610_adc_buffer_postenable,
> +     .predisable = &iio_triggered_buffer_predisable,
> +     .postdisable = &vf610_adc_buffer_postdisable,
> +     .validate_scan_mask = &iio_validate_scan_mask_onehot, };
> +
> +static int vf610_adc_buffer_init(struct iio_dev *indio_dev) {
> +     return iio_triggered_buffer_setup(indio_dev,
> &iio_pollfunc_store_time,
> +             NULL, &iio_triggered_buffer_setup_ops); }
> +
> +static void vf610_adc_buffer_remove(struct iio_dev *indio_dev) {
> +     iio_triggered_buffer_cleanup(indio_dev);
> +}
> +
>  static int vf610_adc_reg_access(struct iio_dev *indio_dev,
>                       unsigned reg, unsigned writeval,
>                       unsigned *readval)
> @@ -714,6 +815,7 @@ static const struct iio_info vf610_adc_iio_info = {
>       .read_raw = &vf610_read_raw,
>       .write_raw = &vf610_write_raw,
>       .debugfs_reg_access = &vf610_adc_reg_access,
> +     .update_scan_mode = &vf610_adc_update_scan_mode,
>       .attrs = &vf610_attribute_group,
>  };
> 
> @@ -753,7 +855,7 @@ static int vf610_adc_probe(struct platform_device
> *pdev)
> 
>       ret = devm_request_irq(info->dev, irq,
>                               vf610_adc_isr, 0,
> -                             dev_name(&pdev->dev), info);
> +                             dev_name(&pdev->dev), indio_dev);
>       if (ret < 0) {
>               dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", irq);
>               return ret;
> @@ -806,15 +908,22 @@ static int vf610_adc_probe(struct platform_device
> *pdev)
>       vf610_adc_cfg_init(info);
>       vf610_adc_hw_init(info);
> 
> +     ret = vf610_adc_buffer_init(indio_dev);
> +     if (ret < 0) {
> +             dev_err(&pdev->dev, "Couldn't initialise the buffer\n");
> +             goto error_iio_device_register;
> +     }
> +
>       ret = iio_device_register(indio_dev);
>       if (ret) {
>               dev_err(&pdev->dev, "Couldn't register the device.\n");
> -             goto error_iio_device_register;
> +             goto error_adc_buffer_init;
>       }
> 
>       return 0;
> 
> -
> +error_adc_buffer_init:
> +     vf610_adc_buffer_remove(indio_dev);
>  error_iio_device_register:
>       clk_disable_unprepare(info->clk);
>  error_adc_clk_enable:
> @@ -829,6 +938,7 @@ static int vf610_adc_remove(struct platform_device
> *pdev)
>       struct vf610_adc *info = iio_priv(indio_dev);
> 
>       iio_device_unregister(indio_dev);
> +     vf610_adc_buffer_remove(indio_dev);
>       regulator_disable(info->vref);
>       clk_disable_unprepare(info->clk);
> 
> --
> 2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to